To install a nest learning thermostat is quite easy and fast, you only need about 20 to 30 minutes to complete the installation process. It’s something you can do yourself from the beginning to the end. This article will guide you through the step-by-step process of how to install a nest learning Thermostat without any hassle.
Did you recently purchase a smart thermostat? Then, you need to follow these three major steps below to fix your device up to your central heating and cooling system. All you need is every item compiled in the box. The first step of the installation process is to remove the old thermostat, followed by mounting the Nest thermostat and finally connecting to Wi-Fi.
Having a smart thermostat in your modern home is a key asset that makes your home comfortable. The heating and cooling system is a must-have in any modern home, especially now that the systems are “smart” enough to learn your patterns of knowing when to run and when to stop running to minimize waste and also save money.
The Google Nest brand is a common choice. You need to run a compatibility check with your home’s HVAC system, once you’ve done that, you can unbox your new thermostat and ensure that all the items are complete in there.
Before you can successfully install a Nest Learning Thermostat, you need to download a recent version of the Nest app, which offers direction for the installation process. You can download the Nest app from Google Play or the Apple App Store. Immediately you have the app running on a mobile device, tablet, or laptop, you can start the installation process.
Components of a Nest Learning Thermostat
The components of a Nest Learning Thermostat include:
- Nest screwdriver
- Steel plate
- Mounting screws and wiring labels
- Pro Installation Card
- Nest Thermostat display
- Nest Thermostat base
- Trim plate
- Nest screwdriver
- Installation Guide
- Welcome Guide
The main tool needed to install a Nest Learning Thermostat is a Phillips screwdriver, which usually comes with your Nest thermostat package (It’s also known as the “Nest screwdriver” as stated above). A screwdriver of the right size and type will also be needed to unscrew your existing thermostat.
How to Install a Nest Learning Thermostat
To install a Nest Learning Thermostat, three basic stages are involved, they include; Removing your old thermostat, Mounting Google Nest, and finally connecting the Thermostat to Wi-Fi and completing the setup. Follow the steps below:
First Step: Remove Your Old Thermostat
- Turn off the old thermostat by bolting the suitable circuit breaker.
- Switch off all circuit breakers connected to your home’s HVAC system.
- Remove the old unit’s display and navigate to the Nest app. It will guide you through how to go about the wiring setup of that thermostat.
- After answering these questions, you can disengage the unit.
Note that the Nest comes with blue stickers that enable you to attach for labeling the four wires leading into that thermostat, each of which will be dedicated to a particular port.
Once you have carefully detached these wires from your thermostat, you can unscrew them from the wall and remove them. That’s it, you have successfully removed the old thermostat.
Second Step: Mount Google Nest
- Ensure you mark the position to be captured by your Google Nest Learning thermostat.
- Level it with the aid of the small onboard bubble, level and mark the new screw holes with a pencil or marker.
- Install the trim plate that comes with the unit if you will like to hide any screw holes from the old thermostat.
- Attach the Nest base to the wall.
- After attaching the Nest base to the wall, consult the Nest app, this should provide you with a custom wiring guide for installation.
- Connect the wires you labeled earlier to the Nest, and attach the Nest’s display.
That’s it! With all of this in place, you are ready to restore the power to your thermostat and HVAC system. Reset your circuit breakers appropriately.
Third Step: Connect the Thermostat to Wi-Fi and Complete Setup
Immediately the thermostat has been powered up, on-screen instructions displayed will guide you to locating your wireless network and inputting the correct password. Once the thermostat is connected, on-screen setup instructions will guide you through some further simple steps that include:
- Updating the thermostat’s firmware.
- Inspect and be sure the wiring is correctly connected.
- Recording the type of power your HVAC system is using.
- Allowing Nest discovers its location in your house.
- Finally, set your preferred temperatures for when you are home and away.
- With your Nest Learning Thermostat connected/set up and the Nest app running aptly on your mobile or other devices in your home, you are ready to start making use of its controls and third-generation learning capabilities.
Everything you need to install a Nest Learning Thermostat has been included in the box. All you need do is open the box and follow the installation and welcome guide.
If you will like to pre-drill holes, make use of a “3/32” drill bit, or in case you are drilling into hard materials, like, stone, brick, concrete, or marble, you can use a masonry drill bit and drill.
However, Nest recommends that you take a picture of your wires with your smartphone to ensure you don’t mix anything up.
How to Lebel your current wires
It’s important to label your current wires while you install a Nest Learning Thermostat so as not to mix things up. Follow the steps below to label your current wires:
- Fold the labels that came with your smart thermostat around your wires so you don’t get them mixed up.
- Make use of the label that corresponds with the current wiring system. For example, if you have a wire going into a port labeled “G”, then wrap that label around that wire.
- You don’t need to label any “jumper wires”, or wires that are not connected through your wall.
- Any wire that connects from your thermostat to another port in your thermostat can be removed and set aside. You won’t eventually need them.
Kindly note that the same installation steps used for the 3rd gen Nest Learning Thermostat are also applicable for the Nest Thermostat E.
The Nest Learning Thermostat is compatible with most standard HVAC systems. Although, it is not compatible with high-voltage systems. In case you verified your current thermostat and you saw that it is 110, 120, or 240 Volts, it will not be compatible.
A Nest Pro can even make installation much easier. It’s very simple to install a Nest learning thermostat yourself on most systems. In case you don’t want to install a Nest learning thermostat yourself, you can always contact the installation partner, OnTech, to help you check your system’s compatibility, install, and set up your Nest products. Once they have completed the installation process of your Nest thermostat, they might give you a demo and also give you the platform to answer any questions you have. In case you purchased a Nest thermostat from a pro and have them install it, you are entitled to an extended Pro Warranty.
I hope this article has helped you install a Nest Learning Thermostat in your modern home? If yes, feel free to drop a comment in the section below. Thanks for reading thus far, stay tuned for more related articles from our domain.