If you are facing issues with your Apple TV remote, such as the volume button becoming unresponsive or Apple TV remote not working or the volume on Apple TV remote not working whether 1st or 2nd or 3rd generation. However, problems like these occur when the remote is not properly connected to your Apple TV.
Fortunately, resolving this problem does not require complex troubleshooting or expert intervention with this guide you will learn “how to restart & pair Apple TV remote” right away to avoid things like pair apple tv remote 3rd generation not working.
You can effectively resolve issues with all-generation Apple TV remotes while also re-establishing their connection with the device.
While all the cases might not actually be caused by a bug or by the remote firmware, a low battery level or obstructions between the remote and Apple TV; updating your Apple TV to the latest firmware, removing obstruction between your TV and the remote, and changing the battery could be all you need to do to fix and pair your Apple TV remote again.
So you need to ensure everything is in order before going through with the procedures on How to Restart and Pair an Apple TV Remote.
How to Restart & Pair Apple TV Remote
With a simple restart, you can fix all problems associated with your TV. However, you may also need to dig deeper with restarting the TV didn’t fix the said problem. However, we will discuss not only how to restart your Apple TV remote to fix the remote not working but we will also state some other troubleshooting tips you can beckon on to fix and pair your Apple TV remote not working.
How to Restart Apple TV Remote
By performing a restart, you can reestablish the connection between your all-generation Apple TV remote and the Apple TV itself.
This process can help resolve connectivity issues and ensure that your remote functions properly.
If you are here for that, I will take you through the steps to restart your Apple TV remote to enable you to regain full control.
- Grasp the control centre button and volume down button for 5–10 seconds.
- Release your grip on the buttons when the status light on your Apple TV turns off and then back on.
- Shortly after, the Remote Connection Lost message will show on your Apple TV screen.
- The remote will automatically restart in 10 seconds.
- When it restarts, the “Remotely Connected message will be displayed.
How to Pair Apple Remote to Apple TV
Once you have successfully restarted your Apple TV remote, the next step is to pair it with your Apple TV again. Pairing ensures that the remote is correctly synchronized and able to communicate with your Apple TV.
By following a few simple steps, you can establish a seamless connection between the remote and your device.
Here’s how to pair an Apple remote to Apple TV:
- Point your remote 3 inches away from your Apple TV and point it toward the device.
- Simultaneously press and hold the back or menu button and the volume up button for 5 seconds.
- Place the remote on top of your Apple TV.
- The remote should successfully pair with the Apple TV within a few seconds.
Recommended: [Fixed] Apple TV Blinking Light
What if your Apple TV remote is not working after you have successfully paired the remote to your Apple TV? Well, for the benefit of the doubt, we will consider the steps to take to fix a paired Apple TV remote that is not working
Why is my Apple TV Remote Not Working
If you’ve ever found yourself in the frustrating situation of trying to operate your Apple TV with the remote only to discover that your remote isn’t responding, you’re not alone.
While it may seem like a complex issue to resolve, there are a few simple troubleshooting steps you can take before calling a repairer.
In some cases, a simple restart might reactivate the remote control, but if that doesn’t work, try resetting the connection or performing a soft restart. These steps can often solve most problems associated with your Apple TV remote.
Therefore, the following tips could help fix your Apple TV remote not working when you don’t expect it.
1. Power-cycle your Apple TV
Occasionally, minor technical hiccups can prevent your remote from establishing a connection with your Apple TV. Performing a quick soft reset can effectively resolve these problems.
To initiate a soft reset on your Apple TV, follow the steps I will be highlighting below from start to finish.
- Disconnect the Apple TV box from the power source and allow it to remain unplugged for 30–60 seconds.
- Reconnect the Apple TV to the power source and restart it.
- This procedure will help fix any issues with the Apple TV remote not working properly.
2. Update your Apple TV Firmware
Updating the firmware on your Apple TV device not only fixes pairing issues but also helps avoid numerous other challenges such as lagging, potential data loss, breaches in security, etc.
Follow these easy steps listed below to keep your Apple TV firmware up-to-date and enjoy improved performance and enhanced protection against vulnerabilities:
- Turn on your Apple TV and open the Settings.
- Go to System Settings.
- Select Software Updates.
- Choose the Update Software option.
- If any updates are available, click Download to install them.
Once the download process is completed your TV will restart multiple time. Once the update is completed your TV will be in a good other.
3. Contact Apple TV Support
If you’re experiencing problems with your Apple TV and remote not working together, it’s important to seek help from Apple’s customer service.
They have experts who can assist you with fixing software and connection issues. By reaching out to them, you can resolve any concerns and ensure that your Apple TV works properly.
Their professional assistance will help reduce downtime and extend the lifespan of your electronic devices.
Following the Apple customer guide will allow you to enjoy secure and convenient entertainment experiences with your family.
How to Reset an Apple TV Remote
There are many ways to reset your Apple TV remote, and they are designed to work with all types of remotes that are compatible with your Apple TV.
These methods ensure that your preferred features and advanced smart capabilities are preserved, even though different models may have similar functions.
Here is how to go about that.
- Unplug your Apple TV from its power source and wait at least six seconds.
- Plug the Apple TV back in and wait for the home screen to reappear. Once it does, try using your remote to check if your connection has been reset.
Alternatively, you can do these:
- Firstly, unlink your Apple Remote from your Apple TV, press and hold the ‘Menu’ and ‘Left’ buttons until you observe an image of a remote with two non-touching ovals at an angle, which should take approximately six seconds.
- When the image appears, press and hold the ‘Menu’ and ‘Right’ buttons on your Apple Remote until you see a logo of a remote with the two ovals overlapping, resembling chain links. This indicates the link has been re-established with your Apple Remote.
- Test your remote to confirm it is working.
Pair Apple TV Remote 3rd Generation to Smartphone
If you are using a 3rd generation Apple TV follow the steps to learn pair apple tv remote 3rd generation to your smartphone.
Below are the steps you should follow to do that.
- Point your remote 3 inches away from your Apple TV and point it toward the device.
- Simultaneously press and hold the back or menu button and the volume up button for 5 seconds.
- Place the remote on top of your Apple TV.
- The remote should successfully pair with the Apple TV within a few seconds.
Conclusion
Restarting and pairing your Apple TV remote is a straightforward process that can resolve connectivity issues and restore optimal functionality.
By following the recommended steps on “how to restart and pair your Apple TV remote”, such as performing a soft reset or unpairing and re-pairing the remote, you can overcome minor technical glitches and ensure seamless communication between your Apple TV and its remote.