How to Troubleshoot Maytag Washer

The Maytag Washer should be regularly maintained just like every other home appliance. The front load washer requires regular cleaning of a dirty drain pump filter. The common reason to learn about Maytag washer troubleshooting tips includes not draining, not spinning, leaking, noise, and odour issues.

When your Maytag washer is not working well, the solution to some of these problems is easy and you can easily fix them by yourself. Some of the solutions may include switching up detergents, levelling the washer, or tightening the drain hose. Although some of the issues with your Maytag washer might require the help of a professional.

Here in this article, we would discuss general Maytag washer troubleshooting procedures that you can easily follow to fix any issues you are faced with using your Maytag washer.

Maytag Washer Troubleshooting

What are the first to-do Maytag troubleshooting tips before deciding to call an expert for inspection? Check out our recommended tips to troubleshoot your Maytag washer below.

Kinked or Clogged Drain Hose

Trace the drain hose at the bottom back of your washer and check for kinks or leakages in the hose. If the hose is kinked ensure you straighten the hose so that water can adequately flow through. If the pipe is clogged remove the drain hose and clear the clogs thoroughly. Lastly, if you found out that there is a leak in the drain hose ensure you replace the drain hose.

Wrong Spin Selection

The gentle, delicate, or handwash cycles use slow spins to keep fabrics from stretching and wrinkling while also leaving more water in the washer. Therefore ensure you select a cycle that uses high spin speeds like the normal cycle. Make sure you get more familiar with your washer settings to help you in selecting the right spin.

Incorrect Drainpipe Installation

If the height of the end of the drain hose that connects to the drain pipe is not correctly installed above the floor this can lead to a draining issue. For Maytag washers, the drainpipe should be installed at a min of 39 inches and a max height of 96 inches from the bottom of your washer. If the drain pipe is installed too high the washer would fail to adequately pump water from the compartment.

Maytag washer won't spin

Maytag Washer Won’t Spin

If the washer fails to spin properly you won’t be able to rinse your clothes and water won’t drain out of the tub. This issue often occurs due to a power surge or power failure.

Maytag washer troubleshooting includes checking the circuit breaker and ensuring that your load is balanced and the washer is levelled.

Recommended:  Dryer Won’t Spin

Check Circuit Breaker

If the power supply to your washer is not up to 120v or 240 volts as required by your Maytag washer model this won’t be enough to power the spin cycle. Also during the surge in power supply, it may have tripped off the circuit breaker. So ensure you switch on the circuit breaker in case it trips off.

Unbalanced or Overloaded washer

If the wash load is unbalanced or overloaded this may lead to the issue of your Maytag Washer not spinning. Ensure the wash load is tightly packed and well balanced.

Unlevelled Washer

If your washer is not levelled it would become unbalanced and may prevent the washer from spinning properly. Which makes it important to always level your washer.

How To Level Maytag Washer

Make sure that all four front feet of your Maytag washer are installed, also make sure your washer is well-levelled front to back and side to side.

  • To level plastic feet, turn the feet clockwise to lower the feet or counter-clockwise to raise the feet as needed.
  • To level metal feet, turn the feet clockwise to lower the feet or counter-clockwise to raise the feet as needed.
  • Make sure the lock nuts on the feet are tight against the bottom of the cabinet.

Maytag Washer Leaking Water

Maytag Washer Leaking Water

Water is supposed inside the washer, but you may discover the appearance of water on the floor. To fix this issue clean the door seal, tighten the connecting hose, and clean the drain pump filter.

Recommended: Fix your Refrigerator Leaking Water

Check Door Seal

Wipe clean the door seal using a damp cloth to remove dirt particles or debris. Gently pull the seal back to check if there is something lodged under it. If you find tears in the seal, it has to be replaced.

Check The Drain Hose

Ensure the fill hose and drain hose are firmly connected to your washer. Check the rubber washer on the fill hose and ensure it is not missing. If it is missing or damaged then it has to be replaced. Also, ensure you properly tighten all the hoses.

Maytag Washer Noise

If your washer is making a strange sound this could be a warning that you need to fix the washer. But this is not general as some sounds are general and it is also quite normal for a new washer to make noise.

Clicking or Metallic Sound

Lots of washers have lids that make clicking noises at the beginning of a cycle when they are locking in place. Sometimes you may also hear the sound of metal items like zips or buckles when they hit the stainless steel basket. Always ensure you empty the pockets of your clothes before putting them in the washer.

Humming and Gurgling Sound

The pump or motor often makes a continuous humming sound when the washer is in a wash cycle. Making a long gurgling or surging sound as water is being removed from the washer during the spin or drain cycles.

Rattling or Vibration Sound

When your washer is off balance or unlevel while running, it would give a rattling sound. This is often caused by overloading the washer with heavy clothes. Ensure you remove some items from the washer load if tightly packed together and try to balance the load inside the washer.

Clunking and Grinding Sound

When your washer switches modes from agitation to a full spin, the washer would make a clunking or thumping sound.

 If your Maytag washer is making a metal banging, grinding, or any other strange sound you should contact a professional.

Maytag washer has odor

Maytag Washer Has Odor

You can use the self-clean cycle if it is available in your Maytag washer model to properly clean the compartment. The odour from your washer is a result of being left a load for a long time or using much detergent and fabric softener. All these can lead to the growth of mould and mildew. They can also lead to a bad oozing odour from your washer.

Maytag washer troubleshooting steps to remove odour from your washing machine include.

Remove Clothes From The Washer

Ensure you immediately remove clothes from your washer after a cycle and transfer them to your dryer or simply activate a cycle that continues to tumble them.

Use Less Detergent

When you use too much detergent in the washer may leave behind residue which would mix with soil, water, and air and result in the growth of mold and mildew which often cause odor.

You only need to fill detergent up to the first line for a normal load using the detergent cap as a measurement guide, and that is about a tablespoon of detergent

Maytag washer troubleshooting steps to get rid of odor in the washing machine includes clean the soap, bleach, and detergent dispensers thoroughly. You can use a toothbrush to scrub the dispensers to ensure they are well cleaned. You can also use chlorine bleach if it is compatible with your Maytag washer model.

How To Reset Maytag Washer

To reset your Maytag washer ensure your washer is plugged into a power source with all indicators off.

  • Ensure your washer is in standby mode
  • Press and hold the start or pause button for 3 seconds to turn off the indicator light.
  • To reset the washer, rotate the cycle selector knob counter-clockwise (left) to clear any sequence.

We have been able to comprehensively compile various Maytag Washer Troubleshooting steps to fix your washer by yourself. However, if this issue gets complicated or doesn’t solve your Maytag washer issues then you should contact a professional.

Leave a Comment