There are a series of issues that jaybird vista users experience. For some, it might be a pairing issue while you might struggle to connect your jaybird vista earbuds to their Bluetooth devices.
If you are stuck looking for how to connect jaybird vista earbuds to your smartphone to a Bluetooth device, I will be walking you through the steps you should follow to connect it.
Also, I will be breaking down proven troubleshooting steps you should take if you’ve tried connecting your jaybird vista earbuds to a Bluetooth-enabled device but it is not connecting
Recommended: Best Cheapest Earbuds
How to connect Jaybird Vista
Your Jaybird Vista earphones have a few features that you should be aware of. To begin, when you remove it from the charging case, it is ready to pair.
Secondly, your Jaybird vista earbuds can also pair with up to eight devices max.
Thirdly, after the first pairing, you must manually pair it to another device by activating the pairing mode on your headphones.
Now that you are aware of all these, let’s look at how to connect jaybird vista earbuds.
- Put the earbuds into the charging case
- Close the lid.
- Next, open the charging case while holding down the case button till the case LED starts blinking white.
- After doing that, launch your smartphone and navigate to Bluetooth.
- Go to Bluetooth settings and enable Bluetooth.
- Once it is enabled, search for available Bluetooth devices and Select ‘Jaybird Vista’ in the list of discovered devices.
- Once it connects, the white light showing on the case should go off
How to connect jaybird vista 2
When compared to previous Jaybird earbuds, the vista 2 has a larger housing and battery capacity.
But then the steps involved to connect it don’t differ much from earlier jaybird vista earbuds.
That said, here is how to connect jaybird vista 2
- Put the earbuds into the charging case
- Close the lid.
- Next, open the charging case while holding down the case button till the case LED starts blinking white.
- After doing that, launch your smartphone and navigate to Bluetooth.
- Go to Bluetooth settings and enable Bluetooth.
- Once it is enabled, search for available Bluetooth devices and Select ‘Jaybird Vista’ in the list of discovered devices.
- Once it connects, the white light showing on the case should go off.
How to connect jaybird vista 2 to a laptop
Recommended: How to connect Airpods to HP laptop
If you have a Laptop that uses windows or Linux, the method highlighted below will work with your jaybird vista 1 or jaybird vista 2 earbuds.
- Put the earbuds into the charging case
- Close the lid.
- Next, Open the charging case while holding down the earbuds case button till the case LED starts blinking white.
- On your Laptop, click on the search bar and type “Bluetooth”
- Click on it and locate and click on “add device“
- While it searches for any available device, wait till you see “jaybird Vista”.
- Once it is enabled, search for available Bluetooth devices and Select ‘Jaybird Vista’ in the list of discovered devices.
- Immediately after it is connected, the white case LED will turn off.
How to connect jaybird vista 2 to MacBook
Unlike the Apple Airpod, The earbuds aren’t owned by Apple, however, it doesn’t stop it from connecting to Apple devices such as an iPhone or Macbook.
If you own a Macbook, here is how to connect jaybird vista earbuds to Macbook.
- Place the earbuds into the charging case and close the lid.
- Next, lift the charging case and hold down the case button until the case LED starts blinking white.
- On your Mac, choose the Apple menu
- Now, locate and click on System Preferences
- Next, click Bluetooth
- Now, choose the Jaybird Vista 2 earbuds in the Devices list.
- Once both of them are paired the white case LED will turn off
How to connect jaybird vista without case
Recomemded: How to charge Airpods without a case
This should not be confused with pairing as you cannot pair your jaybird vista earbuds to another bluetooth device without the case. However, you can connect your Jaybird Vista earbuds with a Bluetooth-enabled device that has been initially paired with it.
If you are unsure of how to do that, you have to connect it directly by selecting the jaybird earbuds after turning it on. and that’s all.
How to connect jaybird vista to iPhone
Connecting your jaybird vista earbuds to your Apple iPhone is pretty straightforward. Here are the steps you should follow
- Place the earbuds into the charging case
- Close the lid.
- Open the charging case.
- Hold down the case button til the case LED starts blinking white.
- After doing that, Launch your iPhone and locate your Bluetooth.
- Now, go to settings, locate Bluetooth settings and ensure Bluetooth is enabled.
- Once it is enabled, search for the Available Bluetooth device
- Now, select ‘Jaybird Vista’ in the list of discovered devices.
- Immediately after it is connected, the white case LED will turn off.
How do I reset my Jaybird Vista?
To reset your jaybird vista earbuds follow the steps below
- Insert the earbuds into the charging case
- Close the lid.
- Open the case and press the yellow button in the middle until a white light starts to blink.
- After doing that, push this same button twice until you see a pink light blinking.
- Finally, close the case and open it.
Jaybird vista not connecting
Recomended: Can you Wear Airpods in the shower
Several Jaybird Vista owners have complained online about their earphones failing to pair after a few weeks of use. For some, it could occur after purchase.
If you are experiencing a similar issue. You may test where the problem is by doing the following.
- Taking both earbuds out of the case.
- Insert them one by one, beginning with the right earbud.
- Is the LED on the case blinking twice while you insert it?
- Try again with the left earbuds to see if it does the same thing.
If one of them does not blink twice, the problem is originating from there, and since you are aware of this, I will break down the processes required to troubleshoot it all by yourself.
Ensure the battery are not low
Several methods are available for determining whether or not your Jaybird Vista earphones are low on power. However, to be certain try out these steps
- Check the battery % on your smartphone.
- Insert it for 5 minutes
- After that, connect the Jaybird Vista earphones.
If it does not pair, proceed to the next troubleshooting step.
Ensure the connection points are clean
Each earbud is protected by an ear gel. If you try inserting both earphones into the casing one at a time and the LED on the case does not flash twice, it suggests there is a problem with one of the earbuds.
That being said, here are the steps you should follow to clean the connection points
- Remove the ear gel from the earphones.
- Now wipe the interior of the earphones’ case and the connection points.
- Try placing the earphones again after removing the ear gel.
- Retry pairing it.
Try the next troubleshooting step if it doesn’t pair.
Lookout for interference
When pairing your Jaybird vista earphones with your Bluetooth device, there may occasionally be interference from other devices in the area.
You should switch off as many wifi devices nearby to be extra certain about this.
Additionally, avoid placing the earphones too close to appliances like refrigerators that emit radio waves.
Turn the Earbuds ON and OFF
Sometimes the firmware might not function as it is supposed to due to some bugs or firmware-related issues.
While these might not be easy to spot. What you can do to tackle these is by turning your Jaybird vista earbuds Off wait for a few minutes and turning it back on.
Doing this usually resolves most pairing issues if you are faced with one.
If these don’t solve it, try the next troubleshooting steps below
Carry out a Hard reset
Turning off and turning on your jaybird vista earbuds is not synonymous with performing a hard rest. The process differs from each other
Here is how to do that
- Insert the earbuds into the charging case
- Close the lid.
- Open the case and press the yellow button in the middle until a white light starts to blink.
- After doing that, push this same button twice until you see a pink light blinking.
- Finally, close the case and open it.
After doing all that, your jaybird vista earbuds would have been reset
Jaybird Customer support
This only happens sometimes if your Jaybird Vista earbuds have developed some technical issues, but if you’ve followed all the instructions above and nothing has improved, you should get in touch with Jaybird customer service.
Conclusion
Figuring out how to connect Jaybird vista Earbuds to your smartphone or a Bluetooth-enabled device isn’t much of an issue till you start struggling with it.
But with all the points listed above, you should be able to resolve it. if you have, feel free to comment below on which of the troubleshooting tips worked for you.