How to Connect AirPods to Microsoft Surface

If you own AirPods, you may have observed that connecting them to a Macbook is much simpler than connecting them to a Windows PC. So, if you are looking for how to connect AirPods to Microsoft Surface which is a Windows PC, here is a guide for you.

This is independent of your Microsoft Surface OS; whether it’s using Windows 10 or Windows 11, you will be able to connect and use your AirPods with your new or old Microsoft surface computer.

However, you must ensure that your Microsoft Surface laptop’s Bluetooth is turned on and prepared to be paired with your AirPods before doing anything with the actual AirPods.

Once the Bluetooth is turned on [because the AirPods can only connect to your Microsoft Surface with the help of the PC Bluetooth function at the time of writing this article].

Recommended: How to make Windows look like Mac

Connect AirPods to Microsoft Surface

How to Connect AirPods to Microsoft Surface

Here is a thorough step on how to connect AirPods to Microsoft Surface. Follow the steps below:

  • On your Microsoft Surface Laptop, enable Bluetooth.
  • Tap the Start button, then type “Bluetooth” into the search box.
  • You will immediately get some results from your Windows search.
  • The “Bluetooth and other devices settings” link must be clicked.
  • Make sure your Bluetooth is turned on after the Bluetooth settings window has opened.
  • Turn on the Bluetooth switch by locating it and finding it.
  • You can get ready to pair your AirPods now that the Bluetooth connection on your Microsoft Surface laptop is active.
  • Activate your AirPods by opening them.
  • For 3–4 seconds, press and hold the pairing button before letting go.
  • As a sign that it can now be paired, the light will blink a couple of times.
  • Continue with the PC while leaving the AirPods open on the table.
  • Note that you will need to redo the first two steps if the AirPods close at this point.
  • There is only one more step left, which is to pair your AirPods with your Microsoft Surface laptop.
  • You will see a popup with three or more options after choosing the “Add Bluetooth or other devices” option in the Bluetooth settings.
  • To use Bluetooth, you must choose that option.
  • Your Surface computer will now begin hunting for your AirPods.
  • Once your AirPods name displays in that window, double-click on it.
  • If you followed the steps carefully from the beginning, then you should receive the following message: “Your device is ready to go.”

This is all about how to connect AirPods to Microsoft Surface.Connect AirPods to Microsoft Surface

Here’s how to connect AirPods to a Windows 11 Microsoft Surface.

  • On the taskbar, right-click the Windows icon.
  • Choose Settings.
  • Choose the Bluetooth and devices option.
  • If Bluetooth isn’t turned on already, turn it on.
  • Choose + Add device option.
  • Open the case after putting the AirPods inside.
  • Press and hold the AirPods case button.
  • Release the button once the light flashes white (The light may be inside your case or on the front of the case).
  • Choose Bluetooth on your Windows 11 computer.
  • Wait for your PC to start looking for devices, then select your AirPods from the list when they do.
  • Click on Done once you have waited for the connection to be established.Connect AirPods to Microsoft Surface

How to Disconnect AirPods from Microsoft Surface

You can disconnect your AirPods from your Microsoft Surface notebook in one of two ways:

  • Turn off Bluetooth by going to the Bluetooth settings on your computer.
  • On the rear of the AirPods case, press and hold the Pair button.

Although they also function flawlessly on other laptops and desktop computers like the Microsoft Surface, AirPods perform especially well with Apple products like the Macbook.

The key distinction is that, when compared to a MacBook, there are a few extra steps you need to take to pair them with your Microsoft Surface notebook.

Why won’t my AirPods Connect to My Surface Pro? 

Your AirPods may not be properly connected to your Microsoft Surface or other Surface devices such as Surface Pro for several reasons. They include:

  • Your Microsoft Surface doesn’t have Bluetooth enabled: Through the Windows 10 Action Center, reactivate Bluetooth.
  • The AirPods were connected to something else: When activated, Apple AirPods frequently remain connected to the first synced device they find. To disconnect them, either take them out of the other device or deactivate Bluetooth on that device.
  • Your Surface was linked to another device: Audio may already be streamed from your Surface Pro to a speaker or a set of headphones. Turn off or unplug that other device.
  • Perhaps the batteries are dead: To ensure that your AirPods have a long battery life, charge them every day. Also, make sure you put them back in their case after usage to prevent inadvertent activation and exhaust power consumption when not in use.
  • Your AirPods are invisible to your Microsoft Surface: Put your AirPods in their charging case, snap the lid shut, and then open it again to correct this.
  • Windows 10 has bugs: To troubleshoot Windows Bluetooth, restart your Surface.
  • Your AirPods may be fake: If you purchased your AirPods from an Apple Store, the possibility of this happening is low, but if you purchased them from a reseller, your AirPods may be fake or damaged.Connect AirPods to Microsoft Surface

Can’t Connect AirPods to Microsoft Surface? Try these Fixes!

We are sorry to hear that you are having trouble pairing your AirPods to your Microsoft Surface, and we appreciate you taking the time to let us know about this. You can try the following fixes below to connect AirPods to Microsoft Surface:

  • Make sure your AirPods are in pairing mode before doing anything else.
  • Simply remove the AirPods from the case when opening it.
  • The light between the AirPods in the case will be white and blinking when you are pairing or connecting for the first time.
  • Don’t click the button on the back of the case; you don’t need to do anything else to it.
  • When you open the case and, for some reason, the case light is orange or green, press the button on the back of the case until it turns white, and then release it.
  • Click to add the AirPods in Bluetooth settings.
  • Click the list when you see the AirPods there and wait until it says they are paired and connected.
  • Avoid clicking the connect box.
  • Put the AirPods in your ears once it says they are paired and connected.
  • Simply select disconnect in the Bluetooth settings once you are done using the AirPods.
  • Keep the AirPods in their case for the next time you want to connect.
  • Verify that the green light is on by opening the case.
  • Click Connect in the Bluetooth AirPods settings while keeping the case open and the AirPods inside.
  • Wait till it indicates that it is connected.
  • After that, insert your AirPods.

This worked for some users and they claimed their AirPods sound amazing while listening to Spotify on their Microsoft Surface and also an optimal performance when they used Zoom for voice communication.

  • Connect AirPods to Microsoft Surface

It is strongly advised that you verify that your AirPods are authentic, as fake models are frequently overlooked by computers.

Additionally, ensure that your AirPods are fully charged, and once they are Bluetooth-connected to your laptop, try to position yourself as close to it as you can. An audio shutter and generally low quality can be caused by a faulty connection.

Leave a Comment