You recently acquired Tozo T6 earbuds, and since it needs to be paired with a device, you are looking for the steps required to pair Tozo T6. Well, you are reading the right article, as we will be discussing how to pair Tozo T6.
Tozo T6 is one of the models in the Tozo earbud range that is fast gaining acceptance from many earbud users.
The Tozo T6 earbuds are an excellent pair of earbuds to own, as they give you great value for your money by providing good audio quality with a design that makes it comfortable and convenient for use for an extended period.
You can pair the Tozo T6 earbuds to almost any Bluetooth-enabled mobile device and computer, and the remaining section of this article will explain how you can achieve this.
How to Pair Tozo T6 Earbuds
The Tozo T6 earbuds are water-proof, which makes them quite resistant to sweat and water.
You can pair Tozo T6 earbuds with any device of your choice by following the instructions below.
- Remove the earbuds from the charging case; they will automatically turn on and connect in approximately 10 seconds.
- Once the earbuds begin to flash blue and red lights alternately, it implies that they are now in pairing mode.
- You can then turn on your device Bluetooth and select Tozo T6 from the list of available Bluetooth devices that will show on your screen.
After you have been able to pair Tozo T6 earbuds, you can begin to use them with the paired device as you deem fit.
You can also check out How to Connect JBL Headphones.
How to Put Tozo Earbuds in Pairing Mode
The Tozo earbuds need to be in pairing mode before they can pair with your device of choice.
If you are unsure of the steps necessary to put the earbuds in pairing mode, the steps below will help you achieve this.
- Remove the earbuds from the charging case and wait for them to turn on automatically.
- They will then connect within 10 seconds, and once they begin to flash red and blue light alternately, it means they are now in pairing mode.
Once the earbuds are in pairing mode, you can easily pair them with any Bluetooth device of your choice and start to enjoy the features of the earbuds.
Can Tozo T6 Pair Multiple Devices
The Tozo T6 earbuds are not designed to pair with multiple devices at the same time.
It is a Bluetooth device that does not support multi-sharing or NFC. You will have to always connect the earbuds to only one device at a time.
You can pair Tozo T6 earbuds to any single device of your choice by following the steps below.
- Take out the earbuds from the charging case, and wait for about 10 seconds for the earbuds to turn on and connect with each other.
- Once the earbuds begin to display red and blue lights alternately, it implies that they are ready for pairing.
- You can then go to the device you’d like them to be paired with and turn on the Bluetooth of the device.
- Then select and pair the Tozo T6 earbuds from the list of available Bluetooth devices shown on the screen.
How to Pair Tozo T6 to iPad
The Tozo T6 is compatible with the iPad and is an excellent addition to use with your iPad, as it can improve the audio quality of your iPad when connected to it.
You can pair Tozo T6 to an iPad by following the instructions below.
- Remove the earbuds from the charging case; they should automatically turn on and connect within 10 seconds.
- Then wait for the light on the earbud to start alternating between the red and blue color to put it in pairing mode.
- Then turn on Bluetooth on your iPad, select the Tozo T6 earbuds, and pair them from the list of Bluetooth devices.
Once you have done this, you can enjoy the flexibility of using the Tozo T6 earbuds.
How to Reset Tozo T6
The Tozo T6 earbuds are known to be durable and highly efficient, encountering little to no issues, but like every other device, it has a chance of developing basic faults that can thankfully be fixed a lot of times by resetting the earbuds.
You can reset the Tozo T6 earbuds by following the instructions below.
- Unpair the earbuds from your device and turn off Bluetooth on your device.
- Then remove the earbuds from the charging case and wait till they alternately begin to flash red and blue.
- Then tap the earbuds three times to turn off and then reset them.
- Now, put the earbuds back into the charging case, and remove them after a couple of seconds.
- Then turn on your device’s Bluetooth and select Tozo T6 from the list of available devices.
Once you have been able to pair Tozo T6 earbuds with your device, and it works perfectly well, it implies that you have resolved the issue that prompted the reset.
How to Pair Tozo T6 to Laptop
You can conveniently use the Tozo T6 earbuds with any laptop of your choice, as long as the laptop has Bluetooth.
You can pair Tozo T6 to your windows laptop by following the steps below.
- Take the Tozo T6 earbuds from the charging case and wait 10 seconds for them to power on automatically and connect.
- Once the earbud’s light alternates between red and blue lights, it implies that the earbuds are ready for pairing.
- Then go to your laptop Bluetooth setting and enable it.
- Then click on the Add a device option and select the Tozo T6 earbuds.
You can then begin to use your earbuds with your windows laptop.
You can also pair the Tozo T6 earbuds with your MAC laptop by following the instructions below.
- Remove the earbuds from the charging case, and they will automatically turn on and connect within 10 seconds.
- Then you should see the light on the earbuds alternating between red and blue to show that the earbuds are ready for pairing.
- Then go to your MAC’s control center and turn on your Bluetooth.
- Then select your Tozo T6 from the Bluetooth device list to pair with the MAC.
Once you have been able to pair Tozo T6 earbuds with your laptop of choice, you can begin enjoying the earbud’s sound quality and other features.
How to Resolve Tozo T6 not Pairing
It can be pretty annoying to be unable to pair Tozo T6 earbuds to any device of your choice, but thankfully, you can always resolve this issue by resetting the earbud.
You can reset your Tozo T6 earbuds by following the instructions below.
- Turn off Bluetooth on your device and unpair the earbuds from it.
- Turn off Bluetooth on your device and unpair the earbuds from it.
- Then take the earbuds out of the charging case and wait till they start to flash red and blue alternately.
- After that, tap the earbuds three times to turn off and reset them.
- Place the earbuds back into the charging case and take them out after a short while.
- Then, switch Bluetooth on your device and choose Tozo T6 from the available devices.
If you have been able to pair with your device successfully, it implies that you have been able to resolve the issue of the Tozo T6 earbuds not pairing.
Conclusion:
This article has explained how you can pair Tozo T6 earbuds with any device of your choice.
We also looked at how you can reset the earbuds when they are not functioning as expected.