You own a pair of indy Evo earbuds and have been looking for how you can pair Indy Evo earbuds, so you can begin to use them with your devices. If that is the case, you are reading the right article as we will explain the steps required to pair Indy Evo earbuds in this article.
The Indy Evo is a model of the Skullcandy earbuds that have recently gained so much popularity due to their long battery life, excellent sound quality, sweat and waterproof resistant feature, and sleek design.
The Indy Evo is an excellent pair of earbuds to own, but it will be of no use to you if you cannot pair it with your devices, which is why the remaining section of this article will explain how you can pair Indy Evo earbuds to your devices.
How to Pair Indy Evo Earbuds
The Indy Evo earbuds are an excellent pair that aid your flexibility by making it easier to move around and eliminating the stress of using wired headphones.
They also make it easy to control your music and incoming and outgoing calls using just the earbuds and are designed for your comfort so you can conveniently use them for an extended period.
However, since the earbuds need to be paired before they begin to function, you can pair Indy Evo earbuds by following the instructions below.
- Put your Indy Evo earbuds inside their charging case and close the lid.
- Then remove the earbuds from the charging case once a solid red light appears on them, signifying that they are now in pairing mode.
- Then go to your device and turn on Bluetooth.
- Then select Indy Evo from the list of available Bluetooth devices that will show on your screen.
If you have followed the instructions above, you have then been able to pair Indy Evo earbuds and can begin to use them as you desire.
You can also learn about How to Charge SkullCandy Earbuds.
How to Pair Skullcandy Indy Evo Together
The Skullcandy Indy Evo is a truly wireless device that can be used in either mono or solo mode.
To use the earbuds in solo mode, both of the earbuds have to be paired together, and you can pair both pairs of the Skullcandy Indy Evo by following the instructions below.
- Place both earbuds in the charging case, and wait until a red light appears on them.
- Then remove the earbuds from the case, and they will automatically turn on.
- The LED on the earbuds will automatically flash blue to signify that they are syncing.
- Once the sync is successful, you will hear a prompt, and only the left earbud’s LED will begin to flash red/blue.
Once you have paired both earbuds together, you can then pair Indy Evo earbuds with your device.
How to Pair Skullcandy Earbuds to Android
The Skullcandy earbuds are an excellent device to own, as they make it quite easy to enjoy excellent audio quality with the flexibility that is not possible with wired headphones.
You can pair Skullcandy earbuds to your android device by following the instructions below.
- Put the earbuds in the charging case and remove them when their LED turns red.
- Then go to your android device settings and enable Bluetooth.
- Then select your Skullcandy earbuds from the list of available Bluetooth devices, and click on OK to pair.
The way you pair any Skullcandy earbuds to android is the same way you pair Indy Evo earbuds to android.
Once you have successfully paired your earbuds, you can begin you use them as you deem fit.
How to Pair Indy Evo Skullcandy Earbuds to iPhone
The iPhone allows for other earbuds apart from the Airpods, and the Indy Evo earbuds are an excellent alternative to the Airpods for use with the iPhone.
You can pair Indy Evo Skullcandy earbuds with your iPhone by following the instructions below.
- Place the Indy Evo earbuds in the charging case till the LED turns red.
- Then remove the earbuds from the charging case, and enable Bluetooth on your iPhone.
- Then, select the Indy Evo earbuds and pair them from the list of available Bluetooth devices.
Once you have followed the instructions above, you should have been able to pair Indy Evo to your iPhone successfully and can start using it to listen to music and receive phone calls.
How to Reset Skullcandy Wireless Earbuds
When you have issues with your Skullcandy wireless earbuds, probably issues with pairing or any other primary issue, you can always reset it to resolve the issue.
You can reset your Skullcandy wireless earbuds by following the instructions below.
- Unpair the Skullcandy wireless earbuds from any device, it is currently paired with.
- Then press and hold the volume + button and the power button simultaneously for approximately 5 seconds.
Once 5 seconds have elapsed, you can release your hold on the button, and your earbuds should have reset themselves.
You can then attempt to pair the earbuds with another device to confirm that it is now working as expected.
How to Reset Indy Evo Skullcandy Wireless Earbuds
If you have been unable to pair Indy Evo Skullcandy wireless earbuds with your device of choice, this might be due to a glitch that can quickly be resolved by resetting the earbuds.
You can reset the Indy Evo Skullcandy wireless earbuds by following the steps highlighted below.
- Ensure that you have unpaired the earbuds from any device it has been previously connected with.
- Then simultaneously press the volume + and power buttons for about 5 seconds.
Once you have done this, you have been able to reset the device. You can then proceed to pair both earbuds together by following the instruction below.
- Put both earbuds in the charging case, and wait till the LED turns red.
- Then remove the earbuds from the case, and they will automatically power on.
- Then the LED on the earbuds will begin flashing a blue color to signify that the earbuds are syncing.
- Once the sync is successful, you will hear a prompt, and only the left earbud’s LED will begin to flash red/blue.
Once you have done this, you can pair Indy Evo earbuds with any device of your choice and then start using the earbuds as you deem fit.
How to Resolve Skullcandy Indy not Pairing Together
If your Skullcandy Indy earbuds have issues syncing with each other, you can easily resolve this by following the instructions below.
- Unpair the earbuds from any device you have previously paired them with.
- Then put the earbuds in the case, and once the LED light turns on, remove only the right earbud from the case.
- Then click the center of the earbuds 4 times to turn it off and reset it.
- If the reset is successful, the light on the earbud will turn red; if it does not, you have to tap the center of the earbuds until it does.
- Then put the right earbuds back in the case.
- Remove the left earbud from the case, and tap it center 4 times or till the light on the earbud turns red.
- Then put the left earbud back in its case.
- Then place both earbuds in the charging case, and wait until a red light appears on them.
- Then remove the earbuds from the case, and they will turn on automatically.
- The LED on the earbuds will then automatically flash blue to signify that they are syncing.
- Once the sync is successful, you will hear a prompt, and only the left earbud’s LED will begin to flash red/blue.
Once you have followed these instructions, you can attempt to pair Indy Evo earbuds to confirm that it is now working as expected.
Conclusion:
This article has discussed how to pair Indy Evo earbuds to devices. We also looked at how you can reset the Indy Evo earbuds when experiencing issues with them.