How to Fix Google Wi-Fi Flashing Orange Light

If your hope is dashed when you noticed that your Google Wi-Fi flashing orange light starts again, here is a way to redeem it. Although the Google WiFi blinking orange light is not a huge problem. But it can confuse if you do not know how to fix it.

Although, Google Wi-Fi is a top-notch Wi-Fi when compared with some other routers and satellites for home use. And with the way the router is designed with indicators, customers can easily pick what happened to their device when each of the links blinks.

However, the Google Wi-Fi orange light on the other hand means that the Wi-Fi doesn’t have a network or internet access. However, the Wi-Fi orange light becomes an issue when the orange light keeps flashing non-stop.

Meanwhile, the prime suspect issue with the Google Wi-Fi flashing orange light is that the router doesn’t have internet access or connection. But, it could be more than that in some scenarios.

Causes of Google Wi-Fi Flashing Orange Light

Let’s take a look at some causes of the Google Wi-Fi flashing its orange light uncontrollable. So, when we know the reason why the Google WiFi orange light keeps flashing we will know how to possible control or fix it.

Firmware Update

The flashing orange light on your Google Wi-Fi could mean that it’s high time you upgrade the router to the latest version. Invariably, if your firmware or software is outdated, your router could be blinking the orange light uncontrollable.

No Internal Signal

If your Google Wi-Fi device is flashing orange light it can mean that your internet provider service is down or the service is under maintenance. So, at this time, if the internet connection is not working properly, your Google Wi-Fi will flash an orange light to send a signal that the internet provider’s network is not strong enough or the internet service is down at the moment.

Check your Google Wi-Fi device for a likely Problem

What if the reason why the Google Wi-Fi flashing orange light is that the Wi-Fi is at fault? It could be and it’s possible. So, since the Google Wi-Fi is replacing your primary router and the device is connected to your modem, it can cause network traffic causing the Wi-Fi to keep flashing the orange light.

Bad Google Wi-Fi Point

Your Google Wi-Fi point could be bad if the device is malfunctioning. So, this can detect a problem with the Wi-Fi internet connection and keep flashing the orange indicator to cause your attention to the bad Wi-Fi point.

Your Google Wi-Fi Cable is Faulty

You also need to put the Google Wi-Fi Ethernet cable into consideration. If the device Ethernet cable is faulty, this can affect the Google Wi-Fi device when receiving signals which of the cause will cause the orange light to flash indefinitely.

Google Wi-Fi flashing orange light

How to Fix Google Wi-Fi Flashing Orange Light

Various methods can be used to fix the Google Wi-Fi flashing different lights. However, in this regard, we will streamline our solutions to fixing Google Wi-Fi flashing light to the green light indicator.

Reset the Google Wi-Fi through the Google Home App

When you don’t want to cause further conflicts with the Google Wi-Fi or router, you must ensure that you first reset the device via the Google Home app so that when you repair the device there won’t be a problem to look after.

  • Open the “Google Home App” on your phone.
  • Go to “Wi-Fi” and open the “Wi-Fi point” to reset.
  • Scroll down and select “Factory Reset.”
  • Done.

This is the first part. This will reset the Google Wi-Fi affected node. Next, we need to proceed to reset the Google Wi-Fi router device point itself.

Reset Google Wi-Fi Point

Once you have reset the Wi-FI via the Google Home app the next thing to do is to find a way to reset the Google Wi-Fi point itself.

  • Unplug the Google Wi-Fi from the power outlet.
  • Press the “Power” button to turn off the device.
  • Press and hold the “Reset” button on the device and power on the device.
  • Keep holding the buttons for about 45 seconds or more until the light turns blue. 
  • After the blue light comes up release the buttons immediately.
  • Wait for about 10 minutes until the Google Wi-Fi device starts pulsating blue and set up using Wi-Fi. Do not use wired.

Now, check whether the Google Wi-Fi white light is no longer flashing. If it stops, it could mean that the Google Wi-Fi flashing orange light issue has been resolved.

Cold Reset or Power Cycle or Soft Reset your Router

If there is a temporary communication between the Wi-Fi and the network the router may keep flashing its orange light especially if all attempts taken by the router to unregister the Google Wi-Fi point and inject new information about the new point.

  • Reset the Google Wi-Fi point that is giving you the orange light issue.
  • Turn off the router by pressing the power button until it turns off.
  • Turn off all other available networking equipment/Wi-Fi points.
  • Remove the router “Ethernet” cable from the back of the router.
  • Reconnect the “Ethernet cable” to the respective devices after about 10 minutes.
  • Turn on the “Wi-Fi/Router and let the light be fully initiated.
  • Press the Google Wi-Fi router with the flashing orange light and see whether the connected device can connect to it.

The above process should provide a valid solution to the “Google Wi-Fi flashing orange light” and if it doesn’t. Then, you may need to restart the network from the Google Home app or the Google Wi-Fi device.

Update Google Wi-Fi Firmware

Outdated firmware can cause a lot of problems on your device such as the orange light issue. That is why it’s recommended to ensure that your devices are always up-to-date.

So, for this, we will quickly take a close look at how to update Google Wi-Fi firmware to fix the Google Wi-Fi flashing orange light repeatedly.

  1. Open the Google WiFi app.
  2. Click on the “Settings” and actions tab 
  3. Navigate to and select “Network & general.
  4. Tap WiFi point(s).
  5. Tap the “Google Wi-Fi” on the list of devices available.
  6. Scroll down to see if there is a software update available for the device.

For those using the Google Home app follow the directions below.

  • Launch the Google Home app on your device.
  • Tap the Tap on “Google Wi-Fi.”
  • Click on the “Settings” gear icon
  • Click on the Device information.
  • Scroll down to view your software version.

If there is an update available, at this point, you will be prompted to download and install the latest update.

Leave a Comment