- Advertisement -

How to Set Boundaries on Oculus Quest 2

Did you recently acquire the Oculus quest 2 virtual reality device, or were you given one as a gift, and would you like to set boundaries on Oculus quest 2? Then you are in the right place, as this article will explain how to set boundaries on Oculus quest 2.

The Oculus quest 2 virtual reality device has in-built sensors that you can use to turn a particular area into a VR space. 

It also has a guardian system that lets you set the boundary in the room or area you would like to use as the VR space. The boundaries will typically appear to warn you when you get too close to your play area.

The section of the article below will teach you how to set boundaries on Oculus quest 2.

What are the Oculus Guardian Modes

The Oculus quest 2 guardian systems come in two different modes you can choose from. We have the stationary mode and the roomscale mode.

Stationary Mode

When you select the stationary mode, it creates a default guardian boundary of 3 feet by 3 feet that will be centred on you. You should only use this mode when you are using your Oculus quest 2 headset while sitting or standing in a particular spot.

- ADVERTISEMENT -

Roomscale Mode

When you select the roomscale mode, you can use your touch controllers to define your guardian boundaries in your physical space. You should use this when you intend to use your Oculus quest 2 headset while moving around in your play area. It is recommended that you use an unobstructed space of at least 6.5 feet by 6.5 feet as your boundary area.

So depending on how you want to use your Oculus quest 2 headset, you can choose the boundary mode you think will suit you best.

How to Set Boundaries on Oculus quest 2

You can use stationary or roomscale mode to set boundaries on Oculus quest 2. This section of the article will explain how to use either mode to set boundaries on Oculus quest 2.

You can also check out How to Change Admin on Oculus Quest 2

How to set Stationary Boundaries on Oculus Quest 2

You should only use the stationary mode when you intend on using your headset while sitting or standing in a particular solution.

You can set stationary boundaries on Oculus quest 2 by following the instructions below.

- ADVERTISEMENT -
  • Press the button on your Oculus right touch controller to access the universal menu.
  • Hover on the clock on the left side of the universal menu and select quick settings when it appears.
  • Then select Guardian from the quick settings panel.
  • Then select stationary and follow the prompt that will appear on your screen to complete the setup.

If you have followed the steps above, then you have been able to set stationary boundaries on Oculus quest 2. However, remember that the stationary boundaries will only assign a default system of 3 feet by 3 feet.

set stationary boundaries on Oculus

Replace Oculus Accessories

You can replace your Oculus accessories following the link below with at least a 25% discount

How to Set Roomscale Boundaries on Oculus Quest 2

If you prefer moving around within your play area, then the best guardian mode is the roomscale mode. You can set roomscale boundaries on Oculus quest 2 by following the steps below.

- ADVERTISEMENT -
  • Click on the icon on your right touch controller to bring up the Oculus universal menu.
  • Now hover on the clock showing on the left-hand side of the universal menu screen, and select quick settings as soon as it appears, to access the quick settings panel.
  • Then from the quick settings panel, click on Guardian.
  • Then from the guardian options, select the roomscale mode and follow the ensuing instructions that will show on your screen.

If you have followed the instructions given above, then you have been able to set roomscale boundaries on your Oculus quest 2.

Always remember to leave a minimum of 6.5 feet by 6.5 feet of unobstructed space as your boundary area.

How to Reset Boundaries in Oculus Quest 2

You can reset boundaries in Oculus quest 2 using the same method you used to set boundaries in Oculus quest 2. Follow the instructions below to reset boundaries in Oculus quest 2.

  • Access the universal menu by clicking on the icon on your right controller.
  • Then open the quick settings panel by hovering on the clock on the left side of the universal menu and selecting quick settings.
  • Now, select Guardian from the quick settings panel.
  • Then select either stationary or roomscale from the guardian options. 
  • After selecting your preferred boundary mode, follow the on-screen instructions to complete the setup.

If you have followed the instructions given above, you have been able to reset boundaries in Oculus quest 2.

Advanced Oculus Guardian Settings and their Meaning

Apart from setting boundary modes using the guardian systems, there are still other settings that you might be interested in applying to your guardian system. Some of them are listed below.

- ADVERTISEMENT -
  • Adjust Guardian: This setting takes you back to the guardian setup, just like the first time you set up your Oculus headset.
  • Set floor level: This allows you to set and adjust the floor level for your guardian boundary.
  • Boundary Color: You can use this option to change the colour of your guardian boundary.
  • Double Tap for Passthrough: This option allows you to switch to and from passthrough mode just by double-tapping the side of your headset.
  • Clear Guardian History: This option allows you to clear all guardian history from all accounts connected to your Oculus quest 2 headset.
  • Glanceable Boundary: This setting, when enabled, allows you to see from an angle where you are in your play space in VR.
  • Boundary Sensitivity: This allows you to set your guardian boundary alerts, and you have either the simple or advanced option to choose from.

You can add some or all of these advanced settings features to setting boundaries on Oculus quest 2.

advanced Oculus guardian setting

What are Oculus Quest 2 Boundary Limits

The Oculus quest 2 guardian system has two boundary modes. For the stationary mode, the boundary limit is a fixed 3 feet by 3 feet.

For the roomscale mode, the boundary limit is not fixed, but it must be at least 6.5 feet by 6.5 feet of unobstructed space.

Conclusion:

This article has discussed how to set and reset boundaries on Oculus quest 2. We also looked at some of the advanced features of the Oculus quest 2 guardian system.

Related Posts

Leave a Comment