Have you been getting the Samsung washer SE code and wondered how to fix it? Then you are reading the right article, as this article will explain the reason for the Samsung Washer SE code and how to resolve it.
The Samsung brand is notable worldwide for various gadgets, and the Samsung washing machine is no different. Many users love it for various reasons such as reliability, efficiency, durability, hygienic steam, and other benefits.
However, like every other mechanical and electrical device, the Samsung washing machine can possibly develop certain faults, and one of the possible issues is the Samsung washer SE code error.
The sections of this article below will explain why the Samsung washer SE code occurs and possible solutions you can employ to resolve the issue.
Why does the Samsung Washer SE Code Error Occur?
When the Samsung washer SE code error appears on your washing machine during a wash cycle, it implies that the washer is having issues draining waste water away from it.
Possible reasons why the SE code might appear include:
- Clogged drain filter preventing water from going down the drain hose.
- The washer drain hose is clogged at the junction with the filter or its junction with the siphon.
- The drain pump might have issues that can prevent the washer from effectively draining wastewater.
The next section of the article will explain troubleshooting methods you can use to resolve the Samsung washer SE code error.
You can also check out What is Samsung Washer Self Clean
How to Fix Samsung Washer SE Code Error
There are various reasons why the Samsung washer SE code error might occur, and you can use several troubleshooting methods to resolve the error.
Below are some of the troubleshooting methods you can use to resolve the Samsung Washer SE code error.
Power Cycle the Washer
Turn off the Samsung washer and turn it back on to start another cycle, and the washer will drain at the beginning of the cycle.
Confirm the Drain Hose for Blockage
If the drain hose is clogged or not appropriately connected to the washer, the washer will not be unable to drain effectively.
If you recently installed the Samsung washer, you can check the connection to ensure it is properly connected.
If your washer drain hose is connected to a fixture, you can follow the instructions below to check the connection.
- Turn off the washer and disconnect the power and water supply.
- Confirm that the blanking hose has been removed from the connection between the hose and the spigot.
- Then confirm that the hose is installed correctly with no bends or kinks.
If your washer drain hose is connected to a standpipe, you can check that it is installed properly by following the instructions below.
- Turn off the washer and disconnect it from the power and water outlet.
- Then confirm that the drain hose is at least 23 inches above the floor.
- Then ensure that the standpipe is completely covering the drain hose and there are no more than 6 inches of drain hose in the standpipe.
- Finally, confirm that there are no bends or kinks in the hose.
If you have been using the Samsung washer for a while, there is a huge possibility that the drain hose might have been blocked.
Follow the steps below to unclog a blocked drain hose.
- Turn off the washer and disconnect the power and water supply.
- Remove the drain hose from the washer.
- Then unclog the hose using a drain snake tool or by washing the hose with hot water, white vinegar, and baking soda.
Unclog the Drain Filter
If you use the Samsung front loader washer, then you have access to the drain filter at the front of your washer, and cleaning it frequently ensures that the drain filter will function optimally.
If the drain filter of your washer is clogged, you can clean it by following the instructions below.
- Press the cover to open the access panel for the pump filter.
- Then locate the drain hose made of black rubber.
- Remove the white drain stopper from the hose, and drain the water into a large container, expecting some of the water to spill. Also, you might need some elbow grease to remove the plug’s airtight seal.
- Then hold the hose and twist the plug to remove it.
- Depending on the model, you can either push the pump filter in and turn it like a medication bottle or turn it counterclockwise and take it out.
- Now use soap and water to clean the filter, and to help remove dirt and debris, use a tiny toothbrush or a brush with soft bristles.
- Then put the filter back in the washer.
- Then replace the hose stopper and reattach the hose to its mounting clip.
- Now cover the access panel.
Check the Drain Pump
If the drain pump is defective, the washer will have difficulty draining waste water away from it.
You can check the drain pump for signs of damage by following the instructions below:
- Turn off the Samsung washer and disconnect it from its power and water supply source.
- Take off the Rear access panel if the washer is a front load washer.
- Then for a top-load washer, tape the lid to prevent it from opening, then turn the washer over so you can reach the drain pump underneath.
- Disengage the drain pump wire connector.
- Now examine the drain pump’s wire harness, and confirm that the wiring is secure and has not suffered any noticeable damage.
- Then unclamp the clamps holding the drain hose to the pump using pliers, then disconnect the drain hose.
- Then remove the mounting screws for the drain pump using a 5/16 inch socket.
- Then detach the drain pump from the washer and look for signs of damage or obstructions.
If you notice that the drain pump is damaged, the next course of action will be to get a replacement drain pump.
How to Fix Samsung Washer not Spinning
If your Samsung washer is not spinning during a wash cycle, it implies that you will not be getting clean clothes at the end of the cycle.
Attempt any or all of the troubleshooting methods below to fix it.
- Ensure that the washer is levelled, and if it is not, adjust as necessary.
- Ensure that the washer is not overloaded for one cycle.
- Open the washer door and evenly distribute the load around the washer.
- Open and clean the debris filter with warm water and soap, as a clogged filter might prevent the washer from spinning.
Samsung Error Codes and their Meaning
The Samsung washing machine has different error codes that help to detect various reasons why the washer is not performing optimally.
Recommended: How to Fix Samsung Error Code 107
Some of the common Samsung error codes are listed below.
- LO or FL: This error appears when there is an issue with the washer door lock.
- DS: This error will occur when the washer door is not locking at the beginning of a wash cycle.
- DC: This means that the load in the washer is unbalanced and needs to be redistributed.
- SUD: This means there are excessive suds in the washer during a cycle.
- IE: This implies that there is a water sensor failure.
- NF: This means that the washer takes too long to fill with water.
- LE: This implies a drop in the water level during a cycle.
- OE: This means there is an overflow of water during a wash cycle.
- NF1: This means the hot and cold water hoses were not connected correctly.
- TE: The water temperature is too high or too low.
- ND: The water from the washer is not draining.
- HR: This means there is a heater relay failure.
This article has discussed possible reasons for the Samsung washer SE code error and the different solutions you can employ to fix it. We also discussed various error codes on the Samsung washer and what they represent.