[Quick Fix]: How to Remove Blink Camera From Mount [2022]

Blink is an amazon owned home automation company with a series of impressive home security products. They have outdoor, indoor, and mini blink security camera which is all price friendly.

With the mini Blink camera starting at $17, It offers High-resolution video quality, 72000 seconds cloud storage, 30fps fps frame rate and it is compatible with Alexa.

All these make Blink a smart choice for your home security camera when compared to other security cameras.

If you have a Blink Camera and you want to mount it probably, you want to relocate to another house or maybe you simply want to insert batteries into the camera, but it seems hard to do in this article I will be showing you how to remove Blink camera from Mount

let’s proceed.

How to Remove Blink Camera From Mount [Outdoor camera]

Below are the steps you should take if you want to remove the Blink camera from its mount.

STEP 1: Get Closer to the Mount

It is recommended to install the Blink camera at a length of 8-10 inches from the ground. in most cases, you might need a stool or ladder to mount it. if you want to unmount it get closer to the Blink security camera by getting a stool or ladder to make the unmounting process easy.

STEP 2: Gently Pull the camera Away From Mount

While you’re an inch closer to the blinking camera, hold the camera mount firmly and use another hand to hold the bottom of the Blink camera, Now start pulling it carefully away from its mount. If it’s not pulling, you can apply some force.

How to Remove Blink Camera From Mount [indoor camera]

How to Remove Blink Camera From Mount

If you want to remove the back cover of your Blink indoor camera maybe you want to remove the batteries, here’s how you should do it.

NOTE: Firstly, you have to remove the camera from its mount. Follow the instructions above if you haven’t done that.

Things you need to be aware of

Now, before you remove the back cover of the Blink Camera here are a few things you need to be aware of.

  • There is a silicon disc covering the screw holding the back cover
  • You don’t necessarily need a screwdriver since there is an opening toll you can use to unscrew the camera back.
  • If you don’t know the direction to turn to tighten or unloose, check it on the plastic sticker
To remove the Back Cover:
  • Firstly you need to remove the silicon cover protecting the screw.
  • Get the opening tool and turn the screw Counter-clockwise until the screw loosens its grip.
  • Now, turn the opening tool around and clip the mounting end inside the back cover of the camera
  • Once, the mounting is secured, you should feel a click, 
  • Now, gently bend the opening tool till the camera back comes off. The back cover of the camera should detach as you are doing this. 

 since you’ve figured out How to Remove Blink Camera From Mount let’s delve into how you can remove the back cover of the blink outdoor camera

How to Remove the Back Cover of Blink Outdoor Cameras

How to Remove Blink Camera From Mount

Looking for how to remove the back cover of your Blink Outdoor camera

Here’s how you should do it.

Read Also: How to Share Blink Camera Access

Things you need to be aware of

Here are a few things you need to be aware of before you remove the back cover of the Blink Camera.

  • There is a silicon disc covering the screw holding the back cover
  • You don’t necessarily need a screwdriver since there is an opening toll you can use to unscrew the camera back.
  • If you don’t know the direction to turn to tighten or unloose, check it on the plastic sticker

To remove the Back Cover:

  • Firstly you need to remove the silicon cover protecting the screw.
  • Get the opening tool and turn the screw Counter-clockwise until the screw loosens its grip.
  • Now, turn the opening tool around and clip the mounting end inside the back cover of the camera
  • Once, the mounting is secured, you should feel a click, 
  • Now, gently bend the opening tool till the camera back comes off. The back cover of the camera should detach as you are doing this. 

How to Attach the Back Cover to Close the Camera

To close the camera after detaching the back cover, follow the steps below.

Get the cover and make sure it is aligned with the notches. Now cover without adjusting the alignment.

Get the opening tool or a screwdriver and tighten the screw. There should be no opening between the cover and the body after screwing it.

How to Secure Blink Camera

Your Blink camera is prone to Hacking, however, Blink has taken some steps to ensure that it’s safe to use and not easy to hack, there are different ways to hack your Blink camera either through credentials stuffing or Local hacking.

However, The blinking camera uses WPA2 Wi-Fi Encryption, to bring wireless hacking to the minimum.

Also another nice feature from the blinking camera that makes it harder for hackers is their video encryption integration that Blink uses to store your video files on the cloud.

That alone might be enough as security but here’s what you should do on your path to secure your Blink account from hackers  

1. Ensure that your firmware is updated at all times

Firmware is software that enhances IoT devices, and all software are prone to bugs or errors so its important to always keep your firmware up to date

2. Change your Login Details When you suspect anything Fishy

The majority of the hacker’s usually gain access to your account via your login details, if you feel uncomfortable with the strength of the password, change it.

3. Don’t use the same Credentials on other accounts

Lastly, avoid using similar login details on other accounts as they could be a target for hackers to break into other accounts you might own

Since you’ve been exposed on How to Remove Blink camera from Mount below are frequently asked questions from other Blink users

Can I view my blink camera away from home?

Yes, you can.

Both the blink indoor and outdoor camera can be added to your current Blink system. And you will be able to access the video from the Blink App, however, it requires some amount for subscription to access it from the cloud storage 

Why is my Blink blinking blue?

If your Blink camera is flashing a blue light then that means it is actively recording a clip. And this might not be a good idea. To turn off the blue light follow these steps.

  • Launch your blink app
  • Go to the camera settings section

Now, Choose any of these “ON” “OFF” or Recording” You can find that in the status LED section.

  • If you select “Recording” the blue light will be activated when the camera detects activity.
  • If you select “Off” all lights will go off regardless of activity.
  • If you select “On” the green light will be activated.

Blink camera won’t snap into the mount

If the camera isn’t snapping while mounting it, then you should remove it and try, mounting it vertically

Blink outdoor camera mounting ideas

While trying to figure out where to mount your Blink camera you have to ensure that there will be nothing covering the camera, and it shouldn’t be in a place of easy reach

Below are various places you can mount your Blink camera

  • On the tree branches
  • Under the roof
  • Inside a Fake Rock
  • Inside a Mailbox
  • On your front door
  • On top of the fence
  • Inside a flower case

Below are some ideas for indoor mounting

  • On your bookshelf
  • In the eye of a teddy bear
  • On the window
  • Behind a frame

Original blink camera mount

Since Blink is an amazon owned company you can get the original blink camera mount from Amazon.

Conclusion

Since you’ve been able to figure out how to remove Blink camera from mount, you’ll notice that it is an easy process, you just have to do make sure you are firm doing it to avoid any damages.

Do you know that ring permits more than one user to access a camera, but Blink does if you don’t know how to do that check here? 

Leave a Comment