If you have a Whirlpool washer. One of the things you would appreciate about this electronic is its durability and the low maintenance needed to keep the electronic neat and running.
However as efficient as the electronics can get, we would have to come to terms with the fact that sometimes the behaviours of this equipment can go sideways.
For example, you could be experiencing continuous wash cycles on the Whirlpool washer without stopping or maybe the washer is displaying an error code and more.
Other numerous issues which are related to its technical parts could also arise, but they are not to be confused with each other.
If you are faced with a similar issue as described above, Then you need to reset Whirlpool washer.
But, before you proceed to that you want to verify your whirlpool washer model since the reset guideline I would be dwelling on would be tailored to these models below
- 2LA5700XMW0
- 2LA5700XMW1
- 2LSR5233BN0
- 2LSR5233BQ1
- 2LSR5233BW0
- 2LSR5233BZ1
- 3CA2000XMW0
- GHW9100LW1
- GHW9100LW2
- GHW9150PW0
- GHW9150PW4
- GHW9200LW0
- LSQ8243HQ0
- LSR7233EQ0
- LSR8233EQ0
- LXR9245EQ
- WFW72HEDW0
- WFW9150WW00
- WTW4800XQ2
- WTW4800XQ4
- WTW5000DW1
If yours is one of these you need to follow the instruction below.
The first step you should consider if you want to reset Whirlpool washer is to Restart the washer.
Recommended: How to Reset Oculus
1. Power Off and restart the washing Machine
Over here what you need to do is straightforward. However, while doing this you want to ensure that the Whirlpool machine is turned off before removing the cable connected to the power outlet.
Anyway, here is how you do it.
- Use the control Panel to Power off the Whirlpool washer.
- After doing that, remove the whirlpool washer plug. You are simply doing this to allow the power to leave the washer to be double sure it is completely OFF.
- Now, you will have to wait for at least 2 minutes before plugging back the Whirlpool washer.
- Once you’ve plugged it, give it a while before you power it ON.
After acting out these steps your Whirlpool machine would be reset. and the issues you are facing must have stopped, however, if it persists then you want to try out the next troubleshooting option.
2. Lift the lower Lid
Now, this method might be a bit out of place however what you have to consider here is this. You have to leave your Washer for at least 10 minutes.
Here is how to go about it.
- Turn the Washer OFF from the control panel
- Unplug it from the power socket.
- Now leave it for 10 minutes before you plug it back into the socket.
- Now power it On and try liting the lid 6 times within a 30-second window. You simply have to lift and lower it.
- After doing this your whirlpool washer should reset and start working.
If after doing this you were not able to reset Whirlpool washer or it doesn’t work you should try out the Cario Reset method
3. Cabrio Reset Procedure
To carry out the Cabrio reset Method here is how you should go about it.
- Locate your Display pad and Hit any Button there.
- Now, Press start so as to pick another cycle
- After doing that, Unplug the Washer from Power and wait for at least 5 minutes before powering it back ON.
- Now, select a new cycle and press “start”.
If you were able to reset your Whirlpool washer, your Whirlpool washer should start working.
A handful of users have commented on this method however if this didn’t work for you. The last method should get the job done.
4. Resolve by Pressing these Button Combinations
Over here, you have to press some buttons simultaneously, however, it will most likely work for you if you follow these steps correctly.
Here are the instructions
- First, switch OFF your Washing machine by powering It OFF from the Control Panel and then remove it from the power socket.
- After a while, power On the Washing machine from the socket but the Whirlpool washer has to be OFF.
- Now, Start pressing the program (2) button, and then the Water Level Button should be pressed twice. If you do this step correctly, you will see all indication lights blink.
- Moving on, go to the panel and press all the buttons, one after each other except the power button
- Once you’ve done that, lift the lid of your washing machine and you should hear a beep sound.
- Now close the lid, while your Washing machine begins the RESET process
Reset Whirlpool Washer Front Load
If you are using a Whirlpool washer front loader instead and you want to Carry out a Reset due to one issue on the other below are the procedures you should follow to do that.
- Remove its power from the socket
- The first thing to do to reset the whirlpool front loader is to switch Off the Washing machine.
- Now, unplug it from the wall socket.
- After doing that, wait for 2-5 minutes before plugging the socket back.
- Once, you’ve plugged it into the power source, give it about 30 seconds before turning ON the Washing machine from the control panel.
You can confirm if the rest solved any issue you are facing by starting a new cycle.
In other instances, if you are struggling with error codes here is what you can do to clear and reset the error code issues
- Press the Pause/Cancel Button Twice
- Now, press the Unit button once.
How to Reset your Whirlpool Washer Touch Screen
if you are using a Whirlpool Cabrio touchscreen Washer below are e the instruction you should follow to reset Whirlpool washer if you are faced with any issues.
First method
- Locate the Display Pad and press either the Pause or Cancel Button.
- Next, select another fresh cycle and hit on “start”
- After doing that, wait to see if the error comes up again. If it does Disconnect the power.
- Be patient for 15-30 seconds before you power it on.
- Once, it’s ON, select a new cycle and hit the start button.
- Now, run an empty test load to verify if the Reset you just did works.
If it doesn’t work try out the second method below
Second Method
- First and foremost, turn off the Cabrio Washer
- Now, choose Normal Mode from the selector
- closely do this, Turn the dial counter one click LEFT then Three Clicks RIGHT and then one click LEFT, and then one click RIGHT.
- After doing this, press the Start button. You will notice that the indicating will come ON.
- Now, hit the “Start” and “Stop” buttons once.
- Next, rotate the Dial till the Rinse, Wash, and Stoplight come up
- After that, Disconnect the power connection
- Now be patient for 15-30 seconds before you power it ON.
- Finally, Turn on the washer
- By Now, the Cabrio washer will be reset.
- You can Run an empty test load to verify if the reset did work
How to reset the whirlpool Washer Door Locked
If you own a Whirlpool front-loading washing machine. One of the apparent features is its automatic door opening after completing a wash cycle. As usual, it isn’t error-proof.
So if you are faced with any issue, resetting it might be the way to go.
To rest it follow these steps below
- Remove your Whirlpool washing machine from the power socket for about 45 minutes
- After doing that, Plug it back into the power socket and start the washer.
Doing this should reset the washing machine while resolving any pending issues you are struggling with.
How to reset Whirlpool Duet Front load Washer
- To reset a Whirlpool Duet Front Load washer follow the steps below
- Remove its power from the socket
- Switch Off the Washing machine.
- After doing that, Unplug it from the wall socket and wait for at least 30 seconds
- Now, plug the socket back.
- Once, you’ve plugged it into the power source, give it about 30 seconds before turning ON the Washing machine.
You can confirm if the rest solved any issue you are facing by starting a new cycle.
How to reset Whirlpool Washing Machine 6th Sense
To reset your Whirlpool washing Machine 6th Sense. The procedures follow a similar process as other whirlpool washing machines.
- To reset your Whirlpool front load you need to first switch off the washing machine.
- Now, unplug the Whirlpool washing machine from the wall socket while waiting for at least 5 minutes.
- Now, plug the socket back and give it 30 seconds before powering it ON.
Another method you can use to reset the whirlpool washing machine’s 6th sense is to press the power button for about 5 seconds.
How do I Reset my Whirlpool Top load Washer?
The Whirlpool top lead washing machine also follows a similar process as other whirlpool washers, all you have to do over here is this;
- Unplug the washer for 2 minutes.
- Now, plug it back in while waiting for about 30 seconds before restarting.
Start it up, and try running a new cycle to see if your washer has restored to its normal state.
Now, for the Samsung Washing machine/Dryer users, you can check here to figure out how to reset your Samsung dryer.
Conclusion:
Hard resetting works if you are not faced with a technical issue, however figuring out how to Reset Whirlpool Washer always follow a very similar process among its numerous model.
However, you are always advised to go through the manual if you are stuck with an error code-related issue since it differs for each model.
Finally, if after trying all these you were not able to figure out how to reset whirlpool washer, kindly drop your comments below.