- Advertisement -

How to Change Boundary in Oculus Quest 2

Have you been thinking about how to change boundary in Oculus Quest 2? Perhaps you want to extend your play area, or you want to change boundary mode completely, then you are reading the right article, as we will teach you all about how to change your boundary in Oculus quest 2.

The Oculus quest 2 virtual reality device is equipped with built-in sensors that can be used to turn any room into a virtual reality environment.

It also has a guardian system that allows you to designate the VR space’s boundary in the room or area you want to utilize. When you come too close to your play area, the limits will usually appear to warn you.

The guardian system has two modes you can choose from the roomscale mode and the stationary mode.

The stationary mode creates 3 feet by 3 feet default guardian boundary centred on you. The stationary mode is typically used when you’re sitting or standing in a certain location using your Oculus quest 2 headset.

The roomscale mode is a flexible mode that allows you to define the boundary of the guardian system in your physical environment, and it is only required that you have a minimum of 6.5 feet by 6.5 feet of unconstrained space as your boundary area.

- ADVERTISEMENT -

The roomscale mode is typically used when you intend to move around in your play area. You can easily change boundaries in Oculus quest 2, from one mode to another, and the next section of this article will explain how to change boundary in Oculus quest 2.

How to Change Boundary in Oculus Quest 2

You can change boundary in Oculus quest 2, changing from one mode to another as you deem fit.

Follow the instruction given below to change boundary in Oculus quest 2.

  • Select the home icon on your right touch controller to bring up the universal menu.
  • Hover on the clock on the left-hand side of the universal menu, and click on quick settings once it appears to open the quick settings panel.
  • From the quick settings panel menu, select guardian.
  • Select your preferred boundary mode by clicking on the roomscale or stationary option.
  • Having selected your preferred boundary mode, you can follow the prompts that will appear on your screen to complete the setup.

If you have followed the instruction given above, then you have been able to change boundary in Oculus quest 2 to your preferred boundary mode.

Always remember that you need a minimum of 6.5 feet by 6.5 feet of unobstructed space to use the roomscale boundary mode.

You can also learn more about How to Switch Admin Account on Oculus Quest 2

- ADVERTISEMENT -

Replace Oculus Accessories

You can replace your Oculus accessories following the link below with at least a 25% discount

How to Set Stationary Boundary Oculus Quest

The stationary boundary mode is used when you are sure of no movement within the play area while using the Oculus quest or Oculus quest 2.

- ADVERTISEMENT -

You can set stationary boundary mode on Oculus quest or Oculus quest 2 by following the instructions below.

  • Access the universal menu by pressing the home icon on your right touch controller.
  • Then go to the quick settings panel by hovering on the clock on the left side of the universal menu and clicking on the quick menu option when it appears on the screen.
  • Then select guardian from the quick menu panel.
  • Then select stationery from the guardian boundary mode options.
  • Finally, follow the instructions that will appear on your screen to complete the process.

If you have followed the steps given above, then you have been able to change boundary on Oculus quest 2 to the stationary boundary mode.

How to Set Roomscale Boundary in Oculus Quest

The roomscale boundary is used when you intend on moving around the play area when using either the Oculus quest or the Oculus quest 2 headsets.

You can set roomscale boundaries in oculus quest or Oculus quest 2 by following the instructions below.

  • Press the home icon on your right controller to access the universal menu.
  • Then hover on the clock icon and select quick setting when it appears to open the quick settings panel.
  • From the quick settings menu, you should select guardian.
  • Then from the guardian boundary mode options, select roomscale and follow the instructions that will appear on your screen to complete the setup.

If you have followed the instructions given above, then you have been able to set roomscale boundary in Oculus quest or Oculus quest 2.

How to Reset Boundary Sensitivity on Oculus Quest 2

You can adjust the boundary sensitivity of your Oculus quest 2 by following the steps given below.

- ADVERTISEMENT -
  • Access the universal menu by pressing the home icon on your right touch controller.
  • Then navigate to the quick settings panel by hovering on the clock on the left menu and selecting quick settings.
  • Then select guardian from the quick settings menu.
  • Then click on boundary sensitivity and select guardian sensitivity.
  • Then adjust the boundary sensitivity to your preferred setting.

If you have followed the instruction given above, then you have been able to reset boundary sensitivity on Oculus quest 2.

How to Change Guardian Boundary Color on Oculus Quest 2

The guardian boundary color is used to help you see clearly your defined play area and boundary borders.

It alerts you whenever you move too close to the boundary area, and it is usually recommended that your boundary color should be in sharp contrast to your immediate physical environment so you can see it clearly.

It has four different colors, namely red, blue, yellow, and purple. The red is usually used to alert you whenever you get dangerously close to the boundary area, while the default colors can either be blue, yellow, or purple.

You can change the guardian boundary color on Oculus quest 2 by following the instructions given below.

  • Press the home icon on your Oculus right controller to bring up the universal menu.
  • Then hover on the left side of the menu to open the quick settings panel by selecting quick settings.
  • Then from the quick settings menu, select guardians.
  • From the guardian menu list, select boundary color.
  • Then from the drop-down menu, select either blue, yellow, or purple as your default boundary color.

If you have followed the instructions above, then you have been able to change your Oculus boundary color.

Always remember to choose a color that is in sharp contrast to your immediate physical environment.

change guardian boundary color in Oculus

Conclusion:

This article has discussed how to change boundary in Oculus quest 2. We also discussed how to set either the stationary or roomscale boundary in Oculus quest 2.

Finally, we discussed resetting boundary sensitivity and changing guardian boundary color.

Related Posts

Leave a Comment