How to Fix GE Refrigerator Ice Maker Not Working

If you are experiencing issues with your GE refrigerator ice maker we are here to provide help on how you can resolve this issue. And also restore your refrigerator to its normal working condition.

The issue of your GE refrigerator not making ice can be due to a clogged water filter, stuck ice mold, the wrong temperature, and a blocked water line.

However, in this article, we will discuss how to fix the GE refrigerator ice maker not working.

How to Fix GE Refrigerator Ice Maker Not Working

We understand that your GE refrigerator ICE maker is giving you problems such as not making ICE or having little ICE after a long time. This article will discuss the steps that you need to take to resolve the issues with your GE refrigerator. But if it’s a technical issue you may need to contact an expert.

Recommended: How to Fix Whirlpool Refrigerator not Cooling

GE Refrigerator Ice Maker

Turn On/Off your GE Refrigerator

The first step you want to take when you discover that your GE refrigerator isn’t working or functioning well is to turn off the refrigerator. With that, you will have a glimpse of what is happening with the refrigerator.

  • Use the ice maker on and off selection on the control panel, depending on the icemaker design and the model of your refrigerator.
  • You would see an Icemaker pad or Icemaker setting for LCD touchpad models in the same display as your temperature controls.
  • For the LCD touchpad refrigerator models you can turn the icemaker on and off using the control panel on the fridge.  The on or off switch is similar to a light or power switch.
  • The on switch is at the top of the toggle switch while the off switch is at the bottom of the toggle switch.

On/Off the toggle switch:

  • Set the power switch to on.
  • You should see a green power light when the ice maker turns on.

To turn OFF the ice maker

  • Set the power switch to Off.
  • On/Off slide switch:

If your model of icemaker has an on or off slide switch. On and off will be visibly labelled on the ice maker. Slide the switch to the left to turn on the ice maker and slide the switch to the right to turn off the ice maker.

To turn on the icemaker

  • Slide the switch to the left so that the paddle is extended out past the ice maker.
  • To turn off the icemaker: slide the switch to the right so the paddle is under the ice maker.

GE Refrigerator Ice Maker

Power Reset GE Refrigerator

Ensure your power reset your GE refrigerator if this issue is due to a surge in the power supply unit. Turn off the power supply to the refrigerator briefly to try to reset the control panel.

Unplug the refrigerator or turn it off at the circuit breaker for 30 seconds to reset the control.

Follow these steps to reset your GE refrigerator:

  • Unplug your refrigerator from a power outlet.
  • Turn off the circuit breaker.
  • Leave your refrigerator unplugged for at least 30 seconds to reset the control.
  • Then plug your refrigerator back into a power outlet.
  • Turn your refrigerator back on.

Clean Water Filter

A water filter helps to sieve particles coming from the water. A clogged water filter can block the flow of water to the icemaker and in turn, ice won’t be produced as enough water won’t get to the ice maker. Check if your GE refrigerator model has a water filter and it should be changed every 6 months.

More sediment can enter the water system especially when there is new construction in your area. The extra sediment can clog your filters more often than the recommended 6 months.

Improper Temperature Settings

The GE refrigerator ice maker depends on the temperature to produce ice and should be set to the proper temperature settings. The recommended fresh food temperature setting is 37 degrees Fahrenheit. The recommended freezer temperature setting is 0 degrees Fahrenheit.

The icemaker must reach a temperature of 16 degrees Fahrenheit before it can begin a cycle. When the temperature in the freezer gets too warm, the ice cubes may not form or it may take longer for the ice cubes to form. Ensure you adjust the freezer temperature by slightly lowering its temperature.

When you have a low amount of food load in your freezer this can affect ice production. Ensure you have a good amount of food in the freezer, it can be about 3/4 or more, as this can allow temperatures to remain more stable. In case you just installed, the icemaker, it can take almost 24 hours before it gets cold enough to produce ice.

GE Refrigerator stuck ice mold

Stuck Ice Mold

When the rake ejects ice from the icemaker mold, the icemaker won’t be able to complete the required cycle. If the ice cubes get stuck in the icemaker mold and failed to eject.

Follow these steps to fix these issues:

  • Make sure your GE refrigerator icemaker is plugged in to a power source and turned on.
  • Check the water supply to the fridge and make sure you turn it on.
  • Check to see if the icemaker is paused.
  • Ensure that the paddle in the back position or the wire feeler arm is off, that is in the up position
  • When you have piled-up ice cubes in the storage bin this will make the icemaker to shut off.
  • Level the cubes in the bin or remove some of the ice to correct the ice maker.
  • Make sure an ice cube is not stuck in the ice maker.
  • If there is an ice cube stuck in the ice maker, turn the icemaker off, then remove the ice cube and turn the icemaker back on.

Block Water Line

Water flows through the water supply line,  and air can block the flow of water through the water line. Always ensure that water is turned on to the refrigerator at the shut-off valve on your refrigerator water supply line. Cycle the water supply line several times to purge any air within the water supply line before filling it with water.

Defective Door Switch

When the door of your GE refrigerator is opened or not properly aligned the water and ice dispenser will automatically turn off. The contacts in the switch can get burned out and should be replaced. To check the door switch, use a multimeter to measure for continuity on the switch. If the multimeter fails to read, then it should be replaced.

GE Refrigerator Ice Maker Making Noise

If your GE refrigerator is making a noise sound it is most likely coming from the icemaker or water valve and sometimes it is normal. However, if your  icemaker is making a rattling, humming, buzzing, or vibrating sound then your refrigerator is performing one of the following:

  • The ice maker is filling with water and this often occurs approximately every 1 hour to 2 hours.
  • You will hear a buzzing sound approximately every 15 minutes every time the icemaker attempts to fill with water. Ensure the water supply line connected to the refrigerator is turned on.
  • To stop the buzzing sound ensure the icemaker is turned off if water is not connected to the refrigerator.
  • On models with the filter located on the bottom freezer and side-by-side style refrigerators.  You may hear a buzzing sound for 5 seconds at least once every hour. This is caused by an isolation valve, designed to prevent leaks from the filter.

GE Refrigerator Ice Maker

Why Isn’t My GE Refrigerator Making Ice

If a GE refrigerator ice maker is not making ice or enough ice, then the temperature of your refrigerator may be warm. It is recommended that your freezer should be set to 0 to 5 degrees Fahrenheit for the production of ice. If your GE refrigerator gets too cold, ice may not build up and frost will prevent the ejection of ice. Also, a clogged water filter can block the flow of water to the ice maker. If water doesn’t get to the ice maker there can’t be the production of ice in your GE Refrigerator.

How Do I Manually Reset My Ice Maker

To manually reset your GE refrigerator ice maker Turn off the power supply to the appliance. First, unplug your refrigerator or turn off the circuit breaker, and wait for 30 seconds to allow it to settle. Then plug your GE refrigerator back into a power outlet or turn it on at the circuit breaker.

In conclusion, the issue of your GE refrigerator ice maker not making ice could be due to a clogged water filter, stuck ice mold, wrong temperature settings, blocked water line, and defective door switch.

Leave a Comment