We believe you own a Frigidaire ICE maker if you are reading this article or you are a technician looking for a way to make your ICE maker’s lifespan increase. Either way, whatever you think about the Frigidaire ICE maker troubleshooting tip in this article as we will enlighten you and put you through the steps to take to resolve it.
So, in this article, we would be discussing the general Frigidaire Ice maker troubleshooting procedures that you can easily follow to fix all issues you might encounter while your ice maker.
Why is my Frigidaire Ice Maker not making Ice?
Your Frigidaire ice maker won’t just stop working for no reason, something must have triggered it to stop making ice properly or not making it at all. Here are some of the factors causing your Frigidaire ice maker not to make ice:
- Wrong freezer Temperature.
- The ice tray has been jammed.
- Insufficient water supply to properly freeze.
- Faulty/Clogged Water Filter.
- Once your Refrigerator is not balanced, the ice maker may also be off-level.
- Wrong Installation process.
- Damaged water Inlet Valve.
- Faulty Door Switch.
- Defective or frozen Ejector Assembly.
- Defective Door Seal.
- Faulty Ice level control board.
- Defective Ice maker mold Thermostat.
- The ice maker control arm is off.
- The refrigerator water line is frozen.
Frigidaire Ice Maker Troubleshooting Tips
Below are some of the Frigidaire ice maker troubleshooting tips that will provide lasting solutions to the no icing issues you may encounter with your ice maker. Follow the steps below:
Ensure your Ice Maker is Properly Installed
The first thing to do when your ice maker won’t make ice again is to thoroughly check the installation process and adjust where necessary. You can do this by following the steps below:
- Check to ensure that all fittings are firmly secured and that the ice maker itself is properly leveled.
- In case you have a bent piece, detach and rebend it or simply replace it if need be.
- Search for any worn-out elements and replace them before going to the next stage.
If this Frigidaire ice maker troubleshooting tip doesn’t work, then you can try the next fix.
Inspect the Water Line
Do you know that your ice maker’s problem could be related to the water supply? Once your ice make can’t produce ice, there won’t be enough water to properly freeze. This issue may be caused by a clog somewhere in the water line or a damaged filter. To troubleshoot, follow the steps below:
- Check the water line for any visible kinks or serious bends, which could inhibit the flow of water to your machine.
- It’s very easy to ignore the waterline, but it’s essential to clean this part of your fridge from time to time.
- The area behind the fridge is easily vulnerable to regular buildup.
- To ensure that water is flowing freely, always check all the equipment around your water line for any visible signs of buildup.
- In case you observe that the water valve at the back of the fridge is closed, then this can affect your water line big time.
If this Frigidaire ice maker troubleshooting tip doesn’t work, then you can proceed to the next fix. 
Unclog the Ice Tray
Ice can stand on its very own, even though it’s common for the cubes to cling collectively. However, if your manual ice tray has never disappointed you before, it could be since you haven’t washed it since the previous time you used it.
In case your ice refuses to come out of the tray after freezing, try to heat the tray at some stages in this freezing procedure, which will enable you to release the ice.
To free up your ice tray, follow these easy steps below:
- Run the hot water tap to warm up the sink in the kitchen.
- Pour a cup of hot water into the frozen ice maker tray.
- This can soften the existing ice at the side of something that might be causing the ice to stick.
- Before the next batch starts to replenish the ice maker, make sure that there are no leftover chips within the ice tray.
If this Frigidaire ice maker troubleshooting tip doesn’t work, then you can proceed to the next fix below.
Change the faulty Water Filter
Make it a maintenance future to always replace your fridge water filter at least every 6 months, that’s making twice every year. The more often you use the water filter, the more bacteria and other minerals it accumulates, and the less filtered your water becomes.
- Once you cultivate the habit of replacing your fridge’s water filter every 6 months (or as soon as you observe a decrease in water flow), this will help reduce mineral build-up and ensure that in the most essential part of your fridge, the water stays as crystal clean as possible.
- If the water filter begins to get clogged, there will be an interruption between the water line and ice production.
- You can change your clogged water filter to a new one quickly.
- You can as well reset the filter light and the ice maker itself once everything is accurate and set to go.
If this Frigidaire ice maker troubleshooting tip doesn’t work, then you can proceed to the next fix below. 
Remove all stuck Ice in the mold
Most ice makers have one problem common to them all which is they produce deformed ice, cracked ice, and fluffy frosted ice. This usually occurs when a complete batch of ice gets stuck in the molds. Once this occurs, no new ice can be produced and the water line may also get blocked since it can’t fill the tray.
To make sure that your refrigerator maintains the production of clear ice, follow the steps below:
- Remove all stuck ice from your Frigidaire ice maker with a bottle of warm water before turning on the appliance again.
- You don’t need to waste money on costly chemicals, all you have to do is run a bowl of hot water over the hook assembly till the water runs clear.
- Once the bin has been emptied, then you can continue making ice as usual.
In case this Frigidaire ice maker troubleshooting tip doesn’t work, then you can proceed to the next fix below. 
Adjust the Freezer Temperature to Standard
If your thermostat is set to the wrong temperature, you may encounter problems while making ice. Notwithstanding if you are using a dial or digital display to control your fridge’s temperature, once it’s not set at the standard temperature, you may end up damaging your ice maker.
In case you only have one temperature dial on your fridge-freezer unit, then there’s a high tendency that this is why your ice maker can’t make ice. Having two separate dials is usually not common, however, if you have them, proceed to turn each one down by just a few notches.
- Locate your fridge thermostat and regulate the temperature appropriately.
- If your ice is melting, make the freezer get colder by decreasing the temperature setting.
- In case your ice is still frosty or won’t fall, you can set it just a little warmer.
In case this Frigidaire ice maker troubleshooting tip doesn’t work, then you can proceed to the next fix below.
Level your Ice Maker
When your refrigerator isn’t leveled, it can cause your ice maker not to produce ice! Yes! There’s a possibility that your ice maker is also off-level. Placing your fridge in the wrong way can affect the way the ejector assembly functions and therefore, cause crushed ice instead of nice, fluffy cubes of it.
To avoid this issue, ensure that the bottom of the fridge and the freezer floor is on equal elevation.
- Make use of a level at the bottom of the fridge and freezer so you can check that the refrigerator is on a balanced level.
- If necessary, rearrange the feet of the refrigerator till it’s leveled.
- Then, you will need to adjust the ice maker itself accordingly.
In case this Frigidaire ice maker troubleshooting tip doesn’t work, then you can go ahead to the next fix below.
Replace the Water Inlet Valve
The valve is designed to supply water to the fridge. However, it can be affected by low water pressure, which makes it necessary for you to check the gauge if the valve is not producing ice or water.
Once this part has been damaged or it’s malfunctioning, it can cause issues with dispensing both ice and water. To test and replace the water inlet valve if faulty, follow the steps below:
- Switch off the water supply and disconnect the refrigerator.
- If you can easily access the valve, disconnect it and measure its resistance with the aid of a multimeter.
- If it has an open-circuit reading, disconnect the refrigerator and change the valve to a new one of the same size.
- Finally, re-arrange all parts and connect your refrigerator back on.
- The ice maker should begin making perfect-shaped cubes again.
In case this Frigidaire ice maker troubleshooting tip doesn’t work, then you can go ahead to the next fix below. 
Test the Door Switch for Continuity
The door switch serves as a safety feature on the refrigerator. It’s designed to turn off the ice and water dispenser whenever the refrigerator door is opened, to prevent possible casualties.
Once the door switch is faulty, ensure you use a multimeter to test for continuity. In case there is no continuity, replace it with a new one to restart using the dispenser.
In case this Frigidaire ice maker troubleshooting tip doesn’t work for you, then you can proceed to the next fix below.
Change the Defective or Frozen Ejector Assembly
The ejector assembly is one of the important components of ice production, however, it can malfunction too. The ejector system consists of three main parts, namely, the motor, worm gear, and wiring, all of which can cause issues. Once your system malfunctions, you may need to buy one of these parts, but you never can tell which exact needs replacement until you test it. Follow the steps below:
- Look over for an ice dam first, in case you locate one blocking the chute, you can clear it with a broom.
- If not, search for several pieces of ice or a layer of frost; then remove them with a broom and rinse the chute with a hose.
- From there, inspect the gear, motor, and flap to ensure each piece is working perfectly.
- If they are not, then you need to replace the exact piece or the complete assembly to make your ice maker work effectively again.
In case this Frigidaire ice maker troubleshooting tip doesn’t work, then you can proceed to the next fix below. 
How to Reset Ice Maker
Resetting most devices usually begins with pressing the power button which may fix any issue. Any time you are stuck, you can simply power-cycle the machine as this might help. Most modern appliances do have a reset button located behind or at the top to place the device back to its default mode.
In case your Frigidaire ice maker is not making ice, you should try to reset it. In most models, the reset procedure is similar. Follow the steps below to reset your ice maker:
- Turn off and then turn the ice maker back on for this to work.
- Also, verify the power source to ensure it’s working properly.
- Some refrigerators are designed with a safety switch that helps to disable the ice maker in case there is a power outage.
Resetting the ice maker is a simple and fast process. It is performed at the back of the refrigerator and in some other cases, you may need a screwdriver. Setting your ice maker back to its defaults should resolve the issue and cause the ice production to begin shortly after.
How to clean a Frigidaire Ice maker
Since the ice maker is usually located in the freezer part of a refrigerator and it’s vulnerable to freezing harmful bacteria in the water, it is very important to clean it unless you want to get ice cubes with pathogens and dirt. I’m sure you don’t want that. Follow the steps below to clean a Frigidaire ice maker:
To clean an ice maker, you need the following items:
- Clean Dry Clothes
- Detergent Powder/ Mild cleaning solution
- Gloves
- Some Pieces of Lemon/ Lemon juice
- Sponges
- Vinegar
- Warm Water
Follow these steps to clean your ice maker;
- Disconnect your Frigidaire ice maker or fridge before the cleaning process to avoid getting electrocuted in case you tamper with some wires.
- Detach your ice bin from the ice maker.
- Make sure you wear hand gloves to avoid contaminating the ice and to prevent your hands from freezing.
- Make use of warm water with a mild detergent to clean the internal and external parts of your Frigidaire ice maker.
- Thoroughly rinse off the soapy water to remove any soap as this can contaminate your ice cubes and make them taste soapy which you won’t like.
- You can also use a mixture of lemon and vinegar and warm water to clean your ice bin and the internal part of the ice maker.
- This will prevent you from getting soap-tasting ice cubes.
- Now, make use of a soft cloth to dry off the Ice Bin’s internal and the external parts of your Frigidaire.
- Ensure the Ice Bin is cmpletely dried offo before gently placing it back inside the Frigidaire ice maker.
- Finally, connect your ice maker or refrigerator back in for it to begin ice production again.
This article has provided the basic Frigidaire ice maker troubleshooting steps for you. I hope you were able to solve your ice maker not making ice problems. If yes, kindly drop your comment in the section below and let us know which of the troubleshooting point worked for you.