Did your Samsung TV remote suddenly stop working? Or have been looking for ways you can fix your Samsung TV remote not working? Then read this article to learn the possible reasons why your remote might not work and how to fix it.
The Samsung TV offers excellent picture quality, display, and reliability, and to switch between the different channels available for your entertainment on the TV. However, if you prefer to control your Samsung smart TV or non-smart from a distance you would need the remote control to do the job for you.
The Samsung TV remote is known to work well most of the time, but sometimes some minor issues might prevent it from working effectively.
The remaining section of this article will explain the commonly known reasons for the Samsung TV not working and how to resolve it.
Why is the Samsung TV Remote Not Working
The Samsung TV remote, which is used to navigate through the Samsung TV easily, might sometimes stop working, which can be pretty frustrating for the user. However, you can easily troubleshoot this remote not working problem if you know where the problem is coming from.
Some of the common reasons for the Samsung TV remote not working are:
- The batteries in the remote are no longer working.
- The remote control pad is defective, causing it to malfunction.
- The remote control sensor in the TV is malfunctioning.
- There is an electronic glitch in the remote control.
The article’s next section will explain the solution to the Samsung TV remote control not working issue.
You can also check out How to Use Samsung TV Remote Codes with Universal Remote.
How to Fix the Samsung TV Remote Control not Working
Some of the common reasons why the Samsung TV remote control is not working have been listed above, and this section of the article will explain how to resolve it.
Check & Change the Batteries if Bad
The Samsung remote is battery operated, so if the battery is not placed correctly or is no longer working, the remote will not work.
Press the power button on the remote while pointing it to your TV. If the LED indicator on the TV does not blink, it implies that the battery no longer has enough power to power the remote.
Then follow the instructions below to change the batteries.
- Carefully open the battery compartment.
- Then check if the battery was placed correctly, as incorrect placement can prevent the remote from working.
- If the batteries were placed correctly, it means that the batteries are old; you should then replace them with new ones.
- Then close the battery compartment.
You can then use the remote to confirm that you have resolved the Samsung TV remote not working issue.
Confirm that the Remote is Paired
If you use a Samsung smart TV, then your remote is a smart remote control that needs to be paired before it works with the TV.
Follow the instructions below to pair your smart remote control.
- Turn on your Samsung TV using its power button.
- Then point your remote at the TV’s remote sensor.
- Now press the remote’s Return and Play/Pause button for about 3 seconds.
- Then release your hold on the buttons when the pairing complete message appears on your TV screen.
It would be best if you then used the remote to control the TV so you can confirm that you have resolved the Samsung TV remote not working issue.
Confirm that there is no Interference between the Remote and the TV
Check that you do not have any electrical devices such as radios and mobile devices between your remote and TV because they might emit signals that will interfere with the remote, causing it not to work with the TV.
Remove any device that you suspect might be causing interference between the remote and the TV.
Resolve Electronic Glitch in Remote
An electronic glitch or bug in the remote can prevent the remote from functioning optimally with the remote.
Follow the instructions below to resolve the electronic glitch.
- Open the battery compartment at the back of the remote and remove the batteries.
- Then press and hold any button on the remote for approximately 20 seconds.
- Then release the buttons and ensure you reinstall the batteries properly.
If you have followed the instructions above, then you have been able to resolve the electronic glitch and, subsequently, the Samsung TV remote not working issue.
Check that the Remote is not Defective
If the remote is defective, it will not work with the TV, and you will need to get a replacement.
There are two different methods you can use to check if the remote is defective, and both methods are listed below.
The Digital Camera Test
If you own a camera phone or any other camera device, then you can confirm the state of the remote by following the instructions below.
- Switch on the camera.
- Then position the remote on the camera lens from about 6 – 10 inches.
- Then press any button on the remote, and you should see the infrared light of the remote flashing on the LCD screen of the camera.
If the infrared light of the remote does not come up, it implies that the remote is no longer functioning and needs to be replaced.
Use another Remote with the TV
On the same TV, the remote is not working; look for another compatible remote and follow the instructions below to test it.
- Put the other remote in TV mode.
- Then press the power button on the remote to switch on the TV.
If the second remote turns on the TV, it implies that the original remote is defective and needs to be replaced.
After replacing the remote, you should use the new one to control the TV to ensure that you have resolved the Samsung TV remote not working issue.
Samsung Remote Not Working but Blinking Red Light
If your Samsung remote is not working but blinking red light, it can either be because of interference or a glitch in the remote.
In cases of interference, you might need to reduce the distance from where you are pressing the remote to where the TV is situated. Also, having an electrical device like a phone or radio set between the TV and remote can emit signals that might interfere with the remote signal causing it not to work.
If it is an electronic glitch on the remote, the following instructions will help resolve it.
- Open the battery compartment on the remote and take out the batteries.
- Then press any button on the remote for about 20 seconds.
- Then release the button and put the batteries back in the remote.
Following the instructions above should help resolve the electronic glitch in the remote.
Samsung TV Remote not Working no Red Light.
If you have already tested the Samsung TV remote and seen the infrared light, a.k.a red light is not showing. Then it means that the remote is already defective and needs a replacement.
How to Pair Samsung Remote to TV
If you use a smart Samsung TV, then it’s smart remote needs to be paired with the TV before it can control the TV.
Follow the steps highlighted below to pair the Samsung remote to the TV.
- Switch on the Samsung TV using its power button.
- Then locate the TV remote sensor and point the remote at it.
- Then press and hold the remote’s Return and Play/Pause button for approximately 3 seconds.
- Then release your hold on the buttons immediately after the pairing complete message appears on your TV screen.
Once you have followed the instructions given above, you can begin to navigate through your TV using the remote.
Conclusion:
This article has discussed the common reasons that might be the cause of the Samsung TV remote not working issue and different troubleshooting methods you can use to resolve it.