[Fixed]: How to Reset Ring Floodlight Camera [2022]

There are a series of issues that occurs making a ring floodlight camera reset almost inevitable, issues such as your ring floodlight not turning OFF, or your ring floodlight going offline after a power outage and it isn’t reconnecting or maybe the ring floodlight devices keep turning ON and OFF at irregular internal, Now, if you are faced with any of these, then you might need to carry out a factory reset it. 

Factory resetting your ring floodlight device should be a last resort because, once you carry out a factory reset, all your saved settings or preferences will be deleted, and you might not be ready to deal with that.

Instead, you can simply try Rebooting, power cycling, checking the batteries, updating the app, reinstalling another version of firmware before looking for a way on how to reset ring floodlight camera.

In this article below, I will be breaking down the steps you should follow on how to reset ring floodlight camera, but before we go straight into that, let’s figure out the problems that make resetting your device inevitable.

Issues that Requires a Ring Floodlight Reset

There are a series of reasons why you might have to factory reset your ring floodlight camera. Below I will be touching on that and some preventive tips to reduce these issues while using your Ring cam floodlight device.

Outdated Software/Firmware

Your software can be affected with bug, or maybe a recently released firmware version is unstable, or even maybe there is a sudden change in which device is supported and which isn’t when it comes to the app version all these coupled with the fact that the security camera can be hacked makes software one of the most recurring issues with the ring floodlight device.

However, its ring product is not error-prone as compared to Wyze, they rarely have errors but when they do you might end up resetting the device to resolve the underlying issues.

Battery – Low battery fake batteries

If you are using a ring floodlight battery-powered device, you need to be aware of the fact that it comes with a battery life of 12 months. But that is not all, it could be way lower than that, if you stay in an area with a high activity which in turn increases the usage of the battery, or if the temperature around where you stay s usually less than 40°F

The battery usage coupled with the weather is enough to drastically reduce the battery life of your ring floodlight camera, so if you have a battery power ring floodlight camera it’s a safe practice to always turn off your ring security camera anything you are not using it.

You can learn more on how to do that over here 

Hardware issues

Hardware issues are not always at the top of the list when it comes to issues that usually end up requiring a hard reset but it doesn’t mean it can’t result in needing a factory reset.

When you are initially faced with a problem on any electronic device. especially devices that are powered with wires, it is very important to check the physical connection to verify that nothing is wrong before progressing further to the software-related issues.

How to Reset Ring Floodlight Wired

Looking for How to reset Ring floodlight camera? if yes follow the steps below.

  • Powe on your ring camera
  • Press and hold the reset button for 30 seconds
  • Release the reset button once it flashes the status light.

For details on how to reset your ring floodlight camera from the summary above, follow the steps below.

Ensure the Ring Floodlight Camera is Powered Up

How to Reset Ring Floodlight Camera bbdHow to Reset Ring Floodlight Camera bbd

The ring floodlight needs to be powered before you can begin resetting it. To power it up, you have to connect it to a power supply before you proceed with the next step.

Press and Hold the Ring Floodlight Camera Reset Button

How to Reset Ring Floodlight Camera

Once, the ring floodlight is either powered up, look at the top of the device and locate the “reset button”. once you see it, it presses and holds the button for 30 seconds at minimum

Now Release your Hands from the Button

How to Reset Ring Floodlight Camera

After holding it down for exactly 30 seconds, release your hands from the reset button and look at the status light to see if there is any flashing. IF the status light doesn’t flash then you have to repeat the previous step above but if it does flash for some time, it means the Device is restarting.

After doing all these the ring floodlight camera will be restored to its factory settings and you can now begin to set it up again using the Ring app, now if you are using a ring floodlight battery-powered device follow the steps below to reset it

How to Reset Ring Floodlight [Battery]

To reset your Ring Floodlight cam battery follow these steps below.

  • Turn on your ring floodlight camera.
  • Press down the reset button.
  • Release the reset button after 30 seconds.

For more detail on how to reset your ring floodlight battery read through the steps below.

Ensure the camera is powered up.

How to Reset Ring Floodlight Camera

The ring floodlight camera needs to be charged before you begin to reset it. simply connect it to a power outlet if it is very low.

Long press the reset Button

Once, the ring floodlight is charged, look at the top of the device and locate the “reset button”. once you see it, it presses and holds the button for 30 seconds at minimum

Now Release your Hands from the Button

After holding it down for exactly 30 seconds, release your hands from the reset button and look at the status light to see if there is any flashing. IF the status light doesn’t flash then you have to repeat the previous step above but if it does flash for some time, it means the Device is restarting.

since, you’ve been able to figure out how to Reset Ring Floodlight camera let’s proceed to maintenance tips for the ring floodlight device

Maintenance Tips for your Ring Floodlight camera

The Ring Floodlight security cam has been an impressive electronic device that doesn’t make it prone to errors however, here are some preventive tips to make your ring floodlight device last longer

Always Turn off the Ring Floodlight device, when it’s not necessarily been used.

Ensure that your battery is always charged when required. Anytime the weather is less than 40 degrees Fahrenheit, make sure you are charging the batteries more often.

Moderately increasing the motion sensitivity, increasing it to the height too frequently could result in the floodlight running on and off regularly.

Always check for updates to the firmware or the ring app and make sure you are using the latest version. You can schedule the updates to times when your ring alarm is removed

Now that you are fully aware of how to Reset Ring Floodlight camera below are commonly asked questions regarding the topic

Ring floodlight Cam Hard Reset not working

This scenario is common if the device is owned by another account. if you tried performing a hard reset and it not working and the device was transferred to you maybe via an apartment you just got or a friend gave it to you, then you have to inform the initial owner and tell him/her to unregister the ownership

If you can’t contact the owner, you can send an email to this ring floodlight camera team with any documentation proving ownership of the security cam device.

After doing this, they will help you contact the current owner to unregister themselves from the device. At worst the process should take less than a month.

Ring Floodlight Cam Troubleshooting

Apart from heard resetting your ring floodlight camera other troubleshooting steps you can try out are, checking the batteries, reducing the motion sensitivity, updating the firmware and rebooting the device.

Reset Ring Camera Wifi

To change your ring floodlight wifi network follow these steps below.

NOTE: If the floodlight camera is mounted somewhere remove it from the mounting before you proceed with these steps

  • Launch your ring app
  • Now, choose the device you want to reset.
  • tap on device health
  • Next, tap on “Change wifi network” and choose the new network you want to replace with
  • Lastly, now press the orange button at the doorbell back.

Ring Floodlight won’t go into Setup Mode

If you are faced with a scenario where your ring floodlight device isn’t going into setup mode, try doing a hard reset by long pressing the setup button for at least 30 seconds and then release it.

If the setup isn’t responding after doing that power cycle the device

Restart ring Camera from the App

There is no way you can reboot via the app unless you have a smart plug installed together with the ring floodlight camera (wired).

You can learn more about how to set up smart plugs here.

Ring floodlight cam not connecting to wifi

If you are experiencing these issues there are two things you need to check first the firmware, version you are using then also verify that you are connected to a 2.4GHz frequency.

Ring floodlight flashing

If your ring floodlight camera is flashing, maybe it is going Off and On constantly, then the first thing you should check is the battery to ensure that it isn’t low, also you should try adjusting the light sensitivity and lastly, try updating your firmware version if you come across this issues

Conclusion

Since you’ve figured out how to reset ring floodlight security camera, for both the battery-powered and wired versions, resetting other ring cameras shouldn’t be an issue since they follow a very similar process.

In addition, make sure you regularly carry out some maintenance practices to the device such as constantly updating both the app and firmware and making sure the batteries are always changed.

Leave a Comment