Are you getting the DC code error on your Samsung washer during a wash cycle and wondering how to fix the Samsung washer DC code error? Then you are in the right place, as this article will explain the meaning of the error and how to resolve it.
The Samsung washing machine is one of the most popular washing machines in the market and the preferred choice for many people.
Besides the fact that the Samsung brand is well-known and loved by many, its washing machine boasts impressive features like hygienic steaming, durability, efficiency, and reliability.
Like every known electrical and mechanical gadget, the Samsung washer can also develop faults, although the occurrence is usually few and far between.
One of the common errors you can encounter when using the washer is the Samsung washer DC code error, and this article sections will explain the meaning of the error code and how to fix it.
What is Samsung Washer DC Code Error
When the Samsung washer DC code appears on your washing machine during a wash cycle, it simply means that there is a load imbalance, i.e., the current load in the washer is not evenly distributed, which might be preventing the washer from spinning effectively.
Some of the reasons why a load imbalance issue might occur include:
- Too many heavy items like bedsheets and comforter in one wash cycle.
- Bulky items like jeans and heavy sweaters
- Too little load for a cycle.
- Too many clothes are put together in one wash cycle.
You can also check out How to Fix Samsung Washer SE Code
How to Fix Samsung Washer DC Code Error
There are different methods you can attempt to fix the Samsung washer DC code error, and some of the common methods will be explained in this section of the article.
If the load in the washer is not evenly distributed, with more items on one side of the spinner than the other, the washing machine sensor will react and probably stop spinning.
If you are washing many bulky items like bedspreads, jeans, heavy sweaters, and comforters, then you can attempt to distribute them around the spinner evenly.
If that does not work, it might mean that the load is too heavy for one wash cycle, and removing some clothing items from the washer might help resolve the issue.
Recommended: How to Reset Samsung Fridge and Filter Light
Level the Washing Machine
It is important to ensure that your washing machine is correctly leveled because it might trigger the sensors and cause the Samsung washer DC code error when the washer is not leveled.
Follow the instructions below to ensure that your Samsung washer is leveled correctly.
- Switch off your Samsung washer and disconnect it from its power and water supply
- Put a bubble level on the washer’s top. Your washer isn’t sitting level if the bubble is not in the center of the bubble level.
- Then move your washer till the bubble is at the center of the bubble level
- Then make sure your washer sits level on the floor by adjusting its legs and pegs.
After you are satisfied that you have leveled your washer, you can then turn it on and attempt a wash cycle to confirm that you have resolved the Samsung washer DC code error.
Replace the Washer Suspension Rods
The Samsung washing machine uses suspension rods to absorb shock and shaking, primarily when the washer is spinning during a wash cycle.
Suppose the suspension rods are defective and begin to malfunction. In that case, it can cause the washing machine sensors to believe that the wash load is not adequately balanced, leading to the Samsung washer DC code appearing during the wash cycle.
If the suspension rods are defective, you need to purchase a replacement and follow the instructions below to replace the current suspension rods in the washing machine.
- Turn off your washing machine and unplug it from the power and water supply source.
- Then move the washing machine away from the wall.
- Now use a screwdriver to unscrew the screw holding the control panel in place and disconnect the wire harnesses connected to the control panel.
- Then gently remove the control panel and put it in a safe place.
- Now carefully remove the side panels of the machine to have access to the suspension rods.
- After accessing the suspension rods, carefully take each one out individually until you have removed all the suspension rods in the washing machine.
- Then spray some silicone oil on the new suspension rods and individually place them securely into position in the washing machine.
- Now put back the side panels in position, and screw back the control panel securely.
After successfully changing the suspension rods of the Samsung washing machine, you should attempt a wash cycle to confirm that you have successfully resolved the Samsung washer DC code error.
How to Resolve Samsung DC3 Error Code
The Samsung washer DC3 error codes occur on the Samsung quick drive washing machine models, and it primarily means the add door/unlock feature is not working efficiently.
To resolve this error, all you have to do is turn off your washing machine and restart the current wash cycle.
How to Fix Samsung Washer DC1 Code Error
The DC1 code error on your Samsung washer simply implies that the add door/unlock feature is not working correctly.
You can quickly fix this by turning off your washing machine and restarting the wash cycle.
What are Samsung Fault Codes
The Samsung washing machine has different fault (error) codes that help you quickly identify various reasons why your device is not functioning at an optimal level.
Some of the standard fault codes are listed below.
- 2E: When this error appears on your washer, it means there is a failure with the internal control board.
- 3E: This error implies that the washing machine is not getting any signal from the drive motor tachometer.
- E2: This error means that one of the keys on the control board is stuck.
- SF: This error code implies that there is the main PCB error.
- OE: This denotes a water overflow during the wash cycle.
- NF1: This error indicates an improper hot and cold water hose connection.
- TE: This error means the water temperature is too hot or too cold.
- ND: This error code indicates that the wastewater from the washer is not draining as expected
- HR: This indicates that the heater relay has failed.
- LO or FL: This error code indicates that the door lock of the washing machine is malfunctioning
- DS: This code implies that the door of the washing machine is not locked at the beginning of a wash cycle
- DC: This indicates that the load in the washer is not balanced.
- SUD: This denotes an excessive amount of suds during a wash cycle.
- IE: This error implies that the water sensor has failed.
- NF: This indicates that it takes too long for the washer to fill with water.
- LE: This suggests that the water level has dropped during a cycle.
This article has explained various reasons why the Samsung washer DC code error might appear during a wash cycle, and different troubleshooting methods you can employ to resolve it.