How to Connect Merkury Light Bulb to Wifi

Merkury light bulb is an impressive energy-saving light bulb that’s pretty easy to set up, it comes from a popular brand called Geeni and it has some cool features such as a lightning schedule, brightness change and Voice control making it support Google Home and Alexa. However, it’s not limited to that.

If you have one and you are looking for how to connect Merkury light bulb to Wi-Fi or Alexa or google home, you’re in the right place since I will be breaking down the steps you need to follow to do that

How to Connect Merkury Light Bulb to wifi

Since you’ve just gotten a merkury light bulb here are the steps you should follow if you want to connect it to your wifi

1. Get the Geeni App

Downloading’s and installing the Geeni app for your Merkury light bulb is paramount since that’s what you’ll be using to control the bulb from your smartphone

You can get the latest versions for both Android devices here and iPhone devices here. Also, it has a Windows and Mac version in case you use your PC more frequently

2. Register Your Geenie Account

After you’ve downloaded and installed the Geenie App (the merkury light bulb app), launch the app and follow the prompt on the app to create an account.

You need to enter the credentials that are required to open an account. After doing that Geenie will send you a confirmation code before you’re able to log in and fully access the app

3. Plugin and Turn On the Power

So the next step is to basically, unpack the bulb if you haven’t done that and then. insert it into a lamp holder just as similar to what you use for other common bulbs,

After screwing it in place you can power it on or OFF using the normal switch. Once they are plugged in their built-in memory will store the settings.

When compared to a 75watts bulb a merkury light bulb saves far more energy since it consumes just 11 watts of power giving lesser heat in general

(If it’s blinking at a slow rate, on for two seconds, then off for two seconds, that means it’s in “AP” mode. Check out Step 6 below.)

4. Ensure the Bulb is blinking

After screwing it into the lamp holder, turn the power ON, once it’s on, the bulb should be blinking on and off about twice a second. This scenario means the bulb is in “easy” programming mode.

That the bulb is blinking signals that it is in good working condition and waiting for instructions.

Next, open the Geeni app and look for your new bulb by clicking the “+” icon on the main page to put it in a “search for a new device” mode Now, instruct it to look for a new Merkury light.

The app should be able to identify your new bulb within a few seconds, it will ask if the bulb is blinking fast.

If it is enter yes.

Finally, you have connected the app to your new bulb

5. Customize Your Controls

Over here you can adjust some settings related to the bulb by trying out different shades of colour.

Also, try dimming the light with the phone.

With the genie app, their a lot of things you can do to the app as compared to just the physical switch such as dim the light, and schedule when you want the light to come up. and also you can group bulbs together

All these make you more comfortable and free to experiment!

Possible WiFi Issues

 how to connect Merkury light bulb

While connecting your Merkury bulb, if you noticed that it isn’t responding to the programming or maybe you’re not able to see the bulb name on the app, then it’s most commonly a wifi related problem

One thing you have to take note of the Merkury Bulb is that it only supports 2.4GHz frequency, if your router uses a 5.0 GHz it won’t work with it.

Most router comes with two frequency, and you can easily identify them by their SSID name, in most cases, a 2.4GHZ wifi will display something similar to 2.4 as the SSID name while a 5.0Ghz will also display 5.0 in the SSID name

If you are not able to change the frequency of the router you can do that by visiting the router website via the IP address.

Check here if you don’t know how to get the IP address of your Router.

Lastly, enter your login credentials and adjust the frequency

Since you’ve been able to figure out how to connect Merkury Light Bulb to wifi let’s delve into how to connect it to Alexa to give room for voice control.

How to connect merkury light bulb to Alexa

Connecting your Merkury Light bulb to Alexa makes controlling it quite easy, If you have An Alexa Echo Device and you would like to use it with your merkury light bulb follow the steps below

  • Launch your Amazon Amazon Alexa app
  • Next, click on the “+” symbol in the upper right-hand corner
  • Moving on, select “Add device”.
  • Under “All Devices” select “Light” > “Geeni” “Discover Devices”.
  • Alexa will work its magic and reconnect to your Alexa device!

How to Connect Merkury light bulb to Google Home

To connect your Merkury light bulb to google home here are the steps you need to follow

  • Launch the Google Assistant app.
  • Go to the Explore section and tap the compass icon. This icon is located at the top right corner
  • Next, tap the three-dots icon located in the upper-right corner of the screen.
  • After doing that go to settings
  • Navigate to the Service section and select Home Control.
  • choose the Plus icon (+) in the lower-right corner.
  • Navigate down till you see the Merkury Bulb
  • Other smart light bulbs you have installed will show here too
  • Simply sign in to your Geenie account and the lights you set up will appear in the devices under Home Control

since we discussed on  how to connect Merkury light bulb, let us delve into how to reset your merkury light bulb in case you are faced with any similar issue

How to Reset Merkury Light Bulb

 how to connect Merkury light bulb

There are a series of troubleshooting tips for your Merkury Bulb however, resetting your Light bulb seems to be the solution that works for any problem you might be facing.

If you want to reset your Merkury Light Bulb follow the instructions below.

Before you Commence: Ensure that your smart bulb is Powered ON, it might not be working yet but you still have to switch it ON to put it in a state to receive power.

  • Power on the switch
  • Next, Open the Geeni app. it’s available on the plays tore and app store in case you haven’t downloaded it yet
  • Now, open a Geeni account. You can use their Google or Apple integrations to make the sign up easier.
  • After Login in, On the “home tab” locate “+” at the top right corner and tap it.
  • Now, select “Smart Lighting”.
  • On the next screen, you will be asked whether your smart bulb is blinking quickly or not. Choose the applicable answer and then confirm your Wi-Fi password.
  • moving on select “yes it is blinking quickly”

Now, Your smart bulb will begin to reset and re-establish a connection with your WiFi network and your Merkury smart bulb should be fixed!

Note: Generally your Merkury smart bulbs will only work on the 2.4GHz band. So trying to connect a 5GHz won’t work.

Moving on, since you’ve been enlightened on how to connect Merkury Light Bulb below are commonly asked questions regarding this topic

Merkury smart bulb instructions

The Merkury Smart Bulb Instruction comes with the pack inform of a written manual, in case you can’t find yours you can check here to download a copy of the Merkury smart bulb manual

Merkury light bulb flashing

If you want to stop your Merkury light bulb from flashing, you need to power off the LED for two seconds, then on for another two seconds. After the fourth power cycle, the smart bulb will flash depicting a successful manual reset. What we did is simply reset this smart bulb model off/on five times.

Merkury light bulb not connecting

If your Geeni bulb isn’t connecting the first thing you should check is the wifi, probably there is a disconnect or the signal is weak, if the problem isn’t coming from the wifi router, then your best bet toward resolving this issue is to reset your merkury bulb.


By now, you should be well acquainted with how to connect Merkury light bulb to wifi. In addition, since you can’t write off issues while connecting it, you should try resetting it.

Leave a Comment