Roomba is another popular vacuum cleaner that automatically cleans your surrounding with the touch of a remote.
You don’t have to move around your home to hit dirty corners with the Roomba vacuum.
All you need to do is sit and control the vacuum till you are satisfied or till you encounter an issue such as the error code 8 issue, which we will be breaking down.
One of the things you ought to know before we begin delving into how you can resolve it is that most lithium batteries shouldn’t be left too long without a charge.
If you are going to be leaving it for a while, you need to charge it fully.
Now, when it comes to the Roomba error code 8, the main thing that causes it is the battery not charging.
Sometimes, it might be a result of a poor connection or an obstruction, but it usually comes into play when you leave your Roomba for a long period without charging it while it is low.
Apart from that, it could be caused by other issues related to the battery connection, but the former reason usually stands out.
Since you are here to figure out how to fix the Roomba charging error 8, let’s quickly break down all the possible reasons for this error before delving into how to fix it.
What is Roomba Charging Error 8
Roomba vacuum error 8 means that the robot is not charging even when it’s connected to the power source. If your battery is not the recommended battery for your Roomba the robot will come up with an error code, 8, denoting that the battery you inserted into the vacuum is not charging.
Why are you Stuck with the Roomba Charging Error 8?
When you come across this issue with your Roomba vacuum, it is on a model from the 500, 600, 700, or 800 series. You will hear a message saying “charging error 8.”
A model 900 will say the same thing but will go deeper by telling you to “opt for the iRobot Home Assistant.”
Since you are here to fix that, here are the reasons why it’s happening.
Recommended: Best Cheapest Vacuum Cleaner
Your Battery has been left Dead for too long.
As I previously mentioned, this is a typical reason. If you leave your Roomba at 0% for an extended period without charging it, or if the battery has reached the end of its shelf life,
If you’re unsure about the shelf life of your Roomba battery, here’s a quick calculation:
Roomba batteries have a lifespan of about two years, or 400 charging cycles. If yours has exceeded that limit, it is time to replace it. And when you want to replace the battery ensure that you get the authentic iRobot battery.
Recommended: How to program a Roomba vacuum cleaner
You are not using an Authentic iRobit-battery.
Perhaps you chose a subpar battery to save money, and the battery is non-OEM. You may be trapped by this type of error.
This is because Roomba has software that detects non-OEM batteries. So, if you use a non-OEM battery, It may result in a Roomba charging error.
Faulty Battery
A defective battery is one that has not reached the end of its lifespan but is not functioning properly. It could be caused by the manufacturer, electrical difficulties, or how the battery is operated.
Contact Points are Dirty
One of the things you’ll notice about your Roomba vacuum is that it has two battery connectors in the form of silver metal squares or strips.
Aside from a damaged battery, a wobbly, faulty, or rusted battery connection might cause the battery to not charge properly, resulting in a Roomba charging error code 8.
How to Fix the Roomba Charging Error 8
The Roomba charging system is very synonymous with all Roomba models; however, it seems more prevalent with the Roomba 600 series.
If you own any of these models, here are the proven troubleshooting steps you should take to resolve the Roomba
Ensure that you are using an authentic iRobot battery
If you have a cheap, non-OEM third-party battery and are stuck with the Roomba charging error 8, purchase a recommended Roomba iRobot battery for your vacuum.
Fitting a non-OEM battery on your Roomba will be simple to detect for the Roomba vacuum.
Check if the Roomba vacuum is charged at room temperature
One thing to keep an eye out for is changing your roommate’s vacuum in extreme temperatures.
If the Roomba vacuum is charged in a hot or cold environment, it may fail to charge, resulting in a Roomba charging error code 8.
Additionally, you should avoid charging it near a heating vent or related electronic device.
Clean the bin and unclog the filter
After trying the steps above, other things you can do when you are experiencing the Roomba charging error 8 are to clean and clear out the air filter.
Here is how you can do all that.
- The robot has a bin release indicator on its back. First, click the icon to remove the trash can.
- To empty the bin, press the bin door release button (often indicated by a bin icon).
- Clean the filter as well after emptying the trash can. The filter is often positioned on the left side of the bin.
- Pull out the filter by grasping it from either side.
- Now empty a garbage can of the dirt that clogged the filter.
- Place the filter back where it was.
- Finally, insert the bin into the slot and tighten it.
Charging Error 8 Roomba 675
The Roomba charging error 8 is very common in Roomba 600 models; however, that does not mean other models are free of it.
So if you are using this model, you don’t need to fret. All you have to do to resolve it is troubleshoot the vacuum by following the steps below.
A more extensive breakdown of these points has been given above.
Here are the steps you should take if you want to troubleshoot the Roomba charging error code 8.
- Check that you are using an authentic iRobot battery.
- Ensure that the Roomba vacuum is charged at room temperature.
- Clean the bin and unclog the filter.
Roomba 671 Charging Error 8
The Roomba charging error 8 is extremely common in Roomba 600 models, and if you want to repair it without replacing the model, read on.
What you have to do here is troubleshoot the vacuum by following the full instructions above.
However, I will go over some things you should do to troubleshoot the Roomba charging error 8 issues.
- Check that you are using an authentic iRobot battery.
- Ensure that the Roomba vacuum is charged at room temperature.
- Clean the bin and unclog the filter.
Roomba Charging Error 9
If you are experiencing Roomba charging error 9 troubles, this indicates that the Roomba series battery is not charging.
malfunctioning, In a scenario where your Roomba battery is not charging, there are several things to consider, such as the battery type, how powerful the battery is, whether or not the battery is malfunctioning and the battery configurations.
Roomba 890 Charging Error 8
You may be seeing a “charging 8 error if you own a Roomba 890 model since your battery isn’t charging.
There are three things you need to keep in mind if you find yourself in this situation.
It’s either…
- You have the incorrect battery in use.
- Your battery connection is broken, incorrectly connected, or otherwise flawed.
- You are charging your Roomba vacuum at an extremely high or low temperature.
- You are using a heater or radiator to charge your Roomba vacuum.
These are things you should think about if your roommate isn’t working.
NB: You can look up the instructions for carrying these above.
Roomba Filter Error
If you are facing a filter error with your Roomba vacuum, then you need to clean the bin and unclog the filter manually.
Here is how you should go about it:
- Remove the trash can by pressing the icon
- To empty the bin, press the bin door release button (typically denoted by a bin icon),
- Refresh the filter.
- Grab the filter from each side and pull it out.
- Now remove the dirt that clogged the filter and throw it in a trash receptacle.
- Reposition the filter where it was.
- The bin should then be inserted into the slot and tightened.
Conclusion
By now, you should be well aware of how to go about fixing your Roomba charging 8 error and what you should do to limit it from happening again.
If, after trying the above steps, you are still stuck with this issue, you should contact Roomaba customer support.