Are you stuck looking for how to resolve the series of errors Wyze cam keeps giving you? Maybe you are pissed off and you feel you’ve tried everything possible to resolve your device issues but it doesn’t seem to get any better.
Resetting your Wyze cam device might be the way to go but, before you do that you want to make sure that you’ve checked all the boxes of other possible troubleshooting options you ought to try.
Because, once you reset your Wyze cam device, it will delete all the customizations and settings you’ve previously made on the app, which could be something you don’t want to deal with,
However, if you’ve tried out all your options and you’re looking for How to Reset a Wyze camera device, you’ve come to the right place. because I will be delving into how exactly you reset your device, but before we proceed, you might want to check this post probably there might be one or two troubleshooting steps you can try before resetting.
However, to save you time, I have decided to list down the bullet point of troubleshooting tips you can try before you decide to reset your Wyze cam device.
They are listed below.
- Power cycle your Wyze cam device
- Check your frequency of your Wifi Router
- Check your Wifi Signal Strength
- Ensure you have no space in your SSID name
- Force close your Wyze app
- Flash an older firmware version to your Wyze Device manually
- Update your Wyze app
Note: you can get more comprehensive details about how to carry out these tips here if you don’t understand any of them.
Moving forward, after trying all these tips above, here is How to Reset Wyze camera devices.
How To Reset a Wyze Camera
Wyze camera device has a series of versions ranging from the V1 to V3 and the process of resetting each of them follows a similar pattern.
Below I will be delving into the steps you can follow on how to Reset a Wyze Camera V1 device.
How To Reset a Wyze Camera V1
If you are still using the Wyze cam V1 version device.
Wyze has updated its users that there won’t be any further support for this version so, to be on the safer side, getting a newer version is necessary.
Moving on, for those using a Wyze camera V1 device follow these steps closely to Rest it
- Remove the Micro Sd card from your Wyze cam V1 device without removing the power plug
- Now, locate the setup button at the back of the camera and long-press it for a minimum of 30 seconds
- After long-pressing it, release your finger and wait for a minute for the reset process to Finish.
- Once the Wyze cam V1 has completely been reset the solid yellow light will change to a blinking light
Since you’ve figured out how to reset a Wyze camera V1 device let’s process to the next version.
How to reset wyze cam v2
The Wyze cam V2 is the oldest version of Wyze cam that wyze still provides support to.
Apart from the support, it gets from Wyze lab, this version is compatible with both Alexa and google assistance when compared to the first version.
Now, if you have this version follow the steps below closely to Reset your Wyze V2 device.
- On your Wyze Cam V2 Device Carefully Remove the Micro SD card.
- Ensure that the power is still plugged in while doing this.
- Now, long-press the “Setup” button at the back of the camera for at least 5 seconds.
- After doing that, wait for a minute, by now the reset process should be completed
- Finally, you will notice that the solid yellow light has changed to a blinking light once the reset process is completed
Since you’ve figured out how to reset a Wyze camera V2 device let’s proceed to the next version.
How to Reset Wyze cam v3
The Wyze Cam V3 is the latest Wyze cam version. and it comes with some pretty nice upgrades such as using it outdoors since it comes with weatherproof features.
If you have a Wyze cam V3 version and you want to reset it follow the steps below
- On your Wyze Cam V3 Device Carefully Remove the Micro SD card.
- Ensure that the power is still plugged in while doing this.
- Now, press and hold the “Setup” button at the back of the camera for at least 10 seconds.
- After doing that, wait for 30 seconds – 1 minute, shockingly, the process can take up to 5 minutes but it is very rare
- Now, while you are waiting, once the LED status light changes from solid red to Flashing red it means it has completely been set up.
Since you’ve figured out how to reset a Wyze camera V3 device let’s proceed to the Wyze cam Pan versions.
How To Reset Wyze Cam Pan
The Wyze cam pan has some slight differences from other Wyze versions as it gives you a better view if you aim to capture a large room.
Its looks and structure differ from other wyze versions, but not all, it also has all the features of the Wyze cam V2 device with some other extra features.
Moving on, if you have a Wyze cam pan device follow the steps below to reset it
- Remove the Micro SD Card from the back of the device while keeping it plugged into a power source.
- Now, press and hold down the Setup button on the back of the camera for a minimum of 30 seconds.
- After doing this, wait for a minute and the yellow light at the back of the camera should start blinking.
Moving on to the upgraded version of Wyze cam pan
How To Reset Wyze Cam Pan V2
To reset a Wyze cam pan V2 device follow these steps below.
- Remove the Micro SD Card from the back of the device while keeping it plugged into a power source.
- Now, press and hold down the Setup button on the back of the camera for a minimum of 30 seconds.
- After doing this, wait for a minute and the yellow light at the back of the camera should start blinking.
Since you’ve figured out how to reset a Wyze camera device let’s proceed to the commonly asked questions.
Wyze cam Reset Button not working
If your Wyze cam reset button is having issues, you need to get a replacement for it otherwise contact the Wyze support staff and forward your complaints to them.
Note: once you open up your Wyze device, you have voided your warranty.
Reset Wyze doorbell
Note: If you are troubleshooting your Wyze doorbell or chime, it is a good practice to submit a log before performing the reset.
In addition to that, Resetting your Wyze doorbell device changes your initial setting back to your default settings. however, if you want to move forward with this. follow the steps below
- Long press the button on the side of Wyze Chime Pro for 3-5 seconds
- Next, wait until it says “Reset successfully“.
- Now, the Wi-Fi signal LED will begin to flash a red > solid yellow > flashing yellow.
- Finally, the device is now ready to be set up again.
Reset Wyze Video Doorbell Pro?
if you have a Wyze video doorbell pro device here is how you can reset it.
- Make sure the video doorbell is connected to a power outlet.
- Next, press the Reset button on the back of the device. Doing this will automatically reset your device back to its factory settings. you don’t need to press and hold.
How to Power Cycle Wyze Camera
Carrying out a power cycle is an easy process.
If you want to power cycle your Wyze camera follow the steps below
- Remove your Wyze camera from the power outlet.
- Now, wait for 30 seconds or mo
- Plug the power cable into the Wyze camera and back to the power source.
- Now, turn on the Wyze camera.
After following through with the steps listed above, your Wyze camera will be completely discharged while fixing any previous error.
How to Reprogram Wyze Camera
To reprogram your Wyze cam device, simply follow the Steps highlighted to reset it which are:
- Remove the Micro SD Card from the back of the device while keeping it plugged into a power source.
- Now, press and hold down the Setup button on the back of the camera for a minimum of 30 seconds.
- After doing this, wait for a minute and the yellow light at the back of the camera should start blinking.
Conclusion
By now, you should have figured out How to reset a Wyze camera easily.
Now, since you have a Wyze cam device, you want to be aware of some practices such as updating both the Wyze app and the firmware to limit the occurrence of error because wyze firmware might become unstable over time due to the series of updates and extra features they are adding to their products.
Also, if after resetting your Wyze cam device the issues you are stuck with still persists, then you should contact Wyze customer support.