If you own an Apple smartwatch and you have been having issues with it and would like to learn about how to reset it, here in this guide we will look into how to reset an Apple watch; you can follow the same steps to reset your Apple watch and turn it into a brand new watch without any installed apps or personal configuration.
The Apple Watch is Apple’s smartwatch model that bears the excellence trademark of Apple; it is a device that has incorporated wireless communication alongside fitness tracking and several health-oriented capabilities.
With the Apple smartwatch, getting on track with your fitness regimen is very easy, as you can track your process in real-time.
However, like every other device, the Apple smartwatch might sometimes develop issues that would make it function less than its capabilities; At the same time, this is not something that happens quite often; it can still be quite stressful when it occurs.
The good news, however, is that most issues with the Apple smartwatch can be resolved once you are able to reset the Apple smartwatch.
You can learn all that you need to know on how to reset an Apple watch from the remaining sections of this article.
How to Reset An Apple Watch
The Apple Watch is an amazing device to own, but once you notice that it is no longer working as well as it used to, or you run into issues by inputting the wrong passcode too many times, you might have no option but to reset the Apple smartwatch.
You can use different methods to reset an Apple watch, and we will discuss them in this section of the article.
How to Reset An Apple Watch using the Watch itself
This is usually the best method you can use to reset an Apple watch, especially when you do not have your paired iPhone with you.
You can reset an apple watch using the Watch by following the instructions below.
- Open your Apple watch and click on the settings menu.
- Then click on general and tap the reset option.
- Then click the erase all content and settings option, and input your password if prompted.
- Then if you use the GPS + Cellular model, you can choose to keep or remove your plan. However, it is advised that you keep your plan if you still pair your iPhone with your Watch.
- Then click on the erase all to confirm the option to completely reset your Apple Watch to its factory settings.
If you have followed the instructions above, your Apple watch should have been reset to its factory default settings, and you can now set it up for use to confirm that it is working as expected.
You can also check out How to Tell if Apple Watch is Charging.
How to Reset an Apple Watch Using an iPhone
If you have an iPhone paired to your Apple watch, it is usually very easy to reset your Apple Watch using the iPhone.
You can use your iPhone to reset an Apple Watch as long as both devices are paired by following the instructions below.
- Place your Apple Watch and iPhone nearby so you can unpair them.
- Then launch the Apple Watch app on your iPhone.
- Then click on my watch tab and select all watches.
- Then click the info button icon next to the watch you want to unpair.
- Then click the unpair Apple Watch option to unpair the watch from your iPhone.
- Then click on unpair (your Apple watch name)
- Then choose to keep or remove your GPS cellular plan if you are using the GPS cellular model, although it is advisable to keep the plan if you’d still like to connect the watch to your iPhone.
- Then input your Apple ID password to disable the activation lock.
- Then click on unpair, and the content and settings on your Apple Watch will be erased.
You do not have to worry about losing your content and settings, as a backup of your content is always created before your Apple watch is reset to its factory settings, so you can always restore them if you feel like it.
If you have followed the instructions above, it implies that you have been able to reset an Apple watch using your iPhone successfully, and you can now set up the Apple watch and start using it as you deem fit.
You can use any of the methods explained in this article section to reset an Apple Watch.
How to Reset An Apple Watch if You Forgot your Apple Watch Passcode
If you have forgotten the passcode for your Apple Watch, the only available solution is to reset it using either the watch itself or a paired iPhone.
You can follow the instructions below to reset an Apple watch that you have forgotten its passcode.
- Connect your Apple Watch to its charger and ensure that it is connected all through the process of resetting the device.
- Then press and hold the side button until the power button appears on the upper-right corner of your screen.
- Then press down the digital crown until the erase all content and settings option appears on your screen.
- Then click on reset, and tap reset again to confirm your selection.
- Then wait for the reset process to complete itself.
If you have followed the instructions above, you have been able to reset your Apple watch successfully, and you can now set it up and input a new passcode that you can remember.
You can also use a paired iPhone to reset your Apple watch when you have forgotten the passcode by following the instructions below.
- Place the Apple Watch and iPhone close to each other throughout the process.
- Then launch the Apple Watch app on your iPhone and click my watch tab.
- Then click on General and select reset.
- Then click erase Apple watch content and settings, and click on the option again to confirm your selection.
- Then enter your Apple ID password if prompted.
- Then select the option to either remove or keep your plan if you are using the GPS cellular model, although it is advised to keep the plan if you would still be pairing the watch to your iPhone.
- Then wait for the reset process to complete itself automatically.
Once you are done following the instructions above, you can set up your Apple watch with a new passcode and start using it without encountering any further issues.
How to Unpair Apple Watch
If you want to unpair your Apple watch from your iPhone, you can achieve this by following the instructions below.
- Put the Apple watch and iPhone in close proximity.
- Then, open your iPhone’s Apple Watch app and click my watch tab.
- Then click on all watches and tap the info button close to the watch you want to unpair.
- Then click on unpair Apple Wach and tap unpair (your watch name)
- Then choose if you want to keep or remove your cellular plan if you are using the GPS cellular model.
- Then input your Apple ID password to deactivate the activation lock.
- Finally, click on the unpair button.
If you have followed the instructions above, you have been able to unpair your Apple watch from your iPhone successfully.
How to Reset Apple Watch Without Phone
If the iPhone you paired with your Apple Watch is out of reach, you can still reset your Apple watch by following the instructions below.
- Click on the settings menu on your Apple watch.
- Then select General and click on reset.
- Then click erase all content and settings, and if prompted, input your passcode.
- Then if you use the GPS cellular model, you can choose to remove or keep your cellular plan.
- Then click erase all to restore your Apple Watch to its factory settings.
If you have followed the instructions above, you have been able to successfully reset your Apple watch without using a phone.
Conclusion:
This article has given a detailed explanation of how you can reset an Apple watch.
We also explained how to unpair your Apple watch and how to reset the watch if you have forgotten your passcode.