Do you want to learn how to clean shark rotator vacuum? Then read through this article, as we will be looking at how to clean shark rotator vacuum, including all of its various components.
The shark rotator vacuum is one of the many models of the Shark vacuum cleaner, which is known for its efficiency, affordability, and durability.
The shark vacuum cleaner models, including the shark rotator vacuum, are among the most sought after vacuum cleaners in the market because they offer different models and prices, so you can always have a vacuum cleaner that fits your cleaning needs and your budget.
Some of the other brands of the Shark vacuum cleaner apart from the shark rotator vacuum includes:
- Shark VacMop pro wet/dry vacuum
- Shark navigator lift away deluxe ultra vacuum
- Shark Vertex Cordless Vacuum with DuoClean PowerFins
- Shark navigator swivel pro complete upright vacuum
- Shark rocket ultra light corded Stick Vacuum.
Suppose the shark vacuum cleaner of your choice is the Shark rotator vacuum. In that case, you must know, like all the other types of shark vacuum cleaner, the shark rotator vacuum frequently accumulates dirt, dust, and debris due to regular use.
In the section below, we will be looking at when you should clean shark rotator vacuum and how to clean shark rotator vacuum.
When to Clean Shark Rotator Vacuum
If you notice the following signs listed below when using your Shark rotator vacuum, then you should know it is time to clean your Shark rotator vacuum.
- Suppose your shark rotator vacuum is generating any offensive odor. In that case, you should know it is time to clean it, as your shark rotator vacuum should naturally not generate any unpleasant smell.
- When your Shark vacuum is generating unwanted noises when it is in use, it means it is time to clean your shark rotator vacuum.
- If you realize that the suction power of your shark rotator vacuum has tremendously decreased, it implies that you have to clean the shark rotator vacuum as soon as possible.
How to Clean Shark Rotator Vacuum
The required steps to clean shark rotator vacuum are pretty straightforward, and the tools needed for the cleaning process are easy to find and not complex to use.
You can also check out How to Empty a Shark Vacuum Cleaner
The following are the required cleaning tools to clean shark rotator vacuum.
- Clean water.
- A soft bristle brush.
- Microfiber towels.
- A trash can.
- A seam ripper or a pair of tiny scissors.
- A large bowl.
- A drying rack.
The steps required to clean shark rotator vacuum is explained below.
Disassemble the Shark Rotator Vacuum Cleaner
The first step you have to take before attempting to disassemble or even clean the shark rotator vacuum cleaner is to unplug it from the power outlet to avoid any form of accident.
After Unplugging, you can then begin to disassemble the various components of the shark rotator vacuum, such as the HEPA filter, the foam/felt filter, the dust canister, and the handle hose.
Clean the Dust Canister
Empty and clean the dust canister by placing it near a trash can and emptying its contents into it. The canister should then be washed with soap and warm water.
Clean the nooks of the dust canister with a toothbrush, then dry with a microfiber cloth.
It’s worth noting that the dust canister can take up to 24 hours to dry.
Do not reassemble the dust canister until it is totally dry.
Clean the Shark Rotator Vacuum Cleaner
The shark rotator vacuum filter system consists of one or two foam filters, one felt filter and one HEPA filter.
We will be looking at how to clean the different filters below.
How to Clean the Shark Rotator HEPA Filter
The Shark HEPA filter is positioned on the machine’s lower front, behind the filter door. Open the door and pull out the HEPA filter to remove it. Allow the filter to dry completely after carefully washing it in cold water.
Reassemble the shark rotator HEPA filter after it has dried completely.
How to Clean Shark Rotator Foam/Felt Filters
To clean the foam/felt filters, instead of using soap, simply rinse them in cold water, being mindful not to harm them.
After thorough washing and rinsing, the foam and felt filters might not return to their original white appearance.
However, it shouldn’t be a cause for concern in as much as the filters are in good working order. If the filters are already damaged, you may need to replace them.
According to the manufacturer’s recommendations for shark vacuum cleaners, the Foam/Felt filters should be cleaned once a month.
Clean the Shark Rotator Vacuum Cleaner’s Rotating Brush
To clean the shark rotator vacuum cleaner’s rotating brush, follow these steps.
- Separate the floor attachment from the handle to clean the revolving brush.
- Snip any dust or hair tangled in the brush with a pair of scissors or a seam ripper.
- Gently clean the bristles to avoid harming them.
- Then, using a toothbrush, brush the dust away.
Clean the Shark Rotator Vacuum Hose
Before cleaning the Shark rotator vacuum cleaner hose, make sure it is free of any electrical components. Reading the owner’s manual that came with the cleaner will confirm this.
If you’re certain the hose doesn’t include any electrical components, soak it in warm soapy water and scrub the ends with a soft bristle brush. Rinse and hang to dry vertically.
Reassemble the Shark Rotator Vacuum Cleaner
Ensure that the dust canister, filters, rotating brush, and hose you cleaned have dried completely before attempting to reassemble the Shark rotator vacuum cleaner.
To avoid the growth of mildews, which would damage the vacuum cleaner, each component must be thoroughly dried before reassembling.
In this article, we have looked at when you should clean shark rotator vacuum, and how to clean shark rotator vacuum.
Always remember to remove your shark rotator vacuum from the power outlet before attempting to disassemble or clean, as doing otherwise might prove to be quite hazardous.
Also, do not forget to allow the various components of the shark rotator vacuum cleaner to air dry for a minimum of 24 hours, before you reassemble the shark rotator vacuum cleaner.