When travelling or moving to a new home, one of the things that may come to mind is how to turn off your Roomba vacuum to avoid damage but you don’t know how to do that. Well, if you are a complete novice and you don’t know to softly turn off Roomba vacuum cleaner here is your solution guide.
In such a case, all you have to do is press the “Clean” button for at least 3 seconds. Your Roomba vacuum will be turned off.
However, you might come across a scenario where your Roomba is not turning off even after pressing the clean button for 3 seconds. If it comes to this, there are a few alternatives to solving this.
And in this article, I will be breaking down how to turn off your Roomba vacuum and how to forcefully turn off your vacuum cleaner if it won’t go off at a single click.
Recommended: Best cheapest vacuum cleaner under $200
How to Turn Off Roomba
According to the manual:
If you want to turn off your Roomba you should press the clean button for three seconds.
However, there is something you need to know when you do that. It doesn’t turn off totally, as you can still use your remote to control the Roomba vacuum after pinging this.
A better alternative to double-checking that the battery is in no way draining is to remove the battery from the vacuum.
You can do that by replacing the battery compartment with plastic while taking the batteries out.
So, you can leave it docked in standby mode if you are going on vacation and do not want to remove the battery.
How to Turn Off the Roomba S9
Follow the steps below to turn off your Roomba vacuum;
- Keep the “CLEAN/POWER” button pressed until the Roomba switches off.
- When you turn off your Roomba, the lights on the vacuum will turn off, and all cleaning processes will stop to ensure your Roomba isn’t actively utilizing any electricity.
- To reactivate your Roomba, simply click the “CLEAN/POWER” button.
How to Turn off Roomba E5
If you are using a Roomba E5 model and you want to turn it off, all you have to do is press the power button for 3 seconds or until it turns off.
If it doesn’t turn off, another alternative is to remove the battery or put the Roomba in standby mode.
If you wish to put your Roomba vacuum in standby mode, follow these steps.
- Keep the “Spot Clean” button pressed.
It is always positioned adjacent to the huge “CLEAN/POWER” button, depending on the model of your Roomba.
- To put it in standby mode, just hold the button for 15 seconds until your Roomba emits a tone.
This tone signifies that it has been set to stand by.
When you place your Roomba in standby mode, all cleaning is suspended, but the device can still be charged.
How to Turn off Roomba i3
Since you own a Roomba i3 model, here is how you should turn off your Roomba vacuum cleaner.
- Press the “clean” button for 3 seconds or until it goes off.
- If it does not switch off, you can remove the battery or put the Roomba on standby mode.
Follow these instructions to put your Roomba vacuum in standby mode.
- Maintain your finger on the “Spot Clean” button.
- Depending on the model of your Roomba, it is always located next to the large “CLEAN/POWER” button.
- Simply hold the button for 15 seconds until your Roomba emits a tone to put it in standby mode.
This tone indicates that it has been placed on standby.
How to Turn Off the Roomba on a J7+
All you need to do to switch off a Roomba j7+ model is to push the clean button for three seconds or until it shuts off. If it still won’t switch off, you may also take the battery out or put the vacuum cleaner in standby mode.
That being said, follow these instructions to put your Roomba vacuum in standby mode.
- Hold down the “Spot Clean” button.
- Depending on the model of your Roomba, it is always placed next to the sizable “CLEAN/POWER” button.
- Simply hold the button down for 15 seconds until your Roomba makes a tone to enter standby mode.
- It has been placed on standby, as indicated by this tone.
How to Disconnect Roomba 675
If you own a Roomba 675 model, turning it off should not be a problem as it follows the same steps I have listed above.
But to be more explicit about this, I will break down how to turn off Roomba for the 675 models.
- If you’re here and want to turn it off, simply press the “clean” button.
- Press the clean button for 3 seconds or until it shuts off.
If it does not switch off, you can remove the battery or put the Roomba vacuum on standby mode.
- Put your Roomba vacuum in standby mode.
- Put your finger on the “Spot Clean” button.
- Depending on the model of your Roomba, it is always located next to the large “CLEAN/POWER” button.
- Simply hold the button for 15 seconds until your Roomba produces a tone to put it in standby mode.
- This tone indicates that it has been placed on standby.
Conclusion
By now, you should be well acquainted with how to turn off your Roomba vacuum and other alternative steps you should take if it is not turned off.
If this article has been helpful, please bookmark this site and share it with your friends to stay updated on the latest how-to fixes.