- Advertisement -

How to Resolve Dyson Vacuum no Suction

The suction of your Dyson vacuum suddenly stopped working and left you wondering what you can do to resolve the Dyson Vacuum no suction problem. Then you do not have to worry much, as this article will explain possible reasons why it is happening and how to resolve it.

The Dyson vacuum cleaner is one of the most powerful vacuum cleaners on the market. It is loved by many because of its reliability, efficiency, and assurance of doing the job excellently.

However, there are times when the suction stops working, and when this occurs, the Vaccum cleaner would no longer be able to suck in the dirt; instead, it would just push the dirt around on the floor.

The remaining section of this article will explain the possible reasons why you are experiencing the Dyson vacuum no suction issue and how you can fix it.

Possible Reasons for Dyson Vacuum No Suction

Different reasons can cause the Dyson vacuum no suction issue, and they all tend to cause blockage in the Vacuum air duct, preventing it from suctioning correctly.

Some of the commonly reported reasons are:

  • Clogged Vacuum filters.
  • The dust container of the vacuum is full.
  • Some part of the vacuum cleaner is experiencing a blockage.
  • There is an air leak, which is most definitely caused by the poor installation of the vacuum parts.

You can also check out How to Clean a Shark Vacuum Cleaner.

How to Fix Dyson Vacuum No Suction

Various reasons might lead to the blockage of the vacuum’s air duct, eventually preventing it from suctioning dirt efficiently.

We would look at the common reasons and the steps you can take to resolve them.

Full Dust Container

This is a commonly reported reason for the Dyson vacuum no suction issue. This is because continuous airflow through the vacuum also passes through the dust/dirt container.

A full dust container would reduce the airflow, eventually causing air not to flow through the vacuum, eventually leading to a loss of suction power.

Depending on your Vacuum model, you can quickly resolve this by emptying the dust/ dirt container/canister.

You can also take the opportunity to wash the canister/container, as this might prevent an awful smell from emanating from the vacuum cleaner when it is in use.

Clogged Vacuum Filters

The filter is an integral part of the Vacuum cleaner, as it helps to remove debris and other particles.

However, because of its role, it gets easily clogged with dirt, and when this happens, the airflow through the filter will reduce drastically and might cause the vacuum to lose suction power.

Follow the instruction below to clean the clogged Dyson vacuum filter.

  •  Unplug the vacuum cleaner from its power source.
  • With the help of a screwdriver, remove the screw at the top of the vacuum cleaner and remove the filter.
  • Then gently wash the filter under lukewarm running water.
  • When sure it is clean enough, gently dry with a clean cloth.
  • Then you should place it in a dry place and allow it to dry for at least 24 hours.
  • Then put it back in the vacuum cleaner and screw the vacuum back in place.

You can then use the vacuum cleaner to confirm that you have resolved the Dyson vacuum no suction issue.

fix Dyson vacuum no suction

Blockage in some Parts of the Vacuum Cleaner

Every part of the Vacuum cleaner plays a role in ensuring that the vacuum works properly.

If any part of the vacuum is experiencing a blockage, it would eventually affect the vacuum cleaner’s suction power.

So if your vacuum is not suctioning well, there are certain parts of the vacuum you must inspect for signs of a blockage, and they are:

  • The turbine head.
  • The hose.
  • The wand
  • The inlets.

Follow the instruction below to check for blockage.

  • Disconnect the vacuum cleaner from its power outlet.
  • Then unscrew the vacuum and separate the different parts.
  • Check each part for signs of blockage by dirt or other particles.
  • Then clean each part to remove the dirt and particles causing the blockage.
  • If you washed any parts with water, you should wait for at least 24 hours before reassembling.

After you have reassembled the individual parts, you can use the vacuum cleaner to confirm that you have resolved the Dyson vacuum no suction issue.

Air Leak

If your vacuum is not suctioning correctly, it could mean that air is not flowing through it properly because of an air leak somewhere in the vacuum that is not correctly sealed around the inlets.

To detect where the leak is coming from, you should turn on your vacuum, listen for a whistling or suction sound from the hose or wand, and locate the direction of the sound.

Once you know where the sound is coming from, you should disassemble your vacuum cleaner and check that part for signs of tear or the presence of a hole.

If you find either of them, the available solution is to order a replacement and replace the defective part.

After replacing the defective part, you should reassemble the vacuum and use it to clean to ensure you have resolved the Dyson vacuum no suction issue.

How to Fix Dyson Ball Vacuum no Suction from Base

The Dyson ball animal vacuum might lose suction for different reasons. However, the common reasons are clogged filters, clogged nozzle, clogged cyclone assembly, faulty motor, and damaged hose.

Suppose the issue is from a clogged filter, nozzle, or cyclone assembly. You only have to disassemble the parts, remove the dirt and particles causing the blockage, and reassemble.

If it is the case of a faulty motor or damaged hose, you will have to order a replacement and replace the defective component.

Dyson ball vacuum no suction

Dyson Loses Suction when Tilted

If your Dyson is losing suction when tilted while it is being used, it could be caused by a clogged filter, wand, or brush bar.

You should disassemble the vacuum cleaner and check the individual parts for signs of blockage.

Then clean the parts to remove the dirt and particles causing the blockage, and if you washed with water, you should wait for at least 24 hours before reassembling it.

Dyson loose suction when tilted

Conclusion:

This article has explained the possible reasons for the Dyson vacuum no suction issue and how to resolve it.

Always remember to disconnect the vacuum cleaner from its power source before disassembling it to prevent electric shock.

Also, if you wash any parts of the vacuum cleaner with water, it is advisable to allow it to dry for at least 24 hours before putting it back in the vacuum.

If you have tried any or all of the troubleshooting methods in this article with no success, then it is recommended that you seek the help of a professional.

Related Posts

Leave a Comment