Why is My Oculus Quest 2 blurry: The Oculus Quest 2 is one of the new inventions of Oculus (Which is owned by Facebook). After releasing the Oculus Quest VR Headset.
They felt there were a lot of changes they had to make since the majority of users had a series of issues they experienced while using the Oculus Quest Headset. So, Oculus made a new release called the Oculus Quest 2 headset.
The Headset comes at a much lesser entry price as compared to the former one. However, most users have complained about the blurriness they experience on their first usage.
The Oculus Quest device didn’t have these issues on the first try. However, it could be frustrating to experience this with an upgraded version of the Oculus Quest device.
Probably you are also stuck trying to figure out how to resolve the question; Why is my oculus Quest 2 blurry. You’re at the right place as we are going to break down the common reasons for the question “Why is my oculus Quest 2 blurry ” and how to troubleshoot it in a short time.
Why is My Oculus Quest 2 blurry?
If you have an Oculus Quest 2 device and you notice that it is blurry. In most cases, it is always due to changes in the performance setting from the factory due to some settle adjustment such as refresh rate, Distortion Curvature, Encode Resolution, or your Texture size.
Merely making little changes to these settings can affect the visual of your Oculus Quest headset. If yours is blurry, there must have been some adjustment somewhere from the factory.
However, without wasting much of your time let’s proceed to the various troubleshooting steps you should take to resolve the question “Why is my oculus Quest 2 blurry “?
1. Clean the Lenses
Now, out of the numerous things you can try, if you are experiencing a blurry screen. The first thing you might want to be sure of is the lens. Sometimes, it might not be the lenses but you can’t write it off.
Now, after cleaning the lenses with a moist material (avoid liquid or chemical cleaners) and the Oculus Quest 2 screen is still blurry, then you should proceed to the next troubleshooting step below.
2. Adjusting the headset and the straps
The Oculus Quest 2 comes with Fresnel focal points that include a progression of concentric rings, this leaves a tiny sweet spot distance.
To accomplish a sweet spot view. Firstly, you need to ensure that your headset is correctly linked with your pupil.
In hindsight what this means is, that you might need to keep adjusting your headset till it is perfectly aligned such that you can see it clearly.
It might feel a bit challenging trying this out as you might feel confused or uncomfortable. But, it’s easy you only need to make a little adjustment here.
Now, if you’re confused here is how you’ll go about it.
- Get your headset and remove the strap.
- After doing that put on the headset and try moving the headset at different angles, while making it a bit further from your eyes till you get an optimal result.
NOTE: if your eyes have different seeing power, you might want to carry this out for both eyes by closing the first one to figure out what position is optimal while doing it for the second eye.
Once you find an optimal direction then you might want to adjust the strap so that it is placed in that direction.
if after trying this and you haven’t figured out a way around “why is my oculus Quest 2 blurry” you might want to try out the next troubleshooting step.
3. Adjusting the Headset IPD settings
Now, adjust the IPD setting till you find the correct placement horizontally that sits well with your pupil. You have to move the headset horizontally.
Specific IPD setting you can start the adjustments from
Now, if you are not aware, get this. There are three IPD Values for the Oculus Quest 2 headset which are (58mm, 63mm, and 68mm).
While you are adjusting between these three IPD settings here is how you should do it.
Now, lets’ say you’ve adjusted it to 58mm and it is still blurry, tweak it along with a 1.5mm distance. What this means is you should adjust it to 58 +1.5mm and 5.8 – 1.5mm.
You should try this for the three values, however, after doing this you haven’t figured out the solution to “Why is My Oculus Quest 2 blurry”.
4. Change the Power Management Settings
Now, this blurriness is usually attached to users who are using the Oculus link. This might be because your computer reduces the power it’s sending to your Oculus with the link cable.
This usually causes an unsatisfying performance. If you are experiencing this, here is a quick way to resolve it.
- On your computer, tap on the windows key
- Now type power in the “search bar”
- Click on “additional Power settings“
- Now select “change power settings“
- Proceed to “change Advanced power settings“
- On the new window, locate “USB settings” and click it.
- Finally, Disable USB selective suspend settings.
After doing all these, the blurriness should reduce, however, if there are no changes, and you are still confused about the answer to “Why is my oculus Quest 2 blurry ” then you should try out the next troubleshooting step below.
5. Adjust Performance Settings
Over here, you might have to tinker with the render resolution and the refresh rate to improve the blurriness.
In case you are not aware of this, If you increase the refresh rate without increasing your render resolution, it could make the images blur.
Here is how you go about this.
- Launch the app on your computer
- On the left side of your screen locate and click on Devices
- Now choose Quest and Touch
- Finally, choose Graphics Preferences
On your computer, there are 4 different refresh rates you can choose from, while there are different resolutions too.
The only caviar to this troubleshooting trick is your hardware capacity, if your computer cannot handle a large resolution you might want to reduce it along with the refresh rate.
This trick might work for some, however, it might seem a bit stressful to try, unless you haven’t settled the issues of your Oculus Quest blurriness then you should give it a try.
Another troubleshooting step you should try after trying those above is to adjust the texture size
6. Adjust the Texture Sizes
Adjusting the texture tool surprisingly works like magic to resolve your Oculus Quest 2 blurriness, however, you have to adjust it using your PC with an app called Sidequest.
Here is how you can go about that
- Launch your PC and visit here to Launch your Oculus Account as a Developer.
- Next, In case you are using a Windows PC, you will need to install ADB Drivers else move to step 4.
- After it has been installed, reboot your PC.
- Now, launch Oculus app on your phone and go to the “menu tab” > “devices” > Developer Mode.
- Before you proceed, make sure your Oculus Quest headset is turned on and your Phone’s Bluetooth is On, and ensure your phone is connected to the same wifi as Quest Device.
- Now, Install Sidequest on your PC
- Launch SideQuest on your PC and connect your Headset to your PC via a cable and allow USB debugging on the headset.
- While doing that you will see a green circle will on the upper right corner near the sidequest logo, indicating you are now connected to SideQuest.
- Now, locate the wrench icon (device settings and tools) and select it.
- Scroll down to Default Texture Size and adjust it.
- A high number of users discovered that texture size 2048 is a great fit. But then it is all dependent on the hardware.
If after trying all these troubleshooting steps, you haven’t been able to resolve the question “why is my oculus Quest 2 blurry” then you might need to contact Oculus customer support. But before you do that. Try out the last troubleshooting step below.
7. Check for a Defective Lens
You should check your lens to be double sure it isn’t a defective lens. you don’t need to fret as your warranty already covers any lens-related issues you might be faced with.
If after trying all the troubleshooting steps above and you still stuck with the question “why is my oculus Quest 2 blurry”.
Your last option would be to contact the Oculus Support team to get it resolved.
Oculus Quest 2 Focus Adjustment
If you want to adjust your Oculus Quest headset for a better focus adjustment then you should first remove the strap and then turn the headset at different angles till you get a clear view from your pupil.
if that doesn’t work, you can adjust the IPD settings by simply adjusting them based on the three known IPD values.
In case you aren’t aware of them, they are 58mm, 63mm, and 68mm.
While you are adjusting between these three IPD settings here is how you should do it.
Now, lets’ say you’ve adjusted it to 58mm and it is still blurry, tweak it along with a 1.5mm distance. what this means is you should adjust it to 58 +1.5mm and 5.8 – 1.5mm.
You should also do these for the remaining IPD values.
Oculus Quest 2 Blurry Text
If your oculus quest 2 text is blurry, it also means the whole screen would also be blurry. To resolve these you need to try out the troubleshooting steps listed above which are
- Clean the Lenses
- Adjusting the straps and the headset
- Adjusting the Headset IPD settings
- Change the Power Management Settings
- Adjust Performance Settings
- Adjust the Texture Sizes
- Check for a defective lens
- Report to the Oculus Support team
After trying all these steps you should have answered the question “why is my oculus Quest 2 blurry” and found a way to resolve it.
Oculus Quest 2 Motion Blur
If you are struggling with motion blur issues on your Oculus Quest 2 headset. It is most likely caused due to the Pixels not turning on on time which could cause a blurry effect. It’s common on all Quest devices, most especially in a dark environment.
A motion blur issue is different from the “why is my oculus Quest 2 blurry” issue.
However, there isn’t a strong way to resolve this. However, you can simply ensure the Quest device is well fitted with a good eye distance.
Oculus Blurry without Glasses
You might not necessarily need to wear glasses when operating an Oculus Headset, however, if you can’t see something clearly when it is about 3m away without glasses then you might need to wear them in a VR headset.
You can always fit your glasses in your VR headset by adjusting the lens backwards so that your glasses can fit into the headset
Why is my Oculus Quest 2 Controller not Working
Sometimes you might notice that your oculus quest 2 controller isn’t connecting with the headset or it’s not working at all while it is paired. if you are faced with any of these scenarios, then you might want to try out these troubleshooting steps listed below.
1. Pair it Up again
The first thing you might want to be double sure of is that the controller is paired to the Oculus 2 Quest headset.
To do this, you simply have to unpair it and then pair it up again, if you are stuck as to how to do this simply follow the steps below.
- Get your Device and launch the Oculus app.
- Next, go to the menu tab by clicking on the Hamburg icon at the bottom right.
- Now, tap on Devices.
- Scroll down till you see Controllers, select it and pick your controller.
- Finally, select Unpair.
After doing this, try pairing it back again after 20 seconds to see if the controller is working fine with the headset.
If it isn’t, check the batteries
2. Reinsert or Change the Batteries
To check if the batteries are the issue, open the battery casing and remove it. Now install the batteries back into the controller. If you feel you’ve used it for a while and the batteries need a replacement, you can change it to a new one since the controller batteries are not chargeable.
If after checking and reinserting the battery, there are no changes. Restart the Oculus Quest 2 headset.
3 . Restart your Oculus Headset
Over here, all you have to do is Power off your Oculus Headset and give it at least 20 seconds before turning it back ON.
if this doesn’t fix the issue, you should try out the last recommended troubleshooting step which is to carry out a factory reset.
If you are unsure about how to do a factory reset, you should check here
If after carrying out a factory reset, the issue still persists, then you might need to contact Oulu customer support.
How to fix Blurry Oculus Quest 2
If your oculus screen is blurry, there are different troubleshooting steps you might want to consider before trying a factory reset on your device. Sometimes, it could be a dirty or defective lens or a simple adjustment issue with your headset.
Below are the few troubleshooting steps you should try if you are faced with a blurry Oculus Quest 2 screen.
- Clean the Lenses
- Adjusting the straps and the headset
- Adjusting the Headset IPD settings
- Change the Power Management Settings
- Adjust Performance Settings
- Adjust the Texture Sizes
- Check for a defective lens
- Report to the Oculus Support team
Conclusion:
Having an oculus quest device comes with its fair share of issues. When people come online to inquire about the question “why is my oculus Quest 2 blurry” it means it is a common issue with the Oculus Quest device.
However, while resolving these issues, you need to avoid using a magnet to adjust the IPD adjustment as some bloggers feel it works for older people. However, it is something you want to try at your own risk.