How to Fix Roku TV Won’t Turn On

Roku TV won’t turn on is a very common problem with Roku TV devices whether or not your Roku TV is brand new. In most cases, when a device failed to turn on it may not be a mechanical problem. But it is worth noting that the solution to a device that won’t turn on might be different from device to device depending on the causes.

If your Roku won’t turn on because of a power surge the solution will be different from a Roku user whose Roku TV failed to turn on because the TV isn’t well connected to the power supply.

Therefore, we talk about the ways to detect the reasons why your Roku TV won’t turn on and the possible solutions to fix it on your own without breaking the banks.

Why Won’t My Roku TV Turn On

Guess the reasons why your Roky won’t turn on isn’t the best way to go about the causes. Rather, you have to be sure that you won’t carry out the wrong solution to fixing the Roku device if it doesn’t turn or if it won’t turn on.

With that, the following could be the reasons why your Roku TV failed to power on or turn on.

  • Faulty remote control
  • Faulty Power outlet.
  • Faulty surge protector.
  • Faulty Power strip.
  • Faulty Roku power cable.
  • Software issues.
    • Update firmware to the latest version
  • Hardware problems

How to Fix Roku TV Won’t Turn On

Since we know the possible reasons why your Roku won’t turn on we can then think of the solutions to the problems. Therefore, we suggest you try the following to fix your Roku device if it’s not turning on or if any of the possible causes above are observed.

Check Power Wall Outlet

Ensure the power cable of your Roku TV is receiving power from the wall outlet. If your Roku TV device is not receiving power, from the wall outlet, your TV won’t power on. You can use a multimeter to test for continuity of the power wall outlet. If the multimeter fails to read, then you need to repair the faulty wall outlet. You can also change the position of your Roku power cable to a good wall outlet.

Check Surge Protector and power strips

If you are connecting Your Roku TV device to a power strip then you need to check the power strip to ensure it provides power. The power strip might not be receiving power and in turn, your Roku TV won’t receive power as well. Ensure the power strip is firmly plugged and its ports are not overloaded with heavy appliances.

Surge protectors do wear out and when it does, it stops providing a voltage that is enough to power your Roku TV device. You can test the Surge protector with a multimeter.

But since your Roku TV won’t turn on, directly plug your Roku TV and remove any power strip or surge protector, as it can help fix this issue.

Check Power Cable

Ensure you plug the power cable directly into the power wall outlet, and firmly plug the other end of the power cord into the back of your Roku TV. Ensure your Roku TV receives power by making sure the power cable is plugged into a good wall outlet.

Check Status LED Light

The color of the standby LED light on each type of Roku TV product differs, but the most common is a red light color. The LED light on your Roku TV should appear to show that your Tv receives power and should be off when your TV is on.

To confirm the status of your Roku TV led light point your TCL Roku remote towards your TV, then press any button. The LED light should blink each time you press your remote control. But if your TV does not blink, then your Roku TV may not be powered on or not respond to your remote control.

In some cases, the LED light might be blinking and your Roku TV may fail to power on as a result of a Power surge. You should check the following settings if the LED light on your Roku TV is blinking:

Make sure you are using a good wall power adapter to power your Roku TV. Some USB ports may not provide enough voltage to power your device.

Use a different HDMI cable, or change the ends of the cable. If there is an issue with the HDMI cable it can affect functionality.

Perform a factory reset on your Roku TV. While plugged into power, press and hold the reset button on your TV for at least 20 seconds. For some Roku TV models, carefully insert a pin or pen tip into the small reset hole on the back of your Roku TV, then press the internal button for at least 20 seconds.

Roku TV won't turn on

Check Roku TV Remote Control

You need to often check the condition of your Roku remote control. If the battery of your Roku remote control is low on power, then your TV won’t respond. Roku remote control uses two types of batteries, a built-in rechargeable battery, and a standard battery. You can click this link on how to fix Roku remote not working and how to pair your Roku remote control. We would provide you with general tips on what to check for in your Roku TV remote control.

  • Ensure you replace your remote control with the appropriate battery.
  • Ensure you re-pair your remote control and you should replace the batteries.
  • Make sure nothing is blocking the signal of your Roku remote control.
  • Make sure the buttons on your remote are not stuck or difficult to press.

Power Reset Roku TV

A power reset can help to fix temporary problems including power surges, system failure, etc. You can power reset your Roku TV without using a remote control. Follow the steps below to power reset your Roku TV device:

  • Unplug the power cable of your Roku TV device from a power wall outlet.
  • Remove the other end of the power cord from your Roku TV device.
  • Wait for at least 60 seconds for your device to reset power.
  • Now plug back the power cable into the wall outlet.
  • Reconnect the other end to your TV device.
  • Now power on your Roku Tv.

Perform a Factory Reset

You can perform a factory reset on your Roku TV through the reset button on your Roku Device. Follow these steps:

  • Plug your Roku TV device into power.
  • While still plugged press and hold the reset button on your TV for at least 20 seconds.
  • Your device should power off and power on the back.

Perform a Hard Factory Reset

Since you are currently faced with issues your Roku TV won’t turn on. Also since we can’t access the factory reset option from our Roku TV, we can carry out a hard reset. To perform a hard reset on your Roku TV follow these steps below:

  • Get a straightened paper clip or ball-point pen.
  • Press and hold the recessed Reset button on your Roku TV connector panel.
  • Continue to hold the Reset button for about 12 seconds.
  • When the Reset cycle is completed, the status indicator would appear dim.
  • Now release the Reset button and your Roku TV will now power off.
  • Then power on your Roku TV.

Roku TV won't turn on

Hardware Issues

Hardware issues often occur with all manufactured products, if there are issues with the motherboard panel of your Roku TV then it could fail to power on. Therefore if you found out that this issue is hardware related, after trying all the steps that we listed above.

Roku TVs are manufactured by brands such as Element, Haier, Hisense, Hitachi, Insignia, JVC, LG, ONN, Phillips, RCA, Sharp, and TCL. Each of these manufacturers provides customer support services for your Roku TV to fix problems that you may encounter with their Roku TV product.

You can return your Roku Tv to the place of purchase or you can contact your TV manufacturer through the internet. You will be asked to provide your TV model number and other proof of payment which you must be able to provide. You can get your TV model number on the back panel of your Roku TV. The warranty covers most Roku Tv products for 12 months after purchase.

In conclusion, on solving the issue of your Roku TV won’t turn on. Make sure you follow these steps:

  • Ensure you change the power wall outlet if found faulty.
  • Remove surge protector and power strips if connected to your Roku TV.
  • Check and change faulty power cable
  • Check the Status LED Light and fix it accordingly
  • Check the condition of your Roku TV remote control.
  • Power reset your Roku TV
  • Perform a factory reset
  • Perform a hard factory reset
  • Lastly, contact the customer support service of your Roku TV to provide

With this, you should have control over your Roku TV power on or not. If none of the above steps matches the fix, then, you may need to contact Roku support for more direction or better still return the TV if it’s not physically damaged and the warranty is still valid.

Leave a Comment