How to Program RCA Universal Remote Control

RCA is one of the most well-known brands of universal remote controls for different kinds of appliances. We will take you through easy steps on how to program your RCA Universal Remote Control.

Using an RCA universal remote control makes it easier to manage all of your cable set-top boxes, DVD/ Blu-Ray components, streaming players, and more.

So, if you believe you are stressed out of having to search around for a separate remote control whenever you want to change the channel or when you wish to adjust the volume or even when you desire to control a set-top box, you should read this how-to guide in the end as an RCA Universal remote provides the all-rounder effect in allowing you control your entire home theatre setup from just one click.

The initiative behind this is laced in the fact that you do not have to store a bunch of remotes together or even lose them. With the RCA universal remote control, you can manage about eight devices.

What is important, though, is that you need to program your RCA universal remote control to get the best experience. Patience is the ultimate ingredient here. This is because you are likely to spend a lot of time working your remote control to shape.

We have also provided you with steps if what you need to program your remote control and how you can program it. For starters, you will need your RCA universal remote control, and new batteries to work your remote control.

Easy Steps to Program your RCA Universal Remote Control

Read these six easy steps to program your RCA universal remote control;

Step 1: First, switch on your TV.

Step 2: Using your remote, aim for the TV panel, and hold down the TV button.

Step 3: As soon as the light is turned on, press and hold the On/Off button. The light will turn on again.

Step 4: Next, hit the Play button or press and hold the Slow button on your remote for up to five seconds.

Step 5: At this stage, we expect that your TV will be turned off after you have passed step 4.

Step 6: The TV going off means that you are working in the right way.

Step 7: If this (TV going off) does not happen, perform the process again.

Step 8: Do this at an interval of five seconds until you see a positive change.

Remember, we did emphasize the importance of patience when it comes to programming your RCA Universal Remote control. Repeat these steps until you no longer have to.

How to Program an RCA Universal Remote for other Devices

You can also program RCA universal remote for your other devices. First, make sure that your universal remote has an option for programming to other devices.

Step 1: Turn on the device you desire to set up. Ensure that your RCA universal remote is pointed towards such a device.

Step 2: Hit and then hold down the button that goes with the device you want to pair. The light on the remote must blink before you go on with the next step.

Step 3: Press down the device button concurrently with the  Power button, up until the light turns off and on.  This also should take about five seconds.

Step 4: Let go off the Power button and the device button. Ensure that the Power button light is on (it must stay on) or repeat the previous steps until it comes on.

Step 5: Next,  use your remote’s power button to scan the code you need to set up your device. If the component turns off, it only means that the control sorted the code so you can pair it with your device.

Step 6: Next, hit the Stop button. This will save the code for the device. All functions must work, so it will also check for this. If this does not happen, stick to patience and try again. It is certainly worth it!

By now, we hope that you would have been lucky enough to get all of this once. The next step will then involve you relishing a wonderful experience with the RCA universal remote control.

You can get your RCA Universal remote in any place where basic electronics are purchased. It could be Amazon, or it could be Walmart. You can check out drugstores as well. Price is also an interesting factor, and you could find RCA universal remotes that are nice to you and even nicer to your pockets. Still talking remotes, why not check out these Universal remote apps.

If you have other tips or you encountered some problems on how to program RCA universal remote control, you can tell us about your experience using this remote control in the comment section below.

Leave a Comment