You have been having difficulties using your ATT remote to control your TV, so you are now looking for how to reset your ATT remote, here is a guide for you. It would help if you read through this article, as we will explain what you can do to reset the AT & T remote.
AT&T is a well-known brand when it comes to manufacturing excellent products, and the remote is no exception.
However, the remote is still a device, and like every other device, it can experience glitches and perform in a less-than-optimal state, although this does not happen regularly with the AT&T remote.
On the rare occasion that you experience issues with the remote, you can usually fix it simply by performing a reset on the remote.
You can learn how to reset ATT remote by reading through the remaining section of this article.
How to Reset ATT remote
AT&T has various remote models, and you can expect them to perform exceptionally well with little to no issues. However, if you experience issues like being unable to pair the remote with your TV, you can always resolve the issue by resetting the remote.
You can reset ATT remote by following the steps below.
- Press down the AT&T and OK buttons on your remote simultaneously.
- Then release the buttons after a while, and you should see all four mode keys blink twice, signifying that you are in programming mode.
- Then depending on your AT&T remote model, you should enter its programming code, and the power button will flash for a long time, indicating that you have inputted the correct code and the remote has been reset to its factory settings.
The programming code for your AT&T remote, if you use the S10, Silver, and point anywhere model, is 900. While the programming code for S20 and S30 black remote is 981
Once you have been able to reset ATT remote successfully, you can pair the remote with your TV to confirm that the remote is working as expected.
You can also check out How To Reset Xfinity Remote.
How to Reset ATT Remote S30 -S1B
The AT&T S30 remote is the same as the S20 remote, with both of them having the same feature, except that the buttons on the S30 model are backlit.
It is not a remote you expect to constantly have issues with when you use them, but if you have any issues with it, you can reset the remote, as resetting it has been proven to be a fix that can resolve most issues affecting the remote.
You can reset ATT remote S30 model by following the instructions below.
- Press and simultaneously hold the AT & T and OK buttons on your remote.
- Then release the buttons after a while, and you should see all four mode keys blink twice, signifying that you are in programming mode.
- Then press 981 on the remote, which is the programming code for the S30 model, and you should see the power key flash for a long time, which is to let you know that you have been able to reset the remote.
Once the power key stops flashing, you can pair the remote to your TV and try to use the remote to control the TV to see if the remote is now functioning in an optimal state.
How to Reset ATT Stream Remote
If you are having issues with your AT&T stream remote and you are unable to use it to navigate your TV, the best approach to resolving the issue is to reset the remote.
You can reset your AT&T stream remote by following the steps below.
- Press either the – dash, diamond, or apps button till the LED light blinks twice.
- Then either press the red button at the side of your AT&T TV to restart it or unplug the AT&T TV device from its power source and plug it back to turn it on and off.
You can then use your AT&T stream remote with your AT&T TV to confirm that the remote is now working as expected.
How to Reset ATT TV Remote RC82V
The AT&T remote should work well with the AT&T remote, and if you have occasions when it is not, the solution is usually to reset the remote.
You can reset ATT remote RC82V by following the steps below.
- Press and hold the – dash, diamond, or apps button until the LED light blinks twice.
- Then press the red button at the side of your AT & T TV to restart it or unplug the AT&T TV device from its power outlet and plug it back to switch it on and off.
Once your TV is turned on, you can attempt to use the remote to perform any function on the TV, and if it works as expected, it means that you have been able to reset the remote successfully.
How to Resolve AT&T TV Remote not Working
The AT&T TV remote is essential to the AT&T TV as it is only the remote that can be used to perform certain functions on the TV, and when it is not working, it becomes pretty challenging to navigate through the TV.
If your AT&T TV remote is not working, the known solution will be to reset the remote, and you can achieve this by following the instructions below.
- Press and hold the – dash, apps, or diamond button on the remote until the LED light blinks twice.
- Then press the red button at the side of your AT & T TV to restart it or remove the AT&T TV power cable from its power source and plug it back after a couple of seconds to turn it on and off.
After following the instructions above, you can use the remote to switch channels or perform any other operation on the TV to confirm that the remote is now functioning as expected.
What is the AT&T Uverse Remote
The At&T Uverse remote is the remote that accompanies the AT&T Uverse. It has an adjustable design for ease of operation and has one-button access that allows you conveniently navigate to some of your most used features.
Some remote models, like the S30, are backlit, allowing for easy navigation while in the dark.
Why is My Uverse Remote Blinking Red
If your UVerse remote is flashing red, the possible reason for this occurrence is that the batteries in the remote are low and can no longer power the remote.
You can take out the batteries, and if they are already weak, you should replace the batteries, and that should stop the remote from blinking red every time you press a button on it.
Conclusion:
This article has explained how to reset AT&T remote and looked specifically at some models of the AT&T remote and how you can reset them.