- Advertisement -

How do I Change my 4 Digit Schlage Lock Code

If you are using a Schlage lock, you most likely value the security it offers, just anyone can’t just barge into our house without having the four-digit code for the lock. You can decide to have a different code for different members of the house, for example for a locksmith that comes for repairs when you are not home.

What if you suddenly can’t remember the Schlage 4 digit code for your lock, or maybe you’ve just moved into a new house that comes preinstalled with a Schlage lock how do you go about that?

Since you’re here asking yourself the question about how to change my 4 digit lock code, therefore, in this article, you will understand “how do I change my 4 digit Schlage lock code” and other measures that are required to change a Schlage lock code.

NOTE: Before you begin the process of changing the four-digit Schlage lock code, it is a good practice to write down the Schlage lock code somewhere for later reference and also make sure the power to the lock is OFF.

How do I Change my 4 Digit Schlage Lock Code?

We explain in detail below the steps to take to change your 4 digit Schlage lock code without breaking your door or without the assistance of a blacksmith.

  • Get the Schlage lock programming code
  • Enter the gotten programming code
  • Create a new Schlage lock code.
  • Re-enter your Schlage lock code

How do I Change my 4 Digit Schlage Lock Code

Read Also: How to Fix Schlage Lock not Working

Get the Schlage Lock Programming Code

The first thing you have to do is to look for the six-digit programming code for that specific lock.

As long As the Programming code hasn’t been changed you can always find it on the instruction manual. its usually at the backside of the deadbolt

Enter the Programming Code

Now that you have the programming code, simply proceed to dial it on the Schlage lock. If the correct programming code is entered, the Schlage key will blink three times and the key will stay lighted

Create a New code

Below are the steps to take to create a new Schlage code.

  • Press the Schlage button together with the number “1” to add/change the Schlage.
  • Wait for the Schlage button to ring and blink three times.
  • Once, it has done that, proceeds to enter the 4 digit code until the Schlage button flash and bleep three times again.

Re-Enter The Code Again

After entering the 4 digit code you want to change, you will need to re-enter it again for confirmation, and to do that, wait for the button to beep and flash after entering the four-digit code at first, now enter the 4 digit code one more time, so that the lock registers the input.

Now, you can go ahead and start using this new code. 

Moving on, since, you’ve figured out the question: how do I change my 4 digit Schlage lock code, what if you want to add another lock code, how do you do that.

Read Also: Fix Schlage Lock not Working after Battery Change

How to Add Another 4 Digit Schlage Lock code

Since Schlage permit up to 19 users’ code, you can add more than 1 4 digit lock code to your Schlage lock add more, here’s how to do that:

Enter Your Current programming Code

To add another user ode, you need to first enter your six-digit programming code and then wait till you see 3 orange lights from the Schlage button with 3 beeps from the door.

Press the Schlage Button and Press 1

After noticing the 3 bleeps from the lock, proceed to press the Schlage button and then press 1 simultaneously until the orange light blinks three times and the lock beep thrice also.

Enter The 4 Digit Code

Now, Enter the 4 digit code you want to add to the Schlage lock and wait till you see an orange light blinking three times and you hear a beep three times also.

Re-Enter The 4 Digit Code

Moving on re-enter the four-digit lock code to confirm and register it so that the process will;l be complete.

Once you see a Greenlight and then you hear one long beep. This means it has been successfully added to the Schlage lock, deleting the default four-digit code.

Moving on, what if you want to delete or remove a 4 digit lock code, how do you achieve that?

How to remove the 4 digit code on a Schlage Lock

You can remove unwanted Schlage lock codes and authorized users from using your Schlage smart lock. Therefore, below are the steps to take to remove the Schlage 4-digit code of a particular user.

As usual, you always need the programming code before you can perform any adjustment to your Schlage lock and below I will be delving into how you can change it in the next heading after we’ve discussed deleting it but for now, here is how to remove the 4 digit Schlage lock code.

Enter the Programming Code

You can always see the six-digit programming code on the installation manual or a yellow label at the back of your lock. Now, dial in your six digit p[rogramming ocd eon the schlage lock.

Press the Schlage Button and Press 2

After entering th eprogamming code, press th eschalge butto togtehre with th enumber two on your schlage lock. after the Schlage button will beep and flash three times. Doing this will put your Schlage lock in a state to remove a code.

Enter the Code You want to remove

Movin gon, Proceed to enter the fours digit Schlage code, you want to remove. after doing this the Schlage button will flash thrice and beep thrice too.

Re-Enter the code you want to remove

Now, enter the same four-digit code, you entered previously for confirmation. after doing this, the Schlage button will give a long beep and flash green. confirming that the code has been successfully removed.

Since you’ve figured out the answer to the question: How do I change my 4 digit lock code on Schlage, and you know how to remove a particular lock code, let us proceed to how to remove all stored 4 digit Schlage lock code

How to Delete all Schlage Smart Door Lock code

Since Schlage offers the power to store 19 Schlage 4 digit lock codes. Here is how you can delete all stored lock codes on your Schlage device all at once.

  • Enter your programming code and wait for both the Schlage button to blink thrice and for the lock to beep three too.
  • Now, Press the Schlage button on the keypad and then press 6, while waiting a 3 blinks and three beeps.
  • After the beeps and blinks, enter the programming code again to delete all the code.
  • Doing this will make the exchange button show a green light and then give along bleep.

Also, do you know you can change the programming code, its advisable to store this somewhere in written while changing it?

The steps outline to change your Schlage 6 digit programming code.

Read Also: Fixed: Schlage Lock Not Working

How to change Schlage lock Preset Programming code

The preset programming code which can be found at the back of the keypad is required to add or delete user codes or activate vacation modes

To change the preset programming code follow the steps below.

Dial-in the Programming Code

The first thing you have to do here is to enter the programming code and then wait for the Schlage button to flash an orange light and bleep thrice.

Press The Schlage Button and Press 3

The next after noticing both the blinking orange light and the beep is to press the Schlage button together with “3”

Enter your new programming code 

Now, enter the new programming code you want to change the preset one to, make sure it’s also 6 digits, not four. then wait for three orange light flashes and three beeps.

Re-Enter your Programming Code

Now, enter the new programming code once again to simply register it as the new programming code.. after doing this you should notice a green light and one long beep

Note: you can use these same steps to change a programming code you’ve previously adjusted.

Since you’ve figured out the question: how do I change my 4 digit lock code, below are commonly asked questions regarding this topic.

How to Change Code on Schlage lock without programming code

If you are faced with a scenario where you can’t remember your programming code, maybe you have changed it from the preset code. Then You should factory reset the lock, and to do that, here’s how.

  1. Open your door to avoid being locked out.
  2. Remove the battery cover and disconnect the battery.
  3. Now, press the Schlage button and then release it.
  4. Finally, connect the battery again and then press and hold the Schlage button till you notice a green light and one long beep.

NB: Make sure you do all these within 10 seconds.

How to Change Code on Schlage Camelot Lock

Changing the codes on your Schlage Camelot door lock follows the same process as other Schlage door locks which is to 

  • Get the Programming Code
  • Enter the Programming Code
  • Press the Schlage Button and Press 1
  • Enter The 4 Digit Code
  • Re-Enter The 4 Digit Code

How to Reprogram Schlage Lock

To reprogram the Schlage lock follow the steps below.

  • Firstly, remove the batteries.
  • Next, long-press the Schlage button till you connect the batteries back.
  • Now, release your hands from the button 
  • Finally, to confirm that the lock has been reset, press the Outside Schlage Button and enter a Default User.

Conclusion:

YOu can now easily change your Schlage lock 4 digit lock code by following the instructions above, however, you should make it a practice of storing the programming code anytime you adjust it, to prevent the occurrence of having to factory reset it again.

Related Posts

Leave a Comment