As little and simple as your Apple Watch can be, it can also develop some glitches that make it get stuck on the Apple logo after unpairing. Although this issue is very common with the Apple Watch, it can be easily fixed if you thoroughly follow through with this article on how to fix the Apple Watch stuck on Apple logo after unpairing.
One of the most common problems with Apple Watches is getting stuck on the Apple logo, presenting a blank screen and pushing you to search for a solution as soon as possible. Well, you can check the article above, we have a list of steps to take when your Apple Watch gets stuck on the Apple logo screen. So, if you want to know why and fix your Apple Watch that got stuck on the Apple logo after unpairing kindly check out this guide.
How to Fix the Apple Watch stuck on Apple Logo after Unpairing
When your Apple Watch gets stuck on the Apple logo after you unpair it, it is usually due to a software crash while turning on, which causes your watch to freeze. You can reboot a frozen Apple Watch by exploring different methods.
Reboot your Apple Watch
The first method to try is an old one. Many times, turning off a device and then turning it back on works. So, before you begin troubleshooting your Apple Watch, try rebooting it. Here’s how to restart your Apple Watch:
- Press and hold the side button on the Apple Watch’s sidebar until the screen displays the power off slider.
- Drag the slider to turn off the Apple Watch and wait a few seconds before pressing the side button again to reactivate it.
Ideally, this should solve the problem. If that doesn’t work, try the next way to fix the issue.
Ping the Apple Watch via iPhone
If you are unable to use your Apple Watch and it’s stuck at the Apple logo screen, you should reconnect to your Apple Watch using your iPhone. In this instance, you can use the FindMy app to ping the Apple Watch.
With the steps below you will get to know how to ping the Apple Watch from your iPhone if the Apple Watch is stuck on the logo screen.
- Go to the Watch app on your iPhone that is paired with your Apple Watch
- Select the MyWatch option.
- Now, in the top left corner, tap on the All Watches option.
- Tap the Eye button in front of the connected watch name
- Select the Find My Apple Watch option.
- The FindMy app will now launch automatically and may prompt you for your login details.
- Click on the Apple Watch you want to repair from the list of devices.
- Now press the Play sound button.
Returning to the main menu, should fix the issue and restart your Apple Watch. If that doesn’t work, try again and press the Play button a couple more times.
Check Accessibility Settings
If the previous method did not resolve the problem of the Apple Watch being stuck on the Apple logo after unpairing, try this method. Another reason for this problem with your Apple Watch could be the Accessibility settings. Please take the following steps to fix this error:
- Go to your paired iPhone’s Apple Watch app.
- Now, on this screen, navigate to the Accessibility menu.
- Select the VoiceOver option to change its settings.
- Check the VoiceOver option in the Vision section.
- Otherwise, use the toggle bar to turn it off.
- Return to the Accessibility options and scroll down until you reach the bottom.
- The Accessibility Shortcut button can be found here.
- Make sure that all of the options are turned off. Check that all toggle bars and checkboxes are turned off or unchecked.
It should clear the problem screen and allow you to use your Apple Watch again. If this does not work, try the next method to try to fix the error.
Pair and Un-pair your Apple Watch
Another thing you can do with your Apple Watch is pair and unpair it with your iPhone. You can do this by following the procedures outlined below:
- Navigate to the Watch app on your iPhone and select All Watches.
- Tap on the watch symbol on the screen and select Unpair Apple Watch depending on the device name.
- Remember to use the same linked device that you gave to the Apple Watch when it displayed the problem message.
Return to the All Watches section and re-pair the device once it has been unpaired. It will resolve the Apple Watch stuck in the Apple logo after unpairing.
Drain the Battery of the Apple Watch
If your Apple Watch gets stuck after unpairing, it may not allow you to move past the Apple logo screen. However, you can fix this by draining the battery of the device.
You can start by doing a force restart on your Apple Watch and put it aside until the device’s battery has gone zero. Beware, this method is time-consuming and may take up to two days to drain the battery.
Once you completely drain the Apple Watch’s battery, please put it back on charge. Now, wait until the Watch is 100% charged. It should fix the problem, and your Apple Watch should start functioning correctly now.
Factory Reset your Apple Watch
It is also possible that your Apple Watch is getting stuck on the Apple logo due to a file corruption in the watchOS, or the OS failed to take a recent update, causing failure to load the screen.
You should perform a Factory Reset on your Apple Watch to clear the error if this is the case. You can decide to use any of the three methods below to do this:
Using the iCloud website:
The first method to perform a factory reset is using the iCloud website.
- When you force restart your Apple Watch, but it is still stuck on the Apple logo, go to the iCloud site using a web browser on your iPhone.
- Now, go to the Find My iPhone menu and select All Devices.
- After that, select Erase the Apple Watch from the paired Apple Watch menu.
- Choose the Reset option to reset your Apple Watch. It should do the job.
Check to see if the error has been fixed and if you can use your device again. If not, proceed to the next reset method.
Reset via Watch App:
If the first reset method did not work, try resetting the device through your iPhone’s Watch app:
- Navigate to the main screen of your paired iPhone and look for the Watch app.
- Open the app and select the My Watch option.
- Go to the General menu and select the Reset option.
- Now, select Erase Apple Watch Content & Settings.
It should clear the problem and restore your Apple Watch to normal operation.
Hard Reset the Apple Watch:
If the Watch app reset did not work, you should try the hard reset option now. A hard reset does not erase your Apple Watch’s data and can be performed by following these steps:
- Press the side button and the Crown button on the side of your Apple Watch at the same time.
- Hold both of them for a few seconds. If the device resumes regular operation, the error has been resolved.
- If you want to upgrade your Apple Watch, make sure you have enough storage space on your iPhone.
- You should remove any unwanted media that is already synced with your Watch.
- After you’ve cleared the storage, try updating the Apple Watch again.
Contact Apple Support
If you are unable to access the main screen of your Apple Watch once the Apple Logo appears, you should contact Apple Support. Since these devices are covered by a warranty, the technical experts at the support centre may troubleshoot or repair them to get the Apple Watch working again.
Using the techniques outlined above, you should be able to fix the Apple Watch stuck on the Apple logo after unpairing. If not, you should go to an Apple Support location to obtain the assistance you need. However, we hope that this post allows you to correct the error without having to visit the centre and you can now use your Apple Watch.