When you come across a Roomba charging error 5, it isn’t always a good experience.
You may have tried cleaning the transistor, replacing the battery, and even resetting the battery several times, but you still can’t figure out what’s wrong.
If this is you, you are not alone. Maybe you got the roomba from eBay or you bought it new, and you’ve used it for a while before you come across the roomba charging error 5.
Either way, the steps you’ll take to resolve it are similar; you just have to try everything I’ll be talking about below before you find the one that works for you.
That being said, let’s take a quick look at why you’re experiencing Roomba charging error 5 and what you can do about it.
Recommended: How to fix Romba error code 8
What is Roomba Charging Error 5?
If you encounter a Roomba charging error code 5, it signifies that something is wrong with your Roomba charging system.
What this means is that Roomba is informing you that it has no clue what the problem is and that you must solve it.
Since this is the case, the problem might be with the charging station (Home Base), the charging plates on the Roomba, or the battery, and you have to figure that out.
Why you are stuck with the Roomba charging error 5
This error code might seem strange to deal with. However, if you are stuck with it, you should be aware that one of these listed below is the culprit for your Roomba cleaner.
- Accumulation of carbon or dust on the charging connectors for the Roomba, battery, and dock.
- The Roomba battery is defective or totally depleted.
- The battery’s yellow tab is either left on or not properly removed.
- The power cord has been damaged.
- The dock for charging is broken.
- A bad motherboard in the Roomba
- Malfunctioning software
Now, let’s look at how you can resolve these issues with your robot vacuum cleaner.
How to Repair the Roomba Charging Error 5 QUICKLY!
“Roomba charging error 5” is not a simple report of what is wrong with your vacuum cleaner because you can’t pinpoint exactly what to do next.
However, you don’t need to fret about it, as I have curated all the proven steps you can take to resolve it.
Firstly.
Clean the dock and the Roomba charging terminals.
When the dock and Roomba charging plates were cleaned, several consumers said, the charging process stopped.
In that case, you can clean the Roomba and dock terminals with a microfiber cloth, melamine foam, or a toothbrush.
You can also clean the roomba vacuum with a cleaning solution and dry clothes.
Here’s a more straightforward approach.
- On a clean surface, apply a small quantity of vinegar or alcohol.
- Soak the toothbrush or any other cleaning implement in it.
- Clean the charging connections on the Roomba and the dock lightly.
- While doing that, don’t put too much strain on yourself.
- After cleaning, use a dry cloth to dry the terminals.
Take out the battery and clean the terminals.
Aside from the dock and Roomba charging plates, carbon and dust can build up on the battery connections and terminals, resulting in a Roomba charging error 5 issue s.
However, it is also possible that the battery was not properly installed in the vacuum cleaner.
If you are experiencing the Roomba charging error code 5, follow the actions outlined below.
- Roomba should be turned off.
- Set it down on a table with its front facing you.
- Remove the four screws from the vacuum’s four sections.
- Remove the battery cover now. The battery will be visible.
- Take out the battery.
- Charging plates will be located on the battery’s front side.
- Allow them to dry after carefully cleaning them with a toothbrush and vinegar.
- The battery terminal may be found within the battery compartment. It should also be cleaned and allowed to dry for 5 minutes.
- Place the battery in the compartment after cleaning the battery and its connections.
- Put the lid back on and the screw back in place.
- Make a new charging dock for your Roomba.
Unplug the docking plate for a few minutes.
If you encounter a power problem because the dock is unable to give charge the device, you can address it by resetting the power cycle.
That being said, here is how you can reset the power cycle.
- Unplug the dock’s and power socket’s power cords.
- Allow it to sit like this for a few minutes.
- Replace the docking plate and the power cord in the socket.
- Dock the Roomba and check whether it charges.
Connect your Roomba to the power cable.
If you suddenly encounter “Roomba charging error 5” after charging your vacuum for a few minutes and it becomes too persistent, then there is a problem.
Now, if you are in a situation where you do not have enough time, you can charge the vacuum immediately with the charging wire and resume cleaning.
To do that;
Simply locate the charging socket on Roomba and plug in the power cable to begin charging.
Ensure that the yellow battery pull tab has been removed.
This section is intended for new Roomba users.
When you purchase a new Roomba vacuum or replace the battery, it will have a yellow battery pull tab at the bottom.
This is the battery safety tab, and you must remove it after purchasing it; otherwise, the battery will not charge.
Not only that, you should make sure it is correctly removed and not ripped, as this might be creating the charging error since a portion of it is still connected to the battery.
That being said, here is how you can check for the yellow pull tab:
- On the bottom of the Roomba, there are four screws. Remove the bottom cover by unscrewing it.
- After you’ve removed the cover, check the battery for any remnants of the yellow cover.
- Remove it if you discover it.
- Replace the battery properly.
- Replace the lid with the screws and tighten them.
- Dock Roomba and run a test.
Reset your Roomba
The difference between a soft and hard reset is that a soft reset does not erase stored dates and preferences, and it is also one of the easiest ways to resolve a software-based malfunction or charging issue.
So, if you’ve tried everything else, you should try a soft reset by following the steps below.
How to soft reset Roomba S, I, and 900 Series Models
- Hold down your Roomba’s Spot Clean, Home, and Clean buttons all at once.
- Hold the buttons down for a few seconds until you see the light surrounding the “Clean” button.
- Release the buttons when you see a light ring around the “Clean” button.
- After resetting, the vacuum will restart.
How to Perform a Soft Reset on Roomba 800 and 600 Series Models
- Hold down the Home, Spot Clean, and Clean buttons all at the same time.
- Now, hold the button down until you hear a beeping tone.
- Release the button after hearing the tone.
- Roomba will reboot.
Roomba Cleaner Factory Reset
Everything on your Roomba is erased during a factory reset.
What that means is all the settings are reset to their initial values.
That being said, you should only proceed with this if you have tried all the troubleshooting steps listed above and you are yet to get a response to the Roomba charging error 5 issues.
If so, here is how to perform a factory reset.
- Download the iRobot Home app for Android or iPhone.
- Check that your phone and Roomba are linked to the same Wi-Fi network.
- Start the iRobot Home app.
- Navigate to the Settings menu.
- Select factory reset.
- The Roomba will be returned to its factory settings.
Contact IRobot Support
The “Roomba charge error 5″ does not specify what is causing the problem.
So, if you’ve tried the previous techniques and your Roomba still isn’t charging, it might be an internal hardware problem that necessitates the assistance of a technical professional. However, you may contact Roomba customer service.
Roomba 650 charging error 5
If you are stuck with a charging error 5 and you are using a Roomba 650 model, the procedures listed above would resolve it. Unless you are faced with a hardware issue,
Here are the steps you should follow to fix your Roomba vacuum cleaner when it has a Roomba charging error code 5:
- Clean the dock and the Roomba charging stations.
- Clean the terminals and remove the battery.
- Connect the power cable to the Roomba directly.
- Make sure the yellow battery pull tab is removed.
- Reset your Roomba gently.
- Your Roomba has been factory reset.
- Contact iRobot Support.
Roomba 675 error 5
If you have a charging error 5 and are using a Roomba 675 model, the actions described above should help. Unless you are experiencing hardware problems,
Here are the measures to take if your Roomba vacuum cleaner has a Roomba charging error code 5.
- Clean the dock and the Roomba charging stations.
- Clean the terminals and remove the battery.
- Connect the power cable to the Roomba directly.
- Make sure the yellow battery pull tab is removed.
- Reset your Roomba.
- Your Roomba has been factory reset.
- Contact iRobot Support.
Roomba 5 side wheel error
When you are faced with a Roomba error code 5 issue, it means the right wheel of your J-series robot cannot turn.
Since that is the case, here are some things you can do to resolve it:
- Examine the right wheel for any obstacles.
- Shake out any loose debris that may be lodged in the tire well. You can do this by repeatedly pushing the wheels up and down.
- Turn both wheels quickly by hand to reduce any form of friction that is stopping them.
Conclusion
By now, you should have been able to figure out how to fix the Roomba charging error 5.
If this article has been helpful, feel free to bookmark this site to stay updated on useful tech fixes.