If you own Skullcandy Earbuds, one of the things you might struggle with is pairing your Skullcandy earbuds with different devices.
If you have an iPhone and an iPad or you have one of these with a PC or an Andriod, but you cannot seem to figure out how you can pair your Skullcandy earbuds with your other device here is an article we put together to put you through.
It’s totally normal, and since you’ve landed here let’s walk through some common methods on how to pair your wireless Skullcandy earbuds Indy.
How to Pair Skullcandy Wireless Earbuds Indy
Pairing issues aren’t solely particular to any wireless brand of earbuds. It is a general issue.
If you use Skullcandy earbuds, you might struggle to pair your wireless earbuds to another device as your Skullcandy earbuds won’t show up on the other device.
In this scenario, here are the steps you need to follow to resolve that
- Turn off your Skullcandy wireless earbuds by holding down the power button for 4 seconds
- Now turn it on by holding it for 6 seconds, and keep holding it till it enters pairing mode
- Once it turns blue, it will show up on your smartphone.
NB: you can decide to do this one by one, however, you need to ensure that, both of them are turned off before they are powered on.
That being said, once you pair your Skullcandy wireless earbuds with a smartphone device when next you want to pair with such a device, it would be automatic.
Skullcandy Indy not Paired together
If you still have one or two issues pairing your Skullcandy Earbuds to a device you haven’t used before, you are not alone.
The steps listed above did some justice on how to pair Skullcandy.
- Firstly unplug your Skullcandy Earbuds from any previously connected device.
- Now hold the Skullcandy earbuds till it goes off
- Next, hold down the Skullcandy earbuds for 10 seconds to kickstart the pairing process
- After doing that, the red light changes to blue and the earbuds alerts you once it enters pairing mode.
If you are not able to pair your Skullcandy earbuds after following all the steps highlighted above, then you need to reset your Skullcandy wireless earbuds
Here is how to do that
How to Reset Skullcandy Wireless Earbuds
If you own Skullcandy Earbuds one of the things you might struggle with pairing your Skullcandy earbuds with different devices.
Maybe you have tried all the steps listed above, but you haven’t been able to figure out how to pair Skullcandy Wireless earbuds indy, then you are at the right place.
All you need to do is, remove your Skullcandy device from the Bluetooth of your smartphone and add it back.
Here is how you should go about that if you want to reset your Skullcandy earbuds
- Unpair your earbuds from your smartphone or PC Bluetooth menu.
- Now, Press and hold down the power button on both earbuds for 6 seconds till they turn off
- Immediately they are off press and hold the same power button for 10 seconds.
- After doing that, place your Indy Evo earbuds into their case. If you do all these correctly, the corresponding LED light will give a red flash.
- Now, take out the Earbuds from the case and the earbuds will power on without assistance while the LED will flash a blue light.
- The earbuds will start to connect and once they are synced, an audio prompt will inform you of that
Recommended: How long do Earbuds usually last
How to Connect Skullcandy Wireless Earbuds to Samsung
If you own a Samsung smartphone and you trying to figure out how to pair Skullcandy wireless earbuds indy. The first thing you want to confirm is if you have once connected to another device aside from the Samsung smartphone you want to connect to.
If you have, follow these procedures below to connect your Skullcandy earbuds to Samsung
- Turn off your Skullcandy wireless earbuds by holding down the power button for 4 seconds
- Now turn it on by holding it for 6 seconds, and keep holding it till it enters pairing mode
- Once it turns blue, launch your Samsung smartphone and navigate to Bluetooth > recent devices > new devices.
- Under new devices, you should see the Skullcandy earbuds
How to pair Skullcandy Earbuds to Android
The procedure you need to follow if you want to figure out how to pair Skullcandy wireless earbuds indy with an Andriod OS follows a similar process when you want to do the same for an iPhone.
If you have any brand of smartphone running on the android operating system, here is how you can pair it with your Skullcandy earbuds
- Turn off your Skullcandy wireless earbuds by holding down the power button for 4 seconds
- Now turn it on by holding it for 6 seconds, and keep holding it till it enters pairing mode
- Once it turns blue, launch your Samsung smartphone and navigate to Bluetooth > recent devices > new devices.
- Under new devices, you should see the Skullcandy earbuds
Now that you are aware of how to pair Skullcandy Wireless earbuds indy, let’s delve into some commonly asked questions regarding this topic
Recommended: Best cheapest Bluetooth Earbuds
How do you put Skullcandy Indy in pairing mode?
Putting your Skullcandy wireless earbuds isn’t soo hard, all you have to do is remove the Skullcandy earbuds from the case and they would be placed in pairing mode.
If you are not picking the Skullcandy earbuds on your device, you have to reset it by holding the Skullcandy earbuds for 6 seconds till they go off
Now, hold each earbud for 10 seconds and insert it into the Skullcandy case and remove it.
How do I reset and pair Skullcandy Indy?
Resetting your Skullcandy earbuds means you are unpairing them from a device it is connected to and now you are pairing them back. Simply follow the steps above to reset your Skullcandy earbuds
Why are my Skullcandy Indy not pairing?
Skullcandy is one of the cheapest options for wireless earbuds out there if you are looking for something cheap that performs a decent job
Recommended: Best cheapest wireless earbuds
Due to their affordable price, they come with connectivity issues over time, however, you can always resolve it by resetting your Skullcandy earbuds
Conclusion
By now you should have figured out how to pair Skullcandy wireless earbuds indy. if you are stuck with your earbuds till now, you have to contact Skullcandy support for help