Samsung fridge water filter reset should be done every 6 months as recommended. Your Samsung refrigerator would illuminate an orange light after 5 months’ signalling that it’s time to reset your Samsung fridge water filter.
Whenever your Samsung fridge water filter indicator light on your Samsung refrigerator displays a red light. This means it is due for service and therefore it should be replaced. But the water filter should be replaced every 6 months.
Replacing your Samsung water filter depends on the model of your Samsung refrigerator. There are three types of Samsung water filters and choosing the correct type of filter is essential for the smooth running of your Samsung fridge.
If you are not sure of your Samsung fridge model, ensure you check your user manual. To make sure you buy the correct filter, check the model number of your Samsung refrigerator on the filter.
Recommended: Samsung Fridge Filter Reset Indicator Light
How To Change Samsung Water Filter
The indicator light will start displaying a red light after 6 months, this is an indication that the water filter should be replaced. We would now take a look at how to replace the 3 types of water filters.
To replace the HAF-CIN and HAF-QIN filter types, follow these steps:
- Disconnect the power supply to your Samsung refrigerator.
Turn off the water supply - Locate water filter. You can consult your user manual if you are unsure of its location.
- Open the water filter cover.
- Rotate the water filter counterclockwise, to unlock it.
- Pull the water filter out to remove it from the filter housing.
To install the new water filter
- Remove the protection cap from the top of the filter.
- Push the new water filter straight into the filter housing
- Now turn it clockwise and ensure the lock symbol matches up with the indicator line.
To replace the HAFCU1 filter types, follow these steps :
- Turn off the power supply to your Samsung refrigerator.
- Turn off the water supply.
- Locate the water filter. You can consult your user manual if you are unsure of the water filter location.
- Twist the water filter to the left to remove and unlock it.
- Pull the water filter to remove it from the filter housing.
To insert the new filter
- Push it into the filter housing.
- Then turn it to the right.
- Ensure the lock sign at the top of the filter, matches with the arrow on the filter housing.
Samsung Fridge Water Filter Reset
You are recommended to replace the water filter in your Samsung refrigerator every 6 months so you can keep getting clean, fresh, and filtered water. You need to regularly keep an eye on the water filter indicator light of your Samsung refrigerator, so you would know when to replace your water filter. After you replace the water filter of your Samsung refrigerator, ensure you reset the filter.
The water filter indicator light in the Samsung fridge displays either in green or blue colour. The water filter indicator light will turn orange after 5 months or when you have dispensed 450 gallons of water. The water filter indicator light will turn red after the filter has been used for 6 months or when you have dispensed 500 gallons of water.
To reset the water filter indicator light, locate the multi-function button on your Samsung refrigerator display that controls the filter indicator. Now Press and hold the filter reset button until the light changes.
How Do You Reset The Water Filter Light On a Samsung Refrigerator
After you have replaced the water filter, dispense water out of your refrigerator to flush out any impurities or air within the system. Then, you need to reset the water filter light on your Samsung fridge.
Ensure you follow these steps to reset the water filter light, on your Samsung fridge:
- Locate the filter reset button on the control panel of your Samsung refrigerator.
- Press and hold the filter reset button for 3 seconds until the red light changes or off.
- Depending on the model of your Samsung refrigerator, the filter light will turn off or change back to its normal colour.
Samsung Water Filter DA29-00020B
The DA29-00020B water filter is manufactured by Pureline, it is simple and easy to install. It is designed to be compatible with Samsung French Door, Samsung Side-by-Side Refrigerators, and other Samsung refrigerators that use this water filter. The DA29-00020B water filter reduces contaminants such as chlorine, impurities, and asbestos while also serving the cleanest tasting water.
Samsung RF23J9011SR Water Filter Reset
You’d have to do the Samsung fridge water filter reset if you own a Samsung refrigerator with an RF23J9011SR water filter. You can reset the Samsung RF23J9011SR filter by holding down the “Crushed/Hold” button and the “Normal Dispense” button together for 3 seconds.
Samsung SRF719DLS Filter Light Reset
If you are using a Samsung SRF719DLS filter model you can execute the Samsung fridge water filter reset by touching the CRUSHED/HOLD button for 3 seconds will turn off the water filter light.
Samsung Refrigerator Filter Reset RF28R7201SR
If the model of your Samsung refrigerator filter is RF28R7201SR you can perform the steps below to reset the filter when the indicator prompted you to do that.
- Press the ICEMAKER icon and hold it for 3 seconds. That will clear the filter reminder light.
Samsung RF23J9011SR Water Filter Reset
If you own a Samsung refrigerator with an RF23J9011SR water filter, after replacing your water filter, you can follow these steps to reset your Samsung RF23J9011SR water filter. Press and hold the button “CRUSHED/HOLD” for three seconds to reset the water filter alarm.
How Do You Reset The Water Filter Light On a Samsung Refrigerator
On the Samsung fridge water filter, you can easily reset the red indicator light on your Samsung refrigerator, but this will solely depend on the type of Samsung refrigerator that you have.
To do this just perform the task below:
- Simply press and hold the “Alarm/Hold” button or “Energy Saver” button for 3 seconds to reset the water filter.
- This depends on the type of Samsung refrigerator that you have.
- If your Samsung refrigerator model doesn’t have these buttons; press and hold the “Water” button for 3 seconds for the water filter to reset.
How Do You Reset The Water Filter On a Samsung Fridge Freezer
It’s quite simple to do. Follow the steps below to reset the water filter on your Samsung fridge freeze.
- Press and hold the Ice Type or Filter Change button for 3 seconds.
If you don’t want to use the water filter anymore, do this instead:
- Press and hold the Ice Type button for at least 5 seconds, and the Filter Indicator and the Filter Change display will switch off.
Ensure you change the water filter after 6 months to keep serving you with a clean and good water supply. If you have turned off the indicator light on your Samsung refrigerator take notice of unusual material or sediment in your water supply.
And you will derive unusual tastes or smells. These signs indicate that you should change the water filter in your Samsung refrigerator.
Why Won’t My Filter Light Reset On My Samsung Refrigerator
If the water filter is not correctly installed, your Samsung fridge water filter reset won’t turn off. Ensure you properly install your water filter, follow these steps on Samsung water filter reset :
If you have an externally filtered smart Samsung fridge:
- Turn off the water supply.
- Connect the water supply line to the inlet side of the filter.
- Connect the dispenser line to the outlet side of the filter.
- Check for leakages.
- Put the water filter into place and fix it with the clips.
- To reset the filter lifecycle, Press and hold Filter Reset on your Samsung display for 3 seconds.
- After replacing the filter, dispense the water for about 6 to 7 minutes, to completely remove air from the water line.
If you have an Internally fitted water filter:
- Shut off the water supply.
- Then open the filter cartridge cover.
- Unlock the filter cartridge by turning the knob clockwise at 90 degrees.
- Now pull firmly to remove the filter.
- Insert a new water filter.
- Turn the cartridge knob clockwise to lock it into place.
- Close the filter cartridge cover.
- To reset the water filter indicator light on the control panel. Go to more options, and then run filter reset or press and hold the filter reset button for about 3 seconds.
- Ensure you flush 10 litres of water or dispense the water for about 6 – 7 minutes. to remove air from the water line.