What is Samsung TV green tint and how can you fix that? This article will revolve around fixing a green tint on your Samsung TV. It can be very annoying when your Samsung suddenly goes all green screen while enjoying your favourite show or movie on your couch.
Anyway, you don’t have to get yourself all worked up as this article will be providing you with all the necessary information you need to fix your Samsung TV green tint all by yourself.
Although Samsung is a well-known brand all over the world, at times its electronics and gadgets may malfunction due to some known and unknown reasons.
Once you can understand why your Samsung TV shows the green screen, then you are on your way to fixing the error right away.
Whether you are a professional or a novice; this article will guide you through how to resolve your Samsung green screen tint inssue.
What does it mean when your TV Screen turns Green?
In case you are wondering what could be the meaning of having a green TV screen suddenly, then you are in the right place. When your Samsung TV displays a green tint; it simply means that your TV is not receiving a video feed, especially when the entire screen is green.
You may also experience the green tint if there is an over-saturation of green. This usually occurs when the pictures on the screen have a green hue.
Causes of Samsung TV Green Tint
Before we proceed with how to fix the Samsung TV green tint issue, you should know the most common reasons behind this frustrating problem. Some of the causes of this issue have been highlighted below:
Faulty TV hardware
You must check your Samsung TV hardware as this may cause the green tint you are seeing on your smart TV.
Faulty Cable connections / Loose Connections
Faulty sockets and jacks or loose connections may obstruct the transmission of some colour signals. Therefore, once you see a green screen, it may imply that only the colour information relating to the green parts of your images makes it to the screen.
Wrong Picture Settings
Most smart TV separate colour information into green, blue, and red. Although, you can adjust the intensity of these colours. If you set green too high or the other two colours too low, you may end up with an extremely green picture.
Samsung TV may be faulty
Most hardware issues usually trigger Samsung TV green-screen errors. Therefore, if you are sure that the colour settings are correctly regulated and the connections are also fine, then a serious TV fault may have caused the green tint on your TV. This is usually the case especially when the picture is entirely green.
However, if the only variation across the image is shade, there’s a high probability that some of the “guns” that beam electrons on the colour screen are faulty and need a replacement. They handle colours blue, green, and red. In case the guns that handle red and blue have malfunctioned, then it’s likely that the screen may be overly green.
Interfering Magnets placed around
Magnets that are placed near the screen can cause your Samsung TV to display this green tint.
Temporary Error or Glitch in the Samsung TV
Some malfunctions that appear temporarily on Samsung TV can lead to different errors such as the common green-screen error. Most times, software issues are responsible for this type of problem.
Recommended: How to adjust brightness on Samsung TV
How to Fix Samsung TV Green Tint
Here are some steps you should try if you want to fix Samsung TV green tint on your smart TV screen. Follow the steps below:
Check your connections
The first troubleshooting step to try is to check your connection whether your TV cables are damaged, loose, or twisted. After checking and you discover that they are, then you need to replace, tighten, or straighten them. However, if there are no visible issues, you can pull the cables out and connect them one after the other.
Power on and off your TV
This method is very fast and usually helps to fix small software glitches that may cause your TV screen to go green. All you need to do is simply turn off the TV, disconnect it from the power source, and then connect it back in.
Cold Boot your Samsung TV
If powering on and off your TV did not fix the problem, then you can move to the next step by holding down the power button on the Samsung TV remote till the TV turns off and on again. This requires about 5 seconds or so.
Power Cycle your Samsung Smart TV
A temporary software glitch can cause the green screen issue on your Samsung TV. This may occur due to the TV’s internal memory being overloaded or the TV’s software firmware may have crashed. Power cycling forces your smart TV to reset and refresh its software
To power cycle your Samsung TV, follow the steps below:
- Turn off the power source.
- Disconnect your smart TV from the power source.
- Then, wait for about 10 to 15 minutes.
- Connect the TV power cable back into the power outlet.
- Turn the power on and switch on the TV.
Note that this method is very effective if temporary bugs or faults are responsible for the green tint error.
Update your Samsung Smart TV
An outdated firmware may as well cause the green screen issue on your Samsung Smart TV. You can update the firmware on your Samsung TV and you should be able to fix the Samsung TV issue. This update can then be done from your Samsung TV settings. Note that the TV will only detect and download updates in case you are using a Wi-Fi connection.
- Go to your Samsung TV’s Settings and search for the Support option.
- Scroll down to the Software Update section. It’s available for use.
- Now, to check for updates on the TV, click on Update Now.
Adjust the Picture Settings
You can consult your owner manual for the exact step you should follow depending on your TV brand. However, if you have a Samsung TV, you can follow the steps below to adjust your picture settings:
Disable the HDR+ Mode
To disable the HDR+ mode, follow the steps below:
- Click on the Menu button on your Samsung TV remote.
- Then, scroll down to the picture option and click on it.
- Proceed to Expert Settings.
- Finally, scroll down to turn the option that represents HDR+ mode off.
If these options are not your preference, you can disable RGB.
To adjust the Brightness, follow the steps below:
- Tap on the Menu button or any other that represents it.
- Navigate to the Picture option and then proceed to Expert.
- Scroll down to Brightness and try to change it to remove the green screen.
To Disable RGB, follow the steps below:
- Tap on the Menu button or any other that represents it.
- Navigate to the Picture option >> Expert.
- Scroll down to the HDR+ mode to fix it.
- Scroll down further and choose the RGB Mode Only.
- Turn it off.
Do a Factory Reset
This may be considered as the last resort before consulting the manufacturer of the TV. This method has recorded about 90% success in fixing software-related problems. To factory reset your Samsung smart TV, follow the steps below:
- On your remote control, tap on Settings and then scroll to General.
- Scroll to the Reset option and tap on it.
- Enter the PIN once prompted.
- Tap on the Reset option.
- Finally, wait for some minutes to allow the reset process to finish.
This should help you fix Samsung TV’s green tint problem finally!
Request for Manufacturer’s Assistance
After trying all of the above-mentioned troubleshooting steps and the green tint on your Samsung TV won’t still go away, then you may consider contacting Samsung customer service because it may be a result of a faulty TV.
In addition, your Samsung TV may be having a serious hardware issue. Go ahead to contact the manufacturer to repair it or get a replacement once and for all.
Now you should be able to fix Samsung TV green tint by following the tips aforementioned, and you will be able to fix the error without spending much time or other useful resources. In case you have any questions on the same topic, feel free to drop your comments in the section below.