The most sophisticated smartphones all come with a level of protection against water – the iPhone 8 is not an exemption. We brought you some other Apple phones that are waterproof But does that make the iPhone 8 waterproof or water-resistant also? Read this article to discover.
“Is the iPhone 8 Waterproof?”
This question comes under the notion that you (most people) may not totally have the understanding of what exactly ‘Waterproof’ means. So, first, the answer to whether the iPhone 8 is waterproof or water-resistant depends largely on what ‘waterproof’ means to you.
To start with, the iPhone 8 has an IP67 water resistance rating. What this means is that your iPhone 8 or iPhone 8 Plus device has the capability of withstanding being immersed in water up to 3.3 feet for about thirty minutes. Looking at this technically, it means that your iPhone 8 or iPhone 8 Plus device is water-resistant and not waterproof.
We should let you understand that the iPhone 8’s water resistance is capable of deterioration over time. This can happen simply if you keep pressurizing the water-resistant seal. That your iPhone 8 or iPhone 8 Plus is water-resistant does not entirely mean that it can withstand all kinds of liquids.
And Apple does not give a warranty for liquid damaged iPhones, even though they have told us that it is water-resistant. In that manner, your best bet is to ensure your iPhone 8 or iPhone 8 Plus does not come into contact with liquid at all.
What Should I Do If My iPhone 8 Drops Inside Water?
We have made you understand that your iPhone 8 or iPhone 8 Plus comes with a certain rate of water resistance. So, what if you immerse your iPhone 8 or iPhone 8 Plus device in water for too long? We advise that
- First, you check the built-in Liquid Contact Indicator. The built-in Liquid Contact Indicator is naturally located behind a cover which is just below your iPhone’s power button.
- Now, if red appears on your indicator, it means that your phone has had contact with liquid and that has likely left your iPhone device damaged.
- If this is your case, ensure you check out these steps that we have provided for you to get your iPhone device working in shape.
Step one: Turn Your Phone Off.
This should be your very first step.
- Turn your iPhone device off the moment your phone has come in contact with water or any other form of liquid. You don’t have to first check your phone after it has come in contact with any form of liquid to see if it is working.
The idea behind this is that you want to halt the power on your iPhone before the liquid could travel around your iPhone’s electrical features. That way, you just might have reduced the level of damage caused.
It is worthy of mentioning that an iPhone that looks to be in a perfect condition, after dropping into water or any form of liquid, can be damaged permanently, simply as a result of short-circuiting.
Step Two: Wipe Your Phone
After you must have turned off your phone,
- Next, wipe off every visible liquid on your iPhone and also the liquid that exists inside your phone.
- Wipe off the liquid with an absorbent fabric, a towel will do.
- Next, wipe around the holes in your iPhone device and also on the buttons so as not to allow liquid seep far inside.
- Ensure your phone is externally dry before you check on your Liquid Contact Indicator. By doing this, the liquid will not seep to that spot when you open it.
A recommendation from Apple for internal liquid says that you can tap your iPhone against your hand. Just ensure the lightning connector or power port is facing down.
By tapping your iPhone against your hand, you should be able to send the liquid out of the holes at the bottom of the phone. And by this, your iPhone device will dry out in a safe way.
Step Three: Ensure Your iPhone Gets Dry.
Next, you have to completely wait for your iPhone to get dry. It is not advisable to power your iPhone back up if it is still wet. It is also not advisable to charge your iPhone device.
- Leave your iPhone device in a place to dry. Leaving your iPhone device in front of a fan is a good way to speed up the drying process. Apple even recommended this procedure. Good airflow will ensure your device gets dry in no time.
- A fan is your best option, it will provide you with the right amount of air motion for drying. It does so without being too intense.
- You can also leave your iPhone device stored with a desiccant – a substance that can pull out the liquid from your iPhone.
- You can place your iPhone device in a container with a lot of desiccants. You will need to do this for an extended period of time – like five to seven days.
When you have tried these three steps, you can turn on your phone to see if it still functions properly. There is a possibility that your iPhone device will not function. If this happens, head to step four.
Step Four: Get A New iPhone.
The only thing to do in this step is to prepare your mind for a potential new iPhone device. You can check out your phone provider to know if you are due for an upgrade. That way, you can make getting a new iPhone as inexpensive as possible.
By the time you get a new one, ensure you are cautious with your phone. You don’t want history repeating itself. The best form is prevention after all. Even with Apple’s latest upgrades in terms of getting the best water-resistant iPhones possible, an iPhone remains an electronic device.
While we have tried our best to enlighten you on the status of iPhone 8 being waterproof or water-resistant, we hope care is taken in your treatment of your precious device. do let us know your opinion on this via the comment section.