How to Charge Beats Studio 3 Wireless

You must have arrived at this website looking for information on how to charge Beats Studio 3 wireless.

Either you’ve just gotten one, or you cannot wrap your head around how to charge it. Or the Beats Studio headset isn’t charging, and you are looking to figure out how to fix it.

It can be anything else. But one thing lurking in your mind is how to go about charging the Beats Studio headset. If that is the case, you are in the right place.

Firstly, I will be breaking down the simple steps anyone can follow to charge their Beats Studio wireless headset and the different things to do about the headset if it stops charging.

Recommended: Beats Wireless Earbuds

How to Charge Beats Studio 3 Wireless

Table of Contents show

Charging your Beats Studio Wireless 3 follows a similar process to charging a smartphone that uses a USB cable.

However, I will share with you how to charge beats studio 3 wireless for new and ill-informed users.

When you’ve just gotten your Beats Studio 3 wireless headphones, You need to know the percentage of battery it has out of the box.

There are indicators on the Beats headset that you can use to determine what amount of charge is left in it.

Here is how to go about that:

When your headphones are not plugged in, you can use the Fuel Gauge LED lights to determine the amount of charge left on the headset.

Here is how to do that.

When the Fuel Gauge LED light gives 5 white lights, it means the headset is full or almost full.
When the Fuel Gauge LED light gives one red flash, it means the battery charge is low.
When the Fuel Gauge LED light gives off one flashing red light, it means that the battery is almost empty.
When the Fuel Gauge LED light gives the “no” signal, it means the battery has no charge.

These should be pretty easy to decipher, but if your Beat Studio 3 is coming right out of the box, You have to charge it.

Here is how to do that:

Connect the Charger to the Right Headphone Port

Get the Beats Studio 4 headphones and connect the charger to the right headphones. The headphones come with a USB cable. Connect the smaller side to the Beats 4 wireless headphone.

Connect the other side to a USB AC adapter

Now take the USB charger and connect the USB port to a USB AC adapter. You can connect it to a power outlet after connecting it to the adapter.

Additionally, you can decide to connect the USB port to a power bank or a laptop; however, these alternatives will make the charging time slow.

Now that you know how to charge the Beats Studio 3 wireless, let’s process how to deal with your beats studio 3 wireless not charging as I will be breaking down the different troubleshooting steps you should take to fix this.

How to Fix Beats Studio 3 Headphones that Aren’t Charging

There are an array of reasons why your Beats Studio 3 headphones might stop charging. In some instances, it could be a simple glitch in its operation, and in some scenarios, you might end up soldering components together. For this article,

We will be focusing on troubleshooting procedures that anyone can do with some effort.

That being said, here are the things you should do to fix your Beats studio 3 wireless headset when it is not charging:

Forget about it and Reconnect the Beats headphones.

The simplest thing to do over here is to unpair the headphone device from your smartphone; most likely, it is a minor glitch that can be resolved by pairing it again.

Here is how to do that:

On your iPhone, go to Settings > Bluetooth.
The devices that are linked to your iPhone may be found in the My Devices section.
Tap the “I” sign on the right side if your device is already connected and paired.
Select Forget This Device > Tap the Forget Device button.

After doing all these Reconnect your headphones to your smartphone by searching for them and pairing them once more.

Reset Beats Studio 3 Wireless

The Bluetooth device may occasionally experience a malfunction or connection issue that prevents it from charging.

Since that is the case, you can resolve this by resetting your Beats wireless headphones.

All you have to do is follow the instructions below to reset the Beats Studio 3 Wireless.

For 10 seconds, hold down the power and volume down buttons.
Release the buttons when the LED indicator flashes.
After doing all these things, your headphones will have been reset and are ready to be paired with your devices once more.

Change to another Power Source

I recommend charging your Beats Studio 3 with a different outlet or power source to double-check that the problem is still present.

If you can’t decipher that, try using a power bank to confirm that the charger is working just as it does when connected to a power outlet.

Try using another Charging Cable

If your power outage seems good and the power bank does not have any issues after testing it with other devices, you should confirm if the charger is still working fine.

If you are not sure about that, try changing the charger to confirm the state of the charger.

Check for any Physical Damage to the Port

If you’ve gone through all the steps listed above and yet you have not been able to figure out how to charge Beats Studio 3 wireless headphones, then your headphones might have a technical issue.

The sad news about this is that, if you are not a handyman or you don’t like taking electronics apart, you might have to contact a repairman.

In some scenarios, it could be something you can do yourself.

Replace the Battery

Try changing the battery in your wireless headphones if none of the above-mentioned techniques worked for you and the charging port appears to be in excellent condition.

Some users have stated that replacing the battery resolved the charging problem and made the headphones function like new once again.

How to Charge Beats Studio 3 Wireless Without a Charger

This question needs some clarification, depending on what you mean. If you are asking about how to charge Beats Studio 3 wireless without its original charger, that is absolutely possible, as you can decide to charge it with another USB cable.

And you can also decide to charge it using a power bank, a computer, etc.

However, there is no way you can charge your Beats Studio without a charger, as it comes with a battery, and the batteries need to be charged for the headphones to function.

Beats Studio 3 Manual

If you have a Beats Studio 3 wireless headphone and you cannot locate your manual, you can download the manual online over here.

How to Turn on Noise Cancellation in Beats Studio 3

Turning off external noise on your Beats Studio 3 is effortless. All you have to do is turn on your headphones and double-press the power button while the headphones are connected to your device.

Normally, this turns on anytime you power your Beats Studio 3 headphone; however, you can turn it off by double pressing the power button.

Beats Studio 3 Charge Time

After 90 minutes of charging, your headphones may be used for up to 22 hours of playback However, they can last for up to 40 hours when you switch off Pure ANC.

Additionally, Fast Fuel allows your headphones to last up to 3 hours on a single 10-minute charge.

Beats Studio 3 controls

The Beats Studio 3 headphones come with controls that allow you to play music, change the volume, use Siri, answer calls, and cancel noise.

Below, we will be exploring how you can do these things.

Play Button

The Beats Studio 3 comes with a “b” button that enables you to play or pause music. You can, however, do other things such as skip a song, scan an album, and so on.

Let’s explore what you can do with the “b” button.

Press once to stop or play a track.
Press twice to skip to the next track.
Press three times to go backward.
Press twice and hold on to the second press to advance through a track.
Push three times and hold on to the third press to scan backwards through a track.

Pick calls

Do you know you can also use the “B” button to pick up calls?

Here is how to go about it with the “B” button on the left earcup:

Press once to answer or end a call.
To answer a second incoming call while holding the first, push once. This alternates between calls when two are active.
Press and hold for 1 second to reject an incoming call.
Press twice to cease listening through your headphones and transmit the call to your phone.

You can also use the “b” button to activate “Siri” by pressing it until you hear a “chime.”

Vacuum adjustment buttons

Changing the volume is easy. All you have to do is press the button above the “B” button to adjust the sound. You can also use the voice button on the remote talk cable.

Conclusion:

By now, you should have figured out how to charge Beats Studio 3 wireless and what you can do if your Beats Studio 3 wireless is not charging.

The process and troubleshooting steps are similar if you have another model of Beats wireless headphones.

However, if you ever have difficulty identifying a controller or a component, You should also check the manual.

You May Like These!