Is your Frigidaire ice maker not working but the water dispenser still works? Don’t get yourself worked up, this article will show you the most common causes that inhibit Frigidaire ice makers from working and also the possible solutions to get your ice maker to work again.
After a long sunny day or on a hot summer day, you might want to take a chilled iced juice or tea and you can’t get it because your Frigidaire ice maker just stopped working! It can be frustrating, I know.
Your Frigidaire ice maker not working could be caused by several reasons ranging from the ice maker switch getting turned off accidentally by itself, water reservoir may be empty, freezer too warm or ice maker water supply line may be blocked and you might need to defrost the frozen line by disconnecting the refrigerator for a few hours.
Frigidaire products include ice makers in most of their refrigerator models. Although they are luxury, just like any other gadget, they can develop one issue or the other anytime without prior notice.
If your Frigidaire ice maker is giving you issues and it won’t work properly, resetting it usually fixes the problem. Here in this article, you will learn why your Frigidaire ice maker won’t work, how to reset it and other possible DIY steps you could try all by yourself to reinstate your ice maker. Read on!
Why is my Frigidaire ice maker not making ice?
This usually is due to the water filter being clogged or a restricted water supply. It is recommended to change the water filter first but if the condition still occurs then you want to check for a saddle valve, a water valve not turned on all the way, or a kinked water supply line.
- Clogged Water Filter: Check to see if the water filter is not blocked once you discover that your refrigerator ice maker is not working. You might need to change the water filter.
- Faulty Door Seal: Temperatures become unstable with warm air oozing into the fresh food door once there’s a bad door seal that won’t close.
- Faulty Door Switch: The door switch might be faulty and once the door switch fails, the dispenser will not turn on. When the freezer door is opened, the freezer door switch does two things: it turns on the light in the freezer and turns off the ice maker and dispenser.
- Faulty Ice Maker Assembly: The ice maker assembly itself may be faulty once the ice maker stops working. There are different components in the control module of the ice maker that can fail, and most are sold together not separately.
- Faulty Water Inlet Valve: In situations where the temperature is correct but the ice maker won’t still work, then it implies the water inlet valve may be faulty. The water inlet valve is an electrically-controlled mechanical valve that opens to supply water to the dispenser and ice maker concurrently.
- Freezer Temperature is Above 10 Degrees F (-12 C): Always check the temperature of the freezer once you discover your Frigidaire ice maker is not working. Once the freezer temperature is above 10 degrees F (-12 C) the ice maker will stop working properly. However, when the temperature is set between 0 and 5 degrees F (-18 to -15 C), it functions best.
- Low Water Pressure: The water pressure in the house may be too low if the ice maker still doesn’t work. The water inlet valve connected to the ice mater is programmed to work with at least 20 psi of water pressure.
- Ice Maker Switch Switched Off: Check to see if the ice maker got turned off accidentally. However, if the switch is turned on but the ice maker won’t still work, check the switch for continuity with an Ohm meter and replace it if needed.
- Ice level control board: The ice level control board may be faulty if the Frigidaire ice maker not working. The refrigerator is fitted with an infrared light beam to find the level of ice in the ice bucket. Once the ice level reaches the top, the beam is interrupted and the ice maker turns off.
- Ice Maker mold Thermostat: If the ice maker mold is faulty, the ice maker won’t advance. The thermostat is located inside the control module of the ice maker which monitors the temperature of the ice mold (ice tray). The ice maker begins a harvest cycle once the mold gets to the proper temperature by ejecting the ice cubes and refilling them with water.
Any of the above will make your Frigidaire ice maker not working. You can ensure all is right by rectifying any of the issues that pertain to your Ice maker or try all for maintenance practice. 
Where is the ICE Maker Switch on a Frigidaire Refrigerator?
In case you do not know where the ice maker switch is located on a Frigidaire refrigerator, simply follow the steps below:
- There’s an “I/O switch” located by the side on rear-mounted ice makers.
- For recent models, there’s a control panel that helps in controlling the ice maker.
- At times, this control panel is located on the front of the refrigerator or you will find it by the side of the door once you open it.
How do you Reset a Frigidaire ICE Maker?
In case you want to perform a simple reset on your Frigidaire ice maker, follow the steps below:
- Tap on the On/Off switch till the LED light turns red.
- Wait for about 15 minutes.
- Long-press on the On/Off button again till the LED light turns green.
You have successfully reset a Frigidaire ice maker. Now, the Frigidaire ice maker not working has been fixed.
How to fix Frigidaire ICE Maker Not Working
There are several ways to fix the Frigidaire ice maker not working, some of them are as follows. Ensure to follow the steps to fix the issue about your problem:
Clean the Frigidaire ICE Maker
Once the ice maker is located in the freezer part of your refrigerator, then it’s bound to freeze harmful bacteria in the water, making it very important to clean except if you are comfortable with getting ice cubes with pathogens and dirt.
You need the following items to clean your Frigidaire ice maker; clean dry clothes, pieces of lemon/lemon juice, gloves, sponges, warm water, Vinegar, and detergent powder or mild cleaning solution.
Follow these steps to clean your ice maker;
- Disconnect your Frigidaire ice maker or fridge before cleaning to avoid being electrocuted in case you tamper with some wires in the process.
- Remove your ice bin from the ice maker and ensure you put on hand gloves to avoid contaminating the ice and also to prevent your hands from freezing.
- Clean the inside and outside of your Frigidaire ice maker with warm water mixed with a mild detergent.
- Ensure you rinse off the soapy water to remove any soap because this can contaminate your ice cubes and make them taste soapy.
- Another way is to use a mixture of lemon, vinegar, and warm water to clean your ice bin and the interior of the ice maker. This will prevent you from getting soap-tasting ice cubes.
- Make use of a soft clean cloth to dry off the Ice Bin’s interior part and the exterior part of your Frigidaire.
- Ensure the ice bin is completely dried off before placing it gently back inside the Frigidaire.
- Finally, plug in your ice maker or refrigerator back for it to commence ice making.
Defrost the Frigidaire ICE Maker
Follow these simple steps to defrost your ice maker:
- Disconnect the refrigerator and remove all ice from the ice maker and also the ice tray.
- Change the position of any food near the ice maker to a different spot in the freezer or refrigerator.
- Look for the water refill tube that runs to the ice maker.
- If you see a small metal clip that holds the tube in place, ensure to pull it down and remove it.
- You can power on a hair dryer at low speed and point it close to the refill tube to defrost.
- With the aid of a towel dry the water as the frost melts, and be careful not to melt any plastic parts in the ice maker or freezer to prevent serious damage.
- In case you don’t want to use a hairdryer, gently place the ice tray under the tube to get the water and pour a little amount of hot water over the tube with a small cup or container.
- Now, replace the metal clip and the ice tray before connecting the refrigerator back.
If defrosting the ice maker does not fix the Frigidaire ice maker not working issue, then dry the next solution.
How do I Force my Frigidaire ICE Maker to Cycle?
Wondering how you can force your Frigidaire ice maker to cycle? You can follow the steps below. The process of forcing your Frigidaire ice maker to run through a cycle is a very common troubleshooting technique anytime you encounter ice production problems.
Ice makers are usually equipped with a shut-off mechanism that stops ice production once the storage bin reaches maximum capacity.
To force the Frigidaire ice maker to cycle, follow the steps below:
- Open the freezer door to enable you to remove the ice bin from under the ice maker.
- Remove the ice from the bin.
- Then, replace the bin in the freezer by sliding it back into position against the back of the freezer.
- Most ice makers have a cut-off mechanism that stops ice production once the bin is wrongly placed. This also helps to prevent ice from spilling out inside the freezer.
- Turn the ice maker toggle switch to the “On” setting if it has not yet been activated.
- Remove the front cover of the ice maker with the tip of a flat-blade screwdriver.
- Turn the gear in front of the ice maker clockwise till you hear a click, then replace the cover.
- Thrust or force the rectangular wire arm on the side of the ice maker into a downward position.
- This sensor arm will alert the ice maker to halt ice production once the storage bin is full.
- Once the wire is in an upright position, the unit will not make any more ice.
That’s it! You have successfully force the Frigidaire ice maker to cycle.
ICE Maker Error Code
Frigidaire ice maker also displays error codes when Frigidaire ice maker not working. Follow the simple steps below to check for the ice maker error code:
- First, check the control panel to see if an error code is a reason why your ice maker is not making ice.
- Locate the error code in your owner’s manual or online.
- The owner’s manual will tell you if a part has failed and may also detect one of the above problems earlier stated.
How to Fix Frigidaire Ice Maker not Making Enough ICE
In case your Frigidaire ice maker is not making enough ice, then your freezer temperature may have been set too warm. You need to set the freezer control to a colder setting to improve ice production. Wait for about 24 hours to allow the temperature to stabilize.
Peradventure your ice maker isn’t producing ice at all or is producing crescents or cubes that are way smaller than the usual size, then it’s an obvious indication that there’s a clog somewhere along the supply line.
The common cause of a clog is frozen water in the supply line. The water filter is clogged and there’s a restricted flow of water supply in the line. To fix the issue of the Frigidaire ice maker not working, follow the steps below:
- Repair a frozen line by sliding the refrigerator and unplugging it.
- You can as well change the water filter first but if the condition still happens then you might have to check for a saddle valve.
- A water valve not powered on all the way or a kinked water supply line may have caused the clogging.
How do I Make my ICE Maker make more ICE?
Here’s how to make your ice maker begin making more ice. Follow the steps below:
- First, lower the temperature of the freezer.
- The water in the ice tray freezes faster, which triggers the tray thermostat to warm and release the ice, which begins the process all over again.
- To enable your ice maker to work faster, simply lower the freezer temperature by 3-5 degrees.
That’s it! You have been able to make your ice maker make more ice.
Feel free to drop comments below if this article was worthwhile and helped you fix Frigidaire ice maker not working issues. Thanks for reading thus far.