How to Clean Shark Vacuum Filter

If you own the Shark Vacuum cleaner, this article will explain why you should clean Shark Vacuum filter and the methods you can use to clean the Shark vacuum filter.

The shark vacuum cleaner is one of the popular vacuum cleaners available in the market. It is durable and efficient, making it the best vacuum cleaner for many people.

The shark vacuum cleaner comes at different models and prices. Some of the models are:

  • Shark navigator lift away deluxe ultra vacuum
  • Shark VacMop pro wet/dry vacuum
  • Shark navigator swivel pro complete upright vacuum
  • Shark rocket ultra light corded stick Vacuum.

This just to mention a few though. And now, we will consider why you should clean your Shark vacuum filter before considering how to clean Shark vacuum filter.

You can also check out The Best Robot Vacuum Models

Why Should you Clean your Shark Vacuum Filter

Regardless of the model of the Shark vacuum cleaner you possess, it is necessary to clean Shark vacuum filter regularly, because of some of the reasons listed below.

  • Naturally, your Vacuum cleaner should not be emitting any form of foul odor, so perceiving any unpleasant odor from your vacuum cleaner signifies it is the time of a clean up.
  • If the Motor of your Shark vacuum cleaner begins to produce weird sounds, it might mean your Vacuum cleaner needs to be thoroughly cleaned.
  • If the suction power of your Vacuum cleaner has drastically reduced, it means you will have to clean shark vacuum filter.

clean shark vacuum filter-2

How to Clean Shark Vacuum Filter: Warning

Before you proceed with the steps below to dismantle your Shark vacuum filter and  clearn. It is important that you follow these precautions listed in the article.

  1. Do not attempt to clean the Shark vaccum cleaner without unplugging it from the power outlet,as this can cause an electrical accident.
  2. Do not assemble the parts of the vacuum cleaner unless thoroughly dried to prevent the growth of mildews.

Failure to follow the first precaution can lead to electric shock and can Shark to damage or got burnt. Alsom the second precautionery measure is to ensure that your Shark Vacuum works perfectly when you are done cleaning and assembling the device

How to Clean Shark Vacuum Filter

The required procedure for cleaning Shark vacuum cleaner is simple and easy to follow.

The tools you will need to clean shark vacuum cleaner includes:

  • Warm and cold water
  • Nylon brush with a soft bristle
  • Tiny scissors or seam ripper
  • Trash can
  • Miccrofiber towels
  • Drying rack
  • A large bowl.

Once you have all these resoures available, you can follow the steps below to learn how to clean Shark vacuum filter to remove all dirt from it.

Disassemble the Shark Vacuum Cleaner

 The first step to take when attempting to clean Shark vacuum cleaner is to unplug it from the power outlet to avoid any unintended consequence. 

After unplugging the vacuum cleaner, disassemble it by taking out the handle hose, HEPA filters, foam/ felt filters, and the dust canister.

Empty and Clean the Dirt Canister

Take the dirt canister close to a trash can and empty its content into the trash can. Then wash the canister with soap and warm water.

Also, clean the crevice of the dirt canister with a toothbrush, clean with a microfiber towel, and leave to dry.

Note that it might take up to 24 hours before the dirt canister is adequately dried. 

Do not reassemble the dirt canister when it has not thoroughly dried.

Clean the Shark Vacuum Filter

The filter system in the Shark vacuum cleaner consists of one or two thick foam filters, one felt filter and a HEPA filter. So, you need to clean. Therefore, we will quickly give an overview of how to clean Shark vacuum filter after disassembling them.

How to Clean Foam / Felt Filters

It is not advised that you clean the foam/felt filters with soap; instead, simply rinse them in cold water, being cautious not to damage them.

After being thoroughly cleaned and rinsed, the filter(s) might not return to their original white look. 

It, however, should not be a source of concern as long as the filters are intact. If the filters are already disintegrating, you might have to get new filters.

The manufacturer of the shark vacuum cleaners recommend you clean the Foam/felt filters once a month

How to Clean Shark HEPA Filters

 The Shark HEPA filter is positioned behind the filter door on the lower front of the machine. Pull the door open to expose the HEPA filter, and then take it out. Allow the filter to dry completely after rinsing it thoroughly in cold water.

Replace the filters in the vacuum cleaner only after they have completely dried.

Clean the Rotating Brush

Follow these steps to clean the rotating brush of the vacuum cleaner.

  1. Separate the floor attachment from the handle to clean the rotating brush.
  2. Snip any dust or hair tangled in the brush with a pair of scissors.
  3. Gently do so to avoid damaging the bristles.
  4. Use a toothbrush to brush away the dust.

Clean the Hose

Before attempting to clean the Shark vacuum cleaner hose, confirm that it does not have any electrical component. You can do this by going through the owner’s manual that came with the cleaner.

If you have confirmed there is no electrical component in the hose, drop the hose into warm soapy water and use a soft bristled brush to clean the ends. Rinse and hang vertically to dry.

Reassemble the Shark Vacuum Cleaner

 After you have cleaned the dirt canister, foam/felt filter, HEPA filter, and the rotating brush and you must have allowed them to dry properly.

Preferably for a period of 24 hours, you can then reassemble the different parts in the shark vacuum cleaner.


This article has explained how to clean Shark vacuum filter, and we have shown that it is a relatively simple and easy process.

Leave a Comment