- Advertisement -

What is Samsung Washer Code SE

Is the code SE appearing on your washer, and you have been wondering what the Samsung washer code SE means? Then read through this article to learn what it means and what you can do to resolve it any time it appears.

The Samsung washing machine is a trusted washing machine brand known to be efficient and reliable, with features that make it one of the best washing machines currently available in the market.

The Samsung washer rarely develops faults, although there are cases where it cannot be helped as it is still a mechanical device.

However, the Samsung washer has been made relatively easy because you will probably see an error code appear in your washing machine when it has issues.

One of the error codes is the Samsung washer code SE, and the remaining sections of this article will explain what it means and what you can do when it appears on your washing machine.

What is the Meaning of the Samsung Washer Code SE

The Samsung washer code SE, when you see it appear on your washing machine during a wash cycle, means that waste water is not being drained away from the washing machine the way it ought to.

There are various reasons why the Samsung washer code SE might appear on your device, and some of the commonly known issues include.

  • There could be problems with the drain pump, making it difficult for the washer to drain wastewater.
  • The wastewater might not be draining correctly due to a clogged drain filter.
  • The siphon or the washer drain hose’s intersection with the filter is obstructed.

Any of the reasons listed above could cause the Samsung washer code SE error to appear on your washing machine when you attempt a wash cycle.

Luckily, there are certainly known fixes that you can employ to resolve the issue, and they will be discussed in the article’s section below.

How to Fix Samsung Washer Code SE

The Samsung washer code SE error could arise from several causes, and you can use several troubleshooting techniques to fix it.

You can use the troubleshooting techniques below to fix the Samsung Washer SE code issue.

You can also check out What is Samsung Washer Self Clean

Power Cycle the Samsung Washing Machine

When the Samsung washer code SE appears, your first approach is to power cycle the device.

To power cycle the device, you only have to switch off the washing machine and turn it back on after a couple of seconds to start another cycle because the Samsung washer will drain the wastewater at the beginning of the cycle, removing the Samsung washer code SE error.

fix Samsung washer code SE

Recommended: How to Fix GE Dishwasher won’t start

Check the Drain Filter for Blockage

The drain filter is essential to the Samsung washing machine, particularly the front loader models. A blocked drain filter with debris or other particles can stop wastewater from draining into the washer, which would then cause the Samsung washer code SE error to appear.

You should regularly clean the drain filter to prevent it from being clogged.

However, if the filter is already clogged, you can follow the instructions below to clean it.

  • Turn off the Samsung washing machine.
  • Now open the cover to locate the access panel for the pump filter.
  • Then look for the black rubber drain hose.
  • Then remove the white drain stopper from the hose and drain the water into a big container. It would be best if you also prepared for water spillage.
  • Then use elbow grease to remove the airtight seal on the plug.
  • Next, while holding the hose, twist the plug out of the way.
  • The pump filter can either be inserted and turned like a medicine bottle, depending on the type, or it can be removed by turning it in the opposite direction.
  • Now use a small toothbrush or a brush with soft bristles to help remove dirt and debris and clean the filter with soap and water.
  • Now reinstall the filter in the washing machine.
  • The hose is then reattached to its mounting clip after replacing the hose stopper.
  • Then replace the hose stopper and reconnect the hose to its mounting clip.
  • Then close the access panel.

After cleaning the filter, you can attempt a wash cycle to see if you have resolved the Samsung washer code SE error.

Check the Drain Hose for Signs of Blockage

The washer won’t be unable to drain adequately if the drain hose is blocked or not connected to the washer correctly.

You should check the connection if you just installed the Samsung washer to ensure everything is connected correctly.

If your Samsung washer model uses a fixture, you can use the steps below to inspect the connection to know if your washer’s drain line is adequately attached to the fixture.

  • Switch off the washer and unplug the water and power supply.
  • Verify that the blanking hose is no longer attached to the spigot’s hose connection.
  • Next, ensure the hose is attached correctly and has no bends or kinks.

If your Samsung washer model connects the hose to a standpipe, you can follow the instruction below to ensure it is properly connected.

  • Switch off the washing machine and disconnect the power and water supply.
  • Now check that the drain hose is 23 inches above the floor.
  • After that, confirm that the standpipe entirely covers the drain hose and that there are no more than 6 inches of drain hose inside the standpipe.
  • Finally, check that the hose is free of kinks and bends.

However, if you notice the issue is that your drain hose is clogged, you can easily clean it by following the instructions below.

  • Turn off the washing machine disconnecting it from its power and water source.
  • Disconnect the drain hose from the washer.
  • Then use a drain snake tool to unclog the hose or wash it with hot water, vinegar, and baking soda.

Check the Drain Pump

The drain pump is integral to removing waste water from the washer, and should it be defective, and it would prevent the washer from draining water effectively.

Follow the instructions given below to check your drain pump for signs of malfunction.

  • Disconnect the Samsung washer’s power and water sources, then turn it off.
  • If the washer is a front-loading model, remove the rear access panel.
  • To access the drain pump behind a top-load washer’s cover, tape it shut so it won’t open. Then, flip the washer over.
  • Disconnect the wire connector for the drain pump.
  • Now check the drain pump wiring harness to ensure it is secure and free from any noticeable damage.
  • The drain pipe should then be disconnected after using pliers to release the clamps securing it to the pump.
  • Remove the mounting screws from the drain pump and detach the pump from the washer.

After removing the pump, inspect it for signs of damage, and if damaged, replace it with a new one.

How to Fix 5E Error on Samsung Washing Machine

The 5e code error on your Samsung washing machine implies that your washer is having draining issues.

You can potentially fix the issue by following the instructions below.

  • Switch off your washing machine, and use a level tool to check if it is leveled. If it is not, you should adjust it until it is leveled.
  • Then check the drain hose for signs of blockage; if the hose is clogged, you should clean it.
  • If your washing machine is a front-loader, you should check the drain filter to see if it is clogged and clean it.
  • Finally, turn on the washer and attempt a cycle; the water should drain at the beginning of the cycle.

What is the Samsung Washer Codes Error

The Samsung washer has various errors that help to diagnose common issues with the washing machine quickly.

Below are some of the Samsung washer codes.

NF: This code lets you know that washer is not filling up with water efficiently.

SUD: This code implies that you probably used low-grade detergents, so excessive suds are in the washer during a wash cycle.

OE: This code means water overflowing from the washer during a wash cycle.

DC: This code signifies a load imbalance in the washer during a wash cycle.

Samsung washer code error

Conclusion

This article has explained the meaning of the Samsung washer code SE, possible reasons why it might appear during a wash cycle, and how to resolve it.

Related Posts

Leave a Comment