Most people’s first option for entertainment is still television. This pattern of behaviour increased following the introduction of the internet.
Nowadays, every home has a television, which increases the need for cable subscriptions.
In metropolitan regions, cable service providers are readily available. Combined with that, these service providers deliver HD programming, video on demand, and hundreds of channels for a decent cost.
An excellent example of a cable subscription is Altice’s Optimum TV, which is one of the best service providers for cable, internet, and phone services.
While that doesn’t mean you might not face one or two challenges, one issue you may have is figuring out how to link your Altice remote to your TV, which may not be a problem if you’ve been using it for a long time.
However, if this is your first time using it or you’ve been using it for a long time and you can’t wrap your head around how to connect Altice remote to TV, you should read this to the end.
How to Connect Altice Remote to TV
The Altice box comes with a TV called the Optimum TV. It comes with a remote that you can use to perform operations such as power on/off, mute, and adjust the volume of your TV.
Other interesting functions include switching to other connected devices, navigating through a library of movies and TV shows with a button, and searching for your favourite content.
With all these new features, you’d be frustrated as to why With Altice remote isn’t working. And since that is the case, here is how to connect Altice remote to TV
How to Connect Altice remote to TV (Altice one box)
You can control the Altice One box with voice commands if you link the remote with it through Bluetooth.
You will also be able to manipulate the box while it is not visible.
Follow these instructions to link your Altice remote to the box.
- Locate the “A Button” on your remote and push it.
- From the home screen, select “Settings.”
- Locate and pick up the remote icon at the bottom of the screen.
- Select “Pair Remote to Altice One” and follow the on-screen directions.
- Now, select “Pair Remote Control.”
- When the remote is linked, you will get confirmation.
NB: if you have more than one Altbox in your home, the Altice remote will only work with the one you just paired. It won’t work with other Altice boxes. Additionally, doing all these will give you the ability to control the Altice box using voice commands.
Recommended: How to reset Altice one box
How to pair Altice Remote to Samsung TV
If you have a Samsung TV and you want to control the Altice router with your Samsung TV, here is how you should go about it.
- Turn on your television.
- Press and hold the power button for at least three seconds, followed by the number (5) for Samsung.
- After doing that, press “select” to illuminate the status light.
- Now, switch off your TV by pushing the power button.
- To save the code, press “select,” which will turn off the status light.
- Press the power button again to confirm the code.
How to pair Altice remote to LG TV
For LG TV here are the steps you should take to program your remote TV with Altice Box.
- Power your television.
- Hold down the power button for at least three seconds, followed by the number(2) for Samsung
- After doing that, it will illuminate the status light.
- Now, switch off your TV by pushing the power button.
- To save the code, press “select” to turn off the status light.
- Press the power button again to confirm the code.
How to pair Altice remote to Sony TV
Sony is an exquisite and well-known tech gadget brand. If you own a Sony TV here is how you can program your remote with the Altice box.
- Turn on your television.
- Press and hold the power button for at least three seconds, followed by the number(8) for Samsung.
- After doing that, It will illuminate the status light.
- Now, switch off your TV by pushing the power button.
- To save the code, press “select,” which will turn off the status light.
- Press the power button again to confirm the code.
Recommended: How to reset Optimum remote control
How to pair Altice remote to Vizio TV
If you are using a Vizio TV brand. The brand number required to program your Altice box differs from other brands. Combined with that, it requires some steps.
Here is how to go about it.
- Switch on your television.
- Hold down the power button for at least three seconds, followed by the number (8) for Vizio
- After doing that, It will illuminate the status light.
- Next, switch off your TV by pushing the power button.
- To save the code, press “select,” which will turn off the status light.
- Press the power button again to confirm the code.
How to pair Altice remote to Sharp TV
If you have a Sharp TV and you would like to control your Altice remote with your TV, you need to program it with the TV.
Here is how to go about it
- Switch on your television.
- Hold down the power button for at least three seconds, followed by the number (7) for sharp
- After doing that, It will illuminate the status light.
- Next, switch off your TV by pushing the power button.
- To save the code, the power button which will turn off the status light.
- Press the power button again to confirm the code.
If your TV is not mentioned above, you can make use of the auto programming method to connect your Altice remote to your TV
How do I pair my optimum remote to my TV using the Auto-Search
If you are stuck with the above method or you cannot identify with any of the TV brands listed above, here is how to connect Altice remote to TV.
- Turn on your television.
- Hold down the Volume and Power buttons for three seconds until the status light illuminates. After the status light appears, release the buttons.
- Press and release the number 1 key, then press the TV button to turn it off.
- After the television has turned off, press the Select button to save the code. The status light will be switched off as well.
- Check that the mute, power, and volume buttons on the remote work.
Altice remote TV codes
If the one-digit brand code is not giving you any positive results, you can use the four-digit code to connect your Altice optimum remote to your TV.
Before we delve into that, let’s list some of the most popular 4-digit codes from popular TV brands.
- Acer: 3651, 3851, 1681
- Advent: 0241, 2601, 2431,0271, 0001
- AOC: 0431, 1201, 2851,2631, 2411, 1951, 1861, 1081
- Citizen: 3981, 3261, 3121,2851, 2681, 1411, 0991, 0461, 0151, 0101, 0091, 0051
- Daewoo: 2041, 3981, 3361,3261, 3041, 3021, 2971, 2891, 2861, 2851, 2691, 2561, 2481, 2401, 1471, 1411, 0241, 0051
- Dell: 3301, 2701, 0001
- Digistar: 0001, 3801, 3301,2601, 2291, 1131, 0861, 0241
- Durabrand: 0991, 3401,2591, 2231, 1731, 0341, 0091, 0051
- Element: 4151, 0051, 0911,0671, 0561, 0541, 1631, 0081
- Emerson: 0051, 0081, 3151,2891, 2821, 2571, 2261, 2001, 0351, 4101, 3351, 3261, 3251, 3141, 3111, 3001, 2991, 2951, 2851, 2661, 2651, 2501, 2491, 2351, 2311, 2221, 2201, 2191,
- GE: 0821, 3861, 3341, 3271,3241, 2851, 2801, 2611, 2521, 2271, 2171, 2091, 2021, 2001, 0331, 0051
- Haier: 1131, 1191, 0341, 0051,3781, 2591, 2231, 1851, 0861, 0151
- Hisense: 0051, 0981, 0771,0311, 0281, 3371, 1761, 1661, 1651, 1561, 0861, 0151, 0001
- iLo: 3931, 3451, 3281, 2791,2771, 0611, 0091
- Insignia: 0271, 2311, 0991,1751, 0001, 1771, 1761, 1741, 1731, 1721, 1481, 0621, 0471, 0091, 0051
- Samsung: 0151, 3071, 1461,2831, 0051
- Sansui: 0991, 2661, 1961,0541, 0091
- Sanyo: 4161, 1281, 0221,0621, 0051, 3231, 2741, 2531
- Sears: 3861, 3231, 3151,3081, 2851, 2351, 2311, 2171, 2091, 1961, 1281, 1011, 0821, 0261, 0151, 0101, 0091, 0051, 0001
How to connect Altice remote to TV using the 4 digits
Another way you can figure out how to connect Altice remote to TV is to use the 4 digit code
- For a comprehensive list of codes, turn on your TV and look for your TV brand.
- Press and hold the TV and select the buttons for at least three seconds before releasing them to turn on the status light.
- Enter the four-digit code for your television’s brand to turn off the status light. The entire list of Optimum remote TV codes may be found here.
- Check the TV’s power function.
Recommended: Universal remote app
Altice Remote not Working with the TV
To figure out how to connect Altice remote to TV However, If your remote control is not working or is blinking, it indicates a lost connection to the Altice unit. There are a series of factors that could be affecting it.
Some factors that may contribute to the problem are malware issues, low battery power, or your Altice remote not pairing.
If that is the case, below are some troubleshooting steps you should take to resolve it.
Ensure it is in normal control mode
First, push the 7 and 9 dials simultaneously for a few seconds to transition the device from pairing mode to regular control mode.
Check the batteries.
A low battery can make it hard for pairing to occur.
If the first advice fails to stop the blinking, replace the batteries. If the batteries are low, it would keep disconnecting from the box.
In scenarios like this, try replacing the battery to see if the problem persists, If it doesn’t, proceed to the next troubleshooting step.
Power cycle your Altice box.
A power cycle can solve the problem if the Altice box is not working. if you want to power cycle it, Simply switch off the Altice box and then restart it.
Conclusion
You should have figured out how to connect Altice remote to TV by now.
If none of the above procedures works for you, please contact Altice Optimum customer support. However, if it worked, drop what has worked for you.