If you are searching for how to connect jaybird headphones to play your favourite music on your device then you are at the right place.
Your Jaybird headphones come ready to pair and you shouldn’t encounter any problem pairing your headset to your phone or any other Bluetooth device.
We’ve compiled this article to guide you on how to connect jaybird headphones to your Bluetooth devices.
How To Connect Jaybird Headphones
Follow the steps below to connect your Jaybird headphones.
- Begin with both earbuds in the charging case with the lid closed.
- Open and remove the right earbud from the charging case.
- Close the charging case and press the multifunction button on your right earbud to turn it off.
- To put your earbud in pairing mode: Press and hold the right multifunction button for 6 seconds. Release the button when you see a flashing green LED. When the LED flashes green, the earbud is in pairing mode.
- You will hear a voice prompt that says “Go to Bluetooth settings and select Jaybird RUN”.
- Now on your phone, turn on Bluetooth settings
- Select “Jaybird RUN” in the list of discovered Bluetooth devices.
How To Connect Jaybird Headphones To iPhone
Below is how to connect your Jaybird headphones to your iPhone:
- Hold the middle button to turn on your jaybird headphone. Release the button when the LED blinks green or red and hear the “Ready to pair” voice prompt.
- Turn the Bluetooth on your device. Go to the Bluetooth settings, and find the Jaybird headphone on the available list of devices.
- Select your Jaybird headphone on the list. Once your devices are now connected, the red or green LED will turn off and you will hear a voice prompt that says “Connected”.
How To Connect Jaybird Earbuds To Laptop
Follow the steps below to connect your Jaybird earbuds to your Mac:
- Please turn on your earbuds and put them in pairing mode.
- Select System Preferences from the Mac menu.
- Open the Sound preference pane.
- Select the Output tab.
- Choose your Jaybird earbuds.
To connect your Jaybird earbuds to your PC; follow the steps below
- Please turn on your earbuds and put them in pairing mode.
- Open your Control Panel.
- Click Hardware and Sound.
- Click Manage audio devices (under Sound).
- Choose your Jaybird earbuds and click Set Default.
- Tap OK.
How To Pair Jaybird X4
Below are steps to follow to pair your Jaybird X4 buds:
- Press the middle button to turn on your X4 earbuds until the LED blinks red or green and you will hear the “Ready to pair” voice prompt.
- Turn on the Bluetooth of your phone. Now go to the Bluetooth setup menu, and look for ‘Jaybird X4’ on the available list of Bluetooth devices.
- Select ‘Jaybird X4’ on the Bluetooth list. The red or green LED will turn off once connected and you will hear the “Connected” voice prompt.
How To Connect Jaybird X3
Here is how to connect your Jaybird X3 to a Bluetooth device:
- Turn on your Jaybird X3 by pressing and holding the Power Button until a flashing red or green light is displayed. You will then hear a voice prompt that says: “Searching for your music device.
- On your phone, turn on Bluetooth and ensure it is actively searching for a nearby Bluetooth device.
- Choose “Jaybird X3” from the list of available Bluetooth devices.
- Your Jaybird X3 will be prompted to say: “Headphones connected”.
How To Connect Jaybird Vista
If you are trying to connect your Jaybird Vista to your phone or audio device follow the steps provided below:
- Place both earbuds into the charging case and close the lid.
- Open the charging case, then press and hold the button on the charging case until the case light begins to blink white.
- On your Bluetooth device, make sure Bluetooth is enabled.
- Go to Bluetooth settings, and select ‘Jaybird Vista’ in the list of discovered Bluetooth devices. The white light on the charging case will turn off once the Jaybird Vista is connected to your Bluetooth device.
How Do I Pair Jaybird Headphones?
To pair the Jaybird headphones, ensure your earbuds are turned off. Then press and hold the right multifunction button for about 6 seconds until the LED flashes green. The LED flashing green indicates that the earbud is in pairing mode. On your device “Go to Bluetooth settings and select the model of your Jaybird headphones.
How Do I Connect My Jaybird Earbuds To My iPhone?
Kindly follow the steps below to connect your Jaybirds earbuds to your iPhone.
- Press the right button for 3 seconds to turn off your earbuds.
- With your earbuds now turned off, press the right button for 6 seconds to enter pairing mode.
- Go to the Bluetooth settings on your iPhone and select your Jaybird earbud from the list of available devices.
How Do I Put My Jaybird Vista in Pairing Mode?
Follow the steps below to put your Jaybird vista in pairing mode.
- Open the charging case of your Jaybird Vista.
- Now press and hold the case button until the case LED starts blinking white.
- On your device, go to Bluetooth settings then turn on Bluetooth.
- In the list of available devices choose ‘Jaybird Vista’. The white case LED will turn off once your devices are connected.
Why Are My Jaybirds Not Connecting?
Checkout the following troubleshooting tips if your earbuds are not connecting to your devices.
- Turn your audio device Bluetooth off for at least 10 seconds and then back on again.
- Go to your device’s Bluetooth settings and forget or remove your Jaybird earbuds. Then try to pair your devices again.
- Connect the charging clip and USB cable to a power source to turn off your buds and perform a soft reset.
- To factory reset your earbuds, first put your buds in pairing mode by turning your earbuds off. Now press and hold the centre button for more than 4 sec until you see an alternating red or green LED.
2. While the LED is flashing red/green double-tap the centre button. Upon successful factory reset, the LED turns orange and your buds turn off.