Did you recently acquire Aftershokz Aeropex headphones, and are you wondering how to pair Aftershokz Aeropex? Then read through this article, as we would be discussing how to pair Aftershokz Aeropex.
The Aftershokz Aeropex is a special type of headphone that is slightly different from traditional headphones because it uses a bone conducting technology with an open ear design to transmit sounds.
The bone conducting technology the Aftershokz Aeropex headphone uses allows it to transmit sounds from your cheekbones to your inner ears.
The open ear design also gives the Aftershokz Aeropex an edge over traditional headphones. Its open ear design makes it more safer for long-term use and allows you to be more conscious of your environment and the people around you, plus it is easier to clean.
Read Also: All you need to know about Aftershokz
The Aftershokz Aeropex is also a certified sports headphone that can withstand sweat, dust, and moisture during prolonged periods of both indoor and outdoor activities.
Now, let’s look at how to pair Aftershokz Aeropex.
How to Pair Aftershokz Aeropex
You can easily pair your Aftershokz Aeropex with your device by following the steps below:
- Turn off your Aftershokz Aeropex headphone.
- Press and hold the volume + button for approximately 5 – 7 seconds or until you hear the welcome to Aftershokz message from the headphone, signifying the headphone has entered pairing mode.
- Now go to your device’s Bluetooth settings, and from the list of available devices, click on Aeropex to pair it with your device.
- You will hear a connected message from your headphones.
If you can hear the message, it means you have been able to pair Aftersokz Aeropex headphones successfully.
How to Reset Aftershokz Aeropex Headphones
You might encounter cases where you are unable to pair Aftershokz Aeropex headphones, or you might be having issues with using the headphones.
When this occurs, the troubleshooting method to attempt is to reset Aftershokz Aeropex headphones.
Follow the steps below to reset your Aftershokz Aeropex headphone.
- Press and hold the volume + button till the LED light flashes red and blue, and you hear a welcome to Aftershokz message signifying it is ready for pairing.
- Now press and hold the buttons on your Aftershokz Aeropex, namely the multifunction button, the volume + button, and the volume – button simultaneously for approximately 5 seconds, or till you hear a beep and feel vibrations.
- Then turn off your Aftershokz Aeropex.
After resetting your Aftershokz Aeropex headphones, you can attempt to pair and use the headphones to confirm the issue has been resolved.
How to Pair Aftershokz to Smart TV
If you curious about how to pair Aftershokz to smart TV? Then read this section of the article as we will be addressing that.
You can easily pair your Aftershokz headphones to your TV either through your TV Bluetooth system or by using a Bluetooth transmitter.
Follow the steps below to pair Aftershokz to TV.
- Ensure your Aftershokz headphone is turned off.
- Enter pairing mode by pressing the volume + button on your headphones for about 5 seconds, or till the LED light flashes red and blue and you hear a welcome to Aftershokz message.
- Then go to your TV Bluetooth settings and select the Aftershokz headphones to activate paring.
Once you hear a connected message from your headphones, it means you have been able to pair Aftershokz to TV successfully.
How to Pair Aftershokz to iPhone
The steps outlined below will guide you on how to pair Aftershokz to iPhone.
- Ensure that your Aftershokz headphone is turned off.
- Then press the volume + button for about 7 seconds, or till you hear welcome to Aftershokz, implying your headphone has entered pairing mode.
- Then on your iPhone, go to the settings menu and click on Bluetooth settings.
- From the list of available devices, click on your Aftershokz Aeropex to pair it.
Hearing a connected message from your Aftershokz headphones implies you have successfully paired Aftershokz to your iPhone.
How to Connect Aftershokz to iPad
The steps written below will help you connect Aftershokz to iPad
- Ensure that your Aftershokz headphone is turned off.
- Press and hold the volume + button on your Aftershokz to enter pairing mode.
- Turn on your iPad and navigate to the settings menu.
- From the settings, go to Bluetooth settings.
- Then from the list of available devices, select your Aftershokz headphones to pair.
- You will then hear a connected message from your headphones.
The connected message signifies that you have successfully connected your Aftershokz headphone to your iPad.
Aftershokz Aeropex Not Turning on?
If you are having issues with your Aftershokz Aeropex not turning on, and you can confirm you have been pressing the volume + button for a couple of seconds without any response.
Kindly contact the Aftershokz customer happiness team for further assistance.
Conclusion
This article has guided you on how to pair Aftershokz Aeropex headphones, connect Aftershokz headphones to your iPhone and iPad, how to reset your Aftershokz Aeropex, and the next step to take if your Aftershokz Aeropex is not turning on.
You can also check out How to Connect Aftershokz to Windows.