How to Reset Skullcandy Wireless Earbuds

Have you been having some difficulties with your Skullcandy earbuds and will like to know how to reset Skullcandy wireless earbuds? Then read through this article, as we will be looking at the steps required to reset Skullcandy wireless earbuds.

The Skullcandy wireless earbuds are the budget earbuds of choice for many people because they offer excellent quality at an affordable mid-range price. It is also straightforward to use, and it is pretty durable.

The steps required to reset Skullcandy wireless earbuds are pretty straightforward, and it is almost the same process for each model of the Skullcandy wireless earbuds.

In the sections of this article, we will be looking at how to reset the different models of the Skullcandy wireless earbuds.

How to Reset Skullcandy Wireless Earbuds

When your Skullcandy wireless earbuds are not functioning correctly, a tested troubleshooting approach to fixing the issue is to reset Skullcandy wireless earbuds.

There is a slight difference between the methods of resetting the different models of the Skullcandy wireless earbuds, majorly due to the placement of the buttons on each model.

There is, however, a general method you can use regardless of the model of your Skullcandy wireless earbuds, and in the section below, we will look at the general approach.

reset Skullcandy wireless earbuds

The General Method of Resetting Skullcandy Wireless Earbuds

The steps outlined below are the general methods to reset Skullcandy wireless earbuds regardless of the earbud model. It is also straightforward to follow.

  • Ensure that your Skullcandy wireless earbuds are not currently paired to any Bluetooth device.
  • Then turn off your Skullcandy wireless earbuds with the power button.
  • Now press and hold the volume + button and the power button for approximately 5 seconds before releasing it.

If you have followed the instructions listed above, then you have been able to reset Skullcandy wireless earbuds. Note that your earbuds’ Bluetooth device pairing list will be deleted, so you have to re-pair your Skullcandy wireless earbuds to your Bluetooth device.

reset sesh skullcandy

How to reset Skullcandy Wireless Earbuds Sesh

You can easily reset Skullcandy wireless earbuds sesh model by following the below steps.

  • Unpair your sesh Skullcandy wireless earbuds from the paired device by turning off Bluetooth on your Bluetooth device.
  • Then remove the sesh Skullcandy wireless earbuds from the device Bluetooth pairing list.
  • Now remove your sesh Skullcandy wireless earbuds from its case.
  • Then press and hold the button on your earbuds for approximately 6 seconds to manually turn it off.
  • Once turned off, press and hold the button again for about 10 seconds to completely reset the earbuds.
  • Put your earbuds back into the case for a couple of seconds, and once the LED light on the earbuds flashes red, take the earbuds out of the case.
  • Your earbuds will then sync together and simultaneously flash a blue LED light, signifying a successful sync.

If you have followed the steps as written above, then you have been able to reset Skullcandy wireless earbuds sesh and can now pair them back to a Bluetooth device.

skullcandy dime

How to Reset Skullcandy Dime Wireless Earbuds

You can reset Skullcandy dime wireless earbuds by following the steps listed below.

  • Unpair your Skullcandy dime wireless earbuds from the connected device, and delete them from the device Bluetooth pairing list.
  •  Then remove the Skullcandy dime wireless earbuds from the case.
  • Now press and hold the buttons on the Skullcandy wireless earbuds for approximately 5 seconds to reset it.

If you have followed the steps above, you have been able to reset Skullcandy dime wireless earbuds. Your earbuds will then enter pairing mode, signified by a voice prompt and the LED light on your earbuds flashing blue. You can now pair your wireless earbuds with a Bluetooth device.

skullcandy indy

How to Reset Skullcandy Indy Evo Wireless Earbuds

You can reset Skullcandy indy Evo wireless earbuds by following the steps outlined below.

  • Disconnect your Skullcandy indy Evo wireless headphones from the connected device, and remove them from the device Bluetooth pairing list.
  • Then turn off your Skullcandy indy Evo wireless headphones.
  • Now press and hold the buttons on your indy Evo wireless earbuds for approximately 10 seconds to reset them.

If you have followed the steps listed above, you have been able to reset Skullcandy indy Evo wireless earbuds and can now pair them with a Bluetooth device and use them as you deem fit.

skullcandy push

How to Reset Skullcandy Push Wireless Earbuds

You can reset Skullcandy push wireless earbuds by following the steps outlined below.

  • Unpair your Skullcandy push wireless earbuds from the connected device, and remove them from the device Bluetooth pairing list.
  • Then remove the push wireless earbuds from the charging case and turn it off manually.
  • Once you have turned both earbuds off, press and hold down the power/MFB button for approximately 10 seconds to completely reset them.
  • Then put your push wireless earbuds back into the case for a couple of seconds, and once the LED light on the earbuds flashes red, take the earbuds out of the case.
  • Your push wireless earbuds will then sync together and simultaneously flash a blue LED light, signifying a successful sync.

If you have followed the steps listed above, you have been able to reset push wireless earbuds and can now pair them to a Bluetooth device.

Skullcandy JIB

How to Reset Skullcandy JIB Wireless Headphones

You can reset Skullcandy JIB wireless headphones by following the steps listed below.

  • Unpair your Skullcandy JIB wireless headphones from the paired device, and remove them from the device Bluetooth pairing list.
  • Remove your JIB wireless headphones from the charging case, and press the button on both earbuds for about 5 seconds to turn it off manually.
  • After turning the earbuds off, press and hold the button again for approximately 10 seconds to completely reset them.
  • Put your JIB wireless headphones back into the case for a couple of seconds, and once the LED light on the earbuds flashes red, take the earbuds out of the case.
  • The JIB wireless headphones will then sync together and simultaneously flash a blue LED light, signifying a successful sync.

How to Pair Skullcandy Wireless Earbuds Together

You can easily pair Skullcandy wireless earbuds together by following the basic steps listed below.

  • Put your Skullcandy wireless earbuds into its case, and once a solid red LED light shows on both earbuds, you should close the lid of the case.
  • Now activate pairing mode on your earbuds by removing them from their case.
  • Then go to your device Bluetooth settings, and from the list of devices available for pairing, select your Skullcandy wireless earbuds.

If you have followed the steps listed above, your Skullcandy wireless earbuds will automatically pair with your device, and you can now begin to use them as you deem fit.

Conclusion

This article has explained how to reset Skullcandy wireless earbuds by looking at the different models and how to reset them.

We also looked at how to pair your Skullcandy wireless earbuds to your device, which is the next required step after you have been able to reset Skullcandy wireless earbuds.

You can also check out How to Charge SkullCandy Earbuds

Leave a Comment