- Advertisement -

[Updated-Fixes]: Westinghouse TV remote not working

As they say, Every brand has a target customer. The Westinghouse TV is tailored for people who are not too bent on having a decorated TV, but, would love to save on energy and cost while still enjoying some important TV features.

But, once in a while, you might face some issues with your Westinghouse TV most especially with your Westinghouse Tv remote. Probably You are also stuck with your Westinghouse TV remote not working. You are at the Right Place.

First and foremost, there are some easy checks you can do right now, to troubleshoot your Westinghouse TV remote not working such as carrying out a reset or checking for a faulty battery.

If you have done these and you are not getting any positive results, keep reading cause, I will work you through 8 troubleshooting steps you can carry out when you are stuck with your Westinghouse TV remote not working

Let’s proceed

How to troubleshoot Westinghouse TV remote not working

There are a series of reasons why your Westinghouse TV remote fails to work with your TV. However, some are advanced and might need a repair or a complete replacement.

That said, I will be starting with the Easy troubleshooting steps

Check your Remote Batteries 

If you are stuck with your Westinghouse TV remote not working, the first thing to do is to check the batteries. Sometimes the batteries might be dead or too low to send signals to the TV.

While in some other instances, maybe the battery terminals are rusted and the batteries are not making a good connection with the terminals

In either case, you should check through and see what is wrong with it. If the batteries are dead, you need to replace them, however. if they are good and the terminals are not rusted.

Proceed to the next troubleshooting step

Pair your Westinghouse TV Remote Again.

Sometimes the reason why your TV remote isn’t working with your Westinghouse TV is a poor pairing process. Probably you didn’t pair it correctly.

If that’s the case,  here is the correct way of pairing them

How to Pair your Westinghouse TV Remote

The steps below explain how to pair your Westinghouse TV remote if you are a novice.

  • Get your remote and point it at your TV
  • Now press both the Rewind button with the Fast Forward button
  • While doing this, you should automatically see a message confirming the pairing.
  • Once you’ve seen the message, release the buttons
  • The mode buttons of your remote should flash two times to indicate a pairing process.

If after pairing, your Remote, you are still stuck with your Westinghouse TV remote not working you should proceed to the next troubleshooting step below

Carry out a Reset on your Westinghouse TV Remote 

how to reset Westinghouse TV remote

A reset simply clears out anything that is acting unresponsive in the remote while restarting it all over again. Since your battery remote isn’t dead, here is how you can reset your Westinghouse TV remote

How To Reset Westinghouse TV Remote

Resetting your Westinghouse remote can restore the TV to its state. The followings procedures explain how to do that in detail

  • Take out the back cover of your TV remote
  • Next, remove the batteries
  • Now, long-press the power button for 60 seconds immediately.
  • After doing that, place the batteries back into your remote. and power reset your TV by Unplugging from the power socket and plugging it back
  • Finally, use the remote to power your TV

Sync Up the Westinghouse TV Remote Again

If you are not experiencing any Positive response after trying the troubleshooting procedures above, then you should try resyncing the TV back with the remote

If you are unsure of how to do that follow the step below

How to Sync your Westinghouse Tv remote with your TV

It’s quite simple synchronizing your Westinghouse remote with your TV. Following the procedures below will guide you through to it.

  • Power on the Westinghouse TV
  • Press both the Mute button and Select button at the same time.
  • After doing that, wait for 2 blinks.
  • now, release the pressing and enter the code 991
  • Wait to see 2 blinks again.
  • Once you’ve done that, enter 1 and press the Volume Up key.
  • Now, point the remote to the TV while pressing the channel Up button
  • Finally, press the Select option and set the TV mode.

If after carrying this out you are still stuck with your Westinghouse TV remote not working try out the next step

Carry out a Power Scan 

If your Westinghouse TV remote has a limited button or you’ve tried all the steps above but you are stuck with your Westinghouse TV remote not working, then you should also try out a power scan.

If you are unsure of how to go about that follow the instruction below

How to Power scan your Westinghouse TV remote

If you don’t know how to do a power scan on your Westinghouse TV to fix the remote not walking, follow the steps below.

  • Hit the Clear TV button and wait for the light to blink on the indicator
  • Now, click the Power Button on the remote.
  • Once the light blinks, press the Arrow Up button while also pressing the key till your Westinghouse TV shuts off
  • As soon as it shuts down, press the # key and turn on your TV back

If after successfully doing this you are still stuck with your Westinghouse TV remote not working proceed to the next step.

Defective Remote Control Sensor On TV 

defective remote control sensor

In some scenarios, the remote might be working perfectly while the sensor on the TV itself isn’t responding. You might not be able to easily determine this unless you call for expert assistance.

Tinkering with the TV or disassembling the parts might not be something you are okay with. But if you are experienced with that, here is how you can troubleshoot that

Solutions:

Power off your Westinghouse TV and open the back panel of it

  • Locate the motherboard of your TV where you see a shiny black dome IR sensor
  • Now, wipe the sensor with a dry cotton swab or soaked in a little Alcohol to ensure it isn’t grimly
  • After doing this, check if there are any changes.
  • If there isn’t check for a damaged IR sensor and try to de-solder the damaged IR sensor and re-solder a new one

Malfunction of Remote Sensor 

The Westinghouse TV remote not working, While the sensor might seem to be malfunctioning, the issue behind your Westinghouse TV remote not working could be the remote infrared signal. Normally the sensor ought to produce these infrared signals so that you will be able to operate the TV.

If you are unsure about how to check for this follow these steps below.

How to check for your Westinghouse Remote Infrared signal

  • Power off your Westinghouse TV for 30 seconds
  • Now, Long press your Remote Power button for 30 seconds and release.
  • After doing this, try, Starting up your Westinghouse TV and checking if the remote is working.
  • If it isn’t Get your smartphone and Launch the camera application
  • Now, point your remote on the camera screen and press any button on the remote
  • if you do this carefully, you should see some infrared signal on the camera screen.
  • If you can’t see any, the remote sensor is not producing any signal and it might need a replacement

Signal Interference 

Sometimes you might be faced with a scenario where your Westinghouse remote system gets interfering signals with the remote sensor. Probably there is an FR transmitter nearby

In this scenario, the TV remote might pick sometime while sometime it won’t pick. In a scenario like this, here is what you should do

  • Ensure no obstacles or objects could block infrared signals in the room where you are situated
  • Keep devices away from your TV and your remote

Westinghouse TV Remote App

in a case where you are stuck with your Westinghouse TV remote not working, you can download the app from the google play store. The TV app enables you to control your Westinghouse Tv with your Smartphone. Here is the link to the app for android

Westinghouse TV Remote manual

You can also get a Westinghouse TV remote Manual as a PDF file depending on your model however there aren’t many differences between their interactions since they all include similar instructions on how to program the remote to your television.

You can find codes that work with most Westinghouse Roku TVs with this manual.

Download the manual over here

Westinghouse TV Remote codes 4 digit

Another alternative to using the Westinghouse TV App is to get a universal remote, however, to operate it you might need a remote code depending on your model.

Since you are looking for 4 digits remote code you can try out they are listed below

  • 0182
  • 0164
  • 0120
  • 1489
  • 0885
  • 0143
  • 3411
  • 1430
  • 1300
  • 0890
  • 1216
  • 1454
  • 5781
  • 1027
  • 1336
  • 1367
  • 1712
  • 5054
  • 5237
  • 1036
  • 4797
  • 0114
  • 1146
  • 3241
  • 3251
  • 0111
  • 1901
  • 2281
  • 3711
  • 3851
  • 5971
  • 5981
  • 1891
  • 2141
  • 0889
  • 1282
  • 1577
  • 0451
  • 1217
  • 1019
  • 1195
  • 1196
  • 1414
  • 1433
  • 0002
  • 0915
  • 0013
  • 5001
  • 5115
  • 5117
  • 5379

By now, you should have figured out how to deal with your Westinghouse TV remote not working, that said, below are commonly asked questions from other Westinghouse TV remote users

How to Sync a Westinghouse Remote

  • Power on the Westinghouse TV
  • Press both the Mute button and Select button at the same time.
  • After doing that, wait for 2 blinks.
  • now, release the pressing and enter the code 991
  • Wait to see 2 blinks again.
  • Once you’ve done that, enter 1 and press the Volume Up key.
  • Now, point the remote to the TV while pressing the channel Up button
  • Finally, press the Select option and set the TV mode.

Related Posts

Leave a Comment