We would guide you through how to connect stealth 700 to Xbox using a Bluetooth connection in this guide. The stealth Gen 2 Xbox is designed for smartphone users, tablets and gaming consoles such as the Microsoft wireless Xbox.
It uses a wireless connection to pair with your Xbox console. The pairing method is quite straightforward.
With that being said, we would guide you through how to connect stealth 700 to Xbox in this article.
How To Connect Stealth 700 to Xbox
Follow the steps below to pair your stealth 700 headphone to your Xbox console.
- Press and hold the power button on the Headset until the LED light is displayed.
- Power on the Xbox One Console by pressing the Console’s Power button.
- Press the Pairing Button on the Xbox One Console. Depending on your Xbox one model: For older Xbox one models, the pairing button is located on the left side of the console, close to the disk drive. While for Xbox One S and Xbox One X models, the pairing button is on the lower right of the front panel.
- The LED on the Console would begin to blink to indicate that the Xbox console is in pairing mode.
- Press and hold the connect button on the headset until the Power LED begins to flash quickly to indicate that the headset is in pairing mode.
- Within a few seconds, the LED light will turn solid, a headset-assigned message will be displayed on the console and the headset will give a tone.
- This indicates that the headset and console are being successfully paired and you would hear the game audio on your headset.
Why Won’t My Turtle Beach Stealth 700 Connect Xbox?
Your Turtle Beach Stealth 700 connection won’t connect to your Xbox if a device such as a router or another high-powered wireless device is causing wireless interference between the console and headset.
Also, software bugs from outdated firmware can prevent your Turtle beach stealth 700 from connecting to your Xbox. If your Turtle beach stealth 700 won’t connect to your Xbox, Follow these troubleshooting steps:
Put Headset and Xbox in Pairing Mode
When you Put your headset and Xbox in pairing mode, it indicates your devices are ready to be connected.
To put your Xbox in pairing mode: press the pairing button on the Console and the LED on the console would begin to blink.
To put the headset in pairing mode: press and hold the connect button on the headset until the LED light flashes quickly.
Check Connection Status
After completing the pairing process, now check to confirm if your headset is successfully paired to the Xbox console. If they are successfully paired together the LED light on both devices will turn solid within a few seconds. The console will l make a tone and a headset-assigned message will display on the console. Then finally you would begin to hear the game audio on your headset.
Update Headset Firmware
For a better audio experience, always ensure the firmware of your Stealth 700 is running on the latest version.
- Connect your Stealth 700 to your PC or Mac using the included USB Cable.
- Open the Turtle Beach Audio Hub app. The app is available for Windows and Mac.
- If there is a new update available, your headset will prompt you to begin the update process. During an update ensure you do not disconnect your headset until the update is complete.
Update Xbox Firmware
There are 2 ways you can update the firmware of your Xbox, you can either automatically or manually update the firmware of your Xbox,
To automatically update your Xbox:
- Press the Xbox button.
- Select Profile & system > Settings > System > Updates.
- Then select Keep my console up to date under the updates option.
To automatically update your Xbox
To manually update your Xbox anytime:
- Connect your console to the internet.
- Press the Xbox button.
- Select Profile & system> Settings > System > Updates.
- Select the console update available to start your update. If your console is up to date you will see no console update available.
Reset Xbox
Simply turning off and on your, Xbox can help to fix temporary glitches or connectivity issues. Follow these steps to reset your Xbox:
- Power off your Xbox console.
- Disconnect the power cable from your Xbox console and wait about 20 seconds.
- Reconnect the power cable to your Xbox console.
- Power On your Xbox with the use of the power button in front of your Xbox Console.
- Reconnect your headset to your console, using the pairing button on your Headset and the pairing button on your Xbox Console.
- Once your Headset and Console are now paired, connect the controller through a USB cable to the console and turn on your controller.
Additional tips:
- Move the headset closer to the console
- Remove or power off any WIFI router or other high-powered wireless device that is near your Xbox and headset. Your router may have caused wireless interference between the console and the headset.
How to Connect Turtle Beach Stealth 700 to PS5
Here is a quick step you can follow that would guide you on how to connect stealth 700 to Xbox. Follow these steps on how to connect Turtle Beach Stealth 700 to PS5:
- Connect the mini transmitter to a USB Port on the PS5 console.
- Then power on your headset. The headset and transmitter should be paired and a solid light will be displayed on the LED.
- Now go to Settings >> Sound >> Audio Output >> Output Device.
- Select Stealth 700 as the output device, set the output to Headphones to All Audio and Set Volume Control (headphones) level to Maximum.
- Adjust your microphone levels. Navigate to Settings >> Sound >> Microphone >> Adjust Mic Level >> Microphone Level.
How Do I Pair My Turtle Beach Stealth 700?
If you get stranded and you want a quick step that would guide you on how to connect stealth 700 to Xbox. Follow these steps to pair your turtle beach stealth 700:
- Press and hold the power button on the Headset until the LED light is displayed.
- Power on the Xbox One Console by pressing the Console’s Power button.
- Press the Pairing Button on the Xbox One Console.
- The LED on the Console would begin to blink to indicate that the Xbox console is in pairing mode.
- Press and hold the connect button on the headset until the Power LED begins to flash quickly to indicate that the headset is in pairing mode.
- The LED light will turn solid within a few seconds. A headset-assigned message will be displayed on the console and the headset will give a tone.
- You would hear the game audio on your headset.
How Do I Connect My Stealth Headset To My Xbox One?
If you are stuck on how to connect stealth 700 to Xbox here is a quick guide to connect your stealth headset to your Xbox one:
- Press and hold the power button on the Headset until the LED light is displayed.
- Power on the Xbox One Console by pressing the Console’s Power button.
- Press the Pairing Button on the Xbox One Console.
The LED on the Console would begin to blink to indicate that the Xbox console is in pairing mode. - Press and hold the connect button on the headset until the Power LED begins to flash quickly to indicate that the headset is in pairing mode.
- The LED light will turn solid within a few seconds. A headset-assigned message will be displayed on the console, the headset will give a tone.
Does Stealth 700 Work on Xbox One?
The Stealth 700 Gen 2 Xbox is designed to be used with a wireless connection which is also known as Xbox Wireless. It uses a wireless connection to pair directly to your Xbox console.
You need to press the pairing button on the headset and the console to establish a connection. within a few seconds, the LED light will turn solid. A headset-assigned message will be displayed on the console while the headset will give a tone.